USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Turnigy 620DMG+HS High Torque Digital Servo (MG) 10.6kg / .13sec / 52g
Turnigy 620DMG+HS High Torque Digital Servo (Metal Gear)10.6kg / .13sec / 52g
Double ball bearing (Si-oil)
CE Certified Strong 3 Pole Motor
Heavy duty sealed water proof case
Alloy heatsink
Digital signal design with 100% fitting square PWS
Automatic measures central ms
ALU 6061 alloy and C95 gear material
Digital IC (SOP package with 12bits transfer data)
MOS-FET driver (spirited driver able to push over 7A power)
Weight: 52g / 1.84oz Dimensions: 40.5 x 20 x 42mm / 1.60" x 0.78" x 1.62" Torque At 6.0V: 10.6kg/cm , 190 oz/in Speed At 6.0V: 0.13 sec / 60° at no load
In that case set the switch to 6 Volts and you shouldn't have any problems. I run these servos on 26cc petrol powered aircraft and had over 25 hours of trouble free operation.
Jitter is kind of vibration due to servo trying to find his neutral position. It is experienced sometime when the receiver is powered with 4.8v and never hapen when powered with 6.0v
Hello everyone, about these servants I had a problem, I have connected to my radio which is a Turnigy 9x, and give me problems, that make the game a bit as if there were interference, try them with another radio and all well, then I tried my radio (Turnigy 9x) with other servants and everything goes perfectly, you know what can I do??
Hello and thank you.
Hey there guys just dropped one of these into my Tamiya Hornet re-issue, and found that from first power up, it will go left right, left right etc as your wanting it, for about 3 seconds then it goes full lock to the right and stops responding ...
Anyone else have this problem ?.
Ivan
-I have the same prob.
I hooked this servo directly to the Naza.
My system started to beep and the was a bad smell and white smoke ..... ???!!!
Any idea anyone
Muito bom este servo, ideal para aeromodelos 3D, excelente qualidade, possui anel de seguranç*a nos braç*os de servo proporcionando maior seguranç*a. Muito resistente e nã*o queima fá*cil. Recomendo.
no its not core less is when there are no way of stripping the servo gears as it has a magnetic clutch inside that will relief the tension on gear for short period as not to strip the gears.
This is not a coreless servo. It is a very tough servo though, I use this on my rock crawler truck for months now and never broke gears. Very tough and waterproof servo.
These servos are not coreless. However skycraft is wrong with the description of a coreless servo. A coreless servo has not got a 3 pole winding around a iron core, it has the winding rotating around fixed magnets. This means the rotor is lighter and therefore can get up to speed faster, alowing the servo to react quicker than a cored servo. Coreless digital servos are fantastic for fast presition operation but are expensive and normally only used by top competion fliers and if as you say you ha
I have 7 of these and at 4-5V they jitter! at 6V they seem to be better but I'm worried.. what is causing the Jitter and what Voltage and AMP (BEC size) is should be using?
I have a plane with 8 of these in and I use a separaye UBEC set to 6 volts. I run all my 2.4Ghz radio equipment on 6 Volts as you have less chance of Brown out and it reduces current draw. Watt's Law show that for a given power the higher the voltage the lower the current. Also with the higher Voltage the servo torque and speed is higher.
i use on a raptor 30 with no issues, would use on something larger without hesitation. just watch the depth of the servo, and align style frame the servos would need to be spaced away from the frame to fit!
It's a very specific question, maybe you should ask lynxmotion. Lynxmotion SSC32 manual says: "Apply 4.8vdc to 6.0vdc for most analog or digital servos"
But only Lynxmotion can answer you safely.
The weight of these package is right? I received 5 servos this week and weighted on package of servos and the weight of each one closed in the package is 85,3 grams.
Hi mate, Yes the package weight is alway over estimated for HK to avoid paying more and make a few extra $$ to the price of the goods. But Still cheaper than others. we shouldn't complain. No worries.
Turnigy normally -> Working frequence: 1520µs / 333hz
Customer Reviews
Overall Rating
elcuervo81
22 likes
Value
UNRATED
Quality
UNRATED
11 thumbs up!
muy bueno! www.link
7 comments. Reply..
Overall Rating
stevek
67 likes
Value
UNRATED
Quality
UNRATED
9 thumbs up!
useing these servo's in a 50cc powered katana , on elevators and alirons , fantastic no problems at all ,useing 1.5 inch alloy servo arms really throws the control surfaces to the max, i have no problem buying more off these, in the future
4 comments. Reply..
Overall Rating
asehr@yandex.ru
17 likes
Value
UNRATED
Quality
UNRATED
4 thumbs up!
Fine the most optimum variant at me they are established on Chypmank 120, Extra 330 50 cc, Cessna 310, Yak 54
No comments. Reply..
Overall Rating
Customer
45 likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
I have these on a 50cc yak 54 on the ailerons and elevator using max deflection. I opened them up and added more grease when they were new, and i just opened them after 50 flights to check on the gears. The gears show no sighn of wear, tight as the day i got them. when the servos were new they did some slight studdering when i moved from full left to full right, not sure why but that went away after 3 flights, maybe the added grease had to spread
3 comments. Reply..
Overall Rating
Customer
20 likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
Die sind gut, die sind schnell aber unglcklicherweise ziehen die anstndig Strom, deutlich mehr als vergleichbare der Konkurrenz. Das sollte man unbedingt bercksichtigen wenn man mehrere einsetzen will...
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
