Turnigy MG930 Digital Metal Gear Servo 3.6kg / 26g / 0.14sec

 joshd 14 points

www.link

 ASTRECORD 46 points

if you really want them i think you should do that

 Prop buster 82 points

There was stock. I ordered a bunch. But they disappeared very fast.

 ASTRECORD 46 points

Because there are very good servo for T-REX 500 HELI

 RC2all 3 points

Same happend to me, after ordering the stock disappeared. As this is the only efordable servo that dispensarium a 500 heli, there should be plenty of stock.

 Raphael 5 points

me too :( was in stock but it says my order is backorder

 Overfill 143 points

What, I have paid mine in dec 2012 and still wait

 ASTRECORD 46 points

you should buy them now when they are out of shock so when hk get get them back in stock they will ship them out right away , so you don't have to worry you keep missing them out

 ASTRECORD 46 points

these are about 1520us

 Molari 13 points

Weeks? It has been months!

 ROLANDO 1 points

It was on stock for a few hours. After that all gone. HK what does that tell you? If you have more you can sell more! Duh..........

 Molari 13 points

43 pieces where on stock. You had about 22 hours...

 Vladimirs 8 points

Ofcourse you can

 Vladimirs 8 points

Turnigy S3317M Servo 26g / 3.0kg

 dangro 17 points

I have 3 pcs pdf them, but ive Never used them because of the Bad quality... Probably you should Choose some other servos.

 Rotceh_dnih 16 points

aw man now ya got me unsure about these servos , i read alot of people swear by them

 dangro 17 points

the upper and the lower parts of the case are not hinged, so they twist, the zero position is not so exact... i tried them in a 500 size heli and it was not that fun to fly. now i have some savö*x servos and the heli is doing what i want, and not what the servos want to do...

 Molari 13 points

I used them too, didn't need a click of subtrim on all of them. They perform and centered very well but are not the most reliable servo's. Two out of five malfunctioned during preflight check within six months. Will buy again though.

 Rotceh_dnih 16 points

Thanks you've eased my mind some , however i feel like im never going to get my order this "10-14 days" is cake! is there any way to get the real ETA for items?

 Rotceh_dnih 16 points

well i have asked and im sad to say HK don't even know how long , at least 2 weeks but could be 3,4,5,6,7 or up to 8 weeks till these servos are back in stock. maybe cya next year :(

 honore 4 points

use 1520us frequency not 720us

 Chris 8 points

The frequency is 300-333hz. I've even used at 200hz with a BeastX and it worked fine.

 CoreyH 18 points

Futaba servo arms work on these servo's yes

 Chris 8 points

Yes, a very close copy of the Futaba servo, the arms fit perfect just be sure to use the screws that come with the servo for the centre.

 Chris 8 points

Aslong as your voltage doesn't go over 6.0 it should be fine.

 Slopehog 1 points

Use a high speed gyro servo it will give you quicker response ive got the TGY-S306G in my 500 tail and it works a treat

 TheScud 26 points

Slopehog is exactly correct - you would probably want faster in a 500 series performance heli.. However, the MG930 is a fantastic little servo, and honestly, I think it's better than many out there for double/triple the price. It would certainly work as a tail servo, just not as potentially fast as a real high-speed. FYI, since the question is about the MG930 particularly, I can tell you the MG930 has a particularly GOOD resolution, and that's why it's better than so many others out there, ev

 Rmhjets 13 points

I have them in my 500 but it is too slow unless you just want to hover

 lefevre 24 points

mrche tres bien c servos sur mon 500 pas de probleme

 Robert 1 points

I have actually been using this servo on the tail of my 500 for quite some time now and I have no complaints so far. www.link

 Johan 15 points

I think standard JR horns fit onto it.

 Robert 1 points

Let me know if they do!

 DerClown 44 points

Actualy this servo use Futaba horns. I already changed mine stock ones to Futaba ones.

 BernardoUruguay 259 points

Yes. Check you car´s torque requirements just in case. Bye

 aaron 2 points

thanks bro

 Helmut 7 points

???? entweder oder

 el_xero 24 points

never mind guys some one already has this listed at 1520us 333Hz thanks!

 Peter 5 points

333Hz. 1520us.

 Federico 5 points

I have not seen spares on HK

 Peter 5 points

here is the link for Turnigy spare www.link there aren´t parts for your MG930 - perhaps you should ask the support-team! I have seen it on eb.. too!

 fireball412 414 points

It definitely is. It is may be the most precise and powerful servo sold by HK. Of course, the size of the plane must match. It is good for gliders with 3m wing span and motor models with around 1.5m wing span. Just a rough estimate.

 hugrp 1 points

Yes, besides being a great servo to helicopter will also serve perfectly in your aircraft

 kekelala 307 points

I use these on 2m 26cc cub with no issue.

 fireball412 414 points

It is exactly 27.1g with wires and servo arm.

 cyberbug001 2 points

53g is the total weight with the packaging, servo arms and hardware.

 Peter 5 points

26gr. 53gr is within package.

 BernardoUruguay 259 points

333Mhz 1520us. The red light has to flash only once. Please credit me if this is useful