ZIPPY Flightmax 4000mAh 3S1P 40C

 Snake92 28 points

Sure you can use this charger but if you are into RC for the long haul I suggest that you get the HobbyKing ECO8 150W 7A 8S Bal/Dis/Cyc Charger w/ acc. All you have to add the XT-60 to HXT 4mm Battery Adapter Lead (2pc) and you can charge anything under the sun up to 8S. This is the best option. The URLS are : www.link : www.link

 Snake92 28 points

This one is even better because you do not need a power www.link

 Rose 1 points

my experience with zippy some of the older packs cme with 14 most of them nowhave 12 awg

 Boaterguy 68 points

They are 12 AWG wire. I think they should be 10 or 8 AWG seeing as they can discharge up to 160A

 Alexander 4 points

its ok

 Jason 1 points

I use this battery in my slash 4x4 it has tons of power and long run time. I see no side effects from the 12AWG compared to a similar 10AWG battery.

 Sylvain 124 points

By the way, for Aircraft/Heli users, I don't think your going to use something that draws 160 A for a long period. Also, IMO, the continuous C rate displayed by the manufacturer should not be considered as a standard continous C rate. This may be right for the first few cycles, but after...don't even think about drawing that A...For good results, I consider a battery C rate that is at least twice as the max application. Doing so, you'll be able to throw dozens of cycles.

 boss-fet 265 points

Yes these are 50-51mm wide plus a few more mm wider for the wires in the front. Just about all 4000-5000mah packs from here are to wide for most 1/10 scale land use. Unless you want to do some mods that make your chasis weak usually.

 karmonkey 110 points

they will not fit your sc10, the width in some points reach 52-53mm.... hobbyking is wrong and the true weight is 362gr-365gr, i got 4 of these batterys and i have measured all!!