USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Turnigy Brushless 1/8 Scale Car Power System 2000KV/150A
An extremely powerful brushless system for any 1/8 scale truck, car or buggy. Equiped with cooling fan and a large surge ESC, this system will greatly increase the power output of any standard system.
ESC Spec. Continuous Current: 150A Burst Current: 1080A Resistance: 0.0002ohm Suitable Car: 1/5 or 1/8 on and off road.
hi would this setup be an equivalent to the Hpi Blur120A and Hpi tork 2200kv brushless system used in a hpi savage flux hp im wanting to convert my savage xl into brushless and looking for around the same horsepower and speed as th bigblock 5.9 engine if anyone could help that would be great thanks
It will work perfectly. this combo has more power that you can handle. for truggys and MT the 2000kv version is better than 2200kv, because it has more torque. I use it in a 1/8 truggy with punch mode level 1 and 5S and never had more power and speed without overheating!
Enters program mode direktly, everytime i try to turn on as dekribed in manual. Stearing responds correktly and i have set lipovalue manually with program card. PLEASE HLEP! Brand new and unused!
I'm running an inferno GT2 and i'm willing to change the motor to something more powerful. Is this combo will be okay for it witht he right LiPo (6s) ?
How come it only says the max current of motor is 76Amp ? Will it burn if I use a 4s lipo which has current higher than that? for example 4s2p 6000mah 60c. Anyone please reply, thank you!
No you will be okay, the battery should always be much higher in capacity then you plan to deliver. This motor under normal heavy draw, will "ask" for 76 amps, ensure your esc and and battery can provide this and you will be fine unless you run it wide open constantly, nothing likes that.
I am running this in a Revo 3.3 converted. I am running a 16T Pinion and a 40T Spur. It has plenty of speed and still wheel stands on demand. I am running a Turnigy Nano-Tech 4S Lipo.
Boa noite Martin.M!
Nã*o sei como fazer esta conversã*o, mas o motor em questã*o é* este acima, eu vou coloca-lo em uma summit 1/10,me ajudem por favor,preciso saber quantos "c" de descarga seria o ideal para este motor.
Boa noite gente , preciso sabe? comprei este combo e estou na duvida da bateria,vou comprar com pelo menos 4000 mah mas eu nã*o sei com quantos "c" de descarga eu posso adquirir, me ajudem! qual é* a melhor bateria para este combo?
I've got this setup in a e revo with 4s lipo ran a couple times now its cogging and the esc ain't beeping. when I turn it on the esc flashes red,green,green. is it the esc or the motor? Can it be fixed or is it broken?
You need to change the gearing. Cogging is cause by the motor not being able to turn at a dead stop. I'm betting that if you pick it up it will turn the wheels without a problem. If so you'll need to reduce the pinion a tooth or 2.
Its not the gearing The motor is cogging even when the motor and esc is out the car with no resistance. It was working for a couple months and the motor never ran hot one day just started cogging
Did you get the ESC wet, or could there be dirt int he motor? In either case if the ESC got wet it's caused shorting but not to the extent that the ESC won't initiate. Or you have something in the motor that is causing a similar issue. Worst case is you won't be able to fix it on your own and have to send it in.
Hi how does this compare to the newer turnigy waterproof kits 1/8 ?? they are half the price and have higher kv with bigger amp draw ? does that mean they are faster then this one?
XO-1 I have a turnigy 150a 2000kv system will this system be good for my XO-1 the stock motor was a 1650kv castle system motor burned out don't want to pay 150 to replace it
Forgot to mention if your temps do start getting up there but U like the perfomance, as geared, U can always add a heatsink fan combo for $20-$25 to bring motor temps back in range.
or 5 $ here on hobbyking.. i got it and it fits perfect on this motor ?
Customer Reviews
Overall Rating
Proteuz
47 likes
Value
UNRATED
Quality
UNRATED
1 thumbs up!
I used this in my TNX5.2r as a replacement for the stock nitro engine. Took a E-Revo tranny and im running 21T pinion on the stock tranny spur gear. I've run this for close to 7 months now and i've not had any problems with it. Running on 4s lipo and the engine has no problems with this lipo setup. Grate ECS with plenty of programming options using the programming card. The only downside i can see is if you run the engine above 4s.
3 comments. Reply..
Overall Rating
Customer
83 likes
Value
UNRATED
Quality
UNRATED
1 thumbs up!
I have run a castle creations mamba monster. I'll say right now this setup makes CC it's bitch. and it costs half as much money. I used to be a loyal CC customer until i spent 300$ for a 1/8 scale mamba monster system . I used to buy CC because they advertise heavily MADE IN USA and I try to show some loyalty to the local manufacturers. My mamba system had made in China all over it. Turnigy stuff rocks and works good as any brand I have ever used
21 comments. Reply..
Overall Rating
Customer
83 likes
Value
UNRATED
Quality
UNRATED
Like it?
One more thing to add. I am running Turnigy ESC's motors and batteries in aircraft, helis, cars, and boats. Their quality is second to none and nobody touches their price. I have seen people complain about turnigy stuff and usually they under engineered their system. I have no complaints about this company except harshly marked up shipping costs. If they got that straightened out I would use them as my main source.
1 comment. Reply..
Overall Rating
jvgjvg
70 likes
Value
UNRATED
Quality
UNRATED
Like it?
i only have this esc from hobbywing it's the same as the turnigy. It's simply the best esc for 1/8 scale cars i have ever had. i had the novak, mgm compro, castle MMM. the construction of this esc is very strong!
2 comments. Reply..
Overall Rating
Johan Engman
11 likes
Value
UNRATED
Quality
UNRATED
Like it?
Running this in a stock Traxxas E-Maxx #3905. Excellent power. Running with 2x2S Rhino, for a total of 4S (14,8v). Insane power! No heat issues!
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
