USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Bonjour,
Pouvez me dire quand ces moteurs seront disponibles SVP
ces moteurs sont e'xcellents je n'utilise que ceux la, mais ils sont indiponibles depuis un moment et j'en ai besoin
Merci et fé*licitation pour la qualité*
Hi all,
Can anyone tell me a suitable ESC for me for this motor. Some of the suitable ESCs are sold out. My other question is If I really need to have a program card for ESC, I would like to buy that too
SKU: 261000002 This is the one I would use, I have had excellent luck with these. These blue ones use the round programming card, but you shouldn't need it. They run great as they come.
Depends on the weight an wingspan. I use it in a fox rc conversion. it runs with 2s 500mAh and a 6x4 folding prop very well. wingspan is around 35cm and weight is 130g i think.
This motor is way too small for that plane. That plane weighs 650 grams. I have that plane, I used this motor in it,L2210-1650,it screams. I used the 8x4 inexpensive hobbyking props that come in a pack of 5, goes vertical easily. you will need a 25 or 30 amp speed controller also. Let me know and I will suggest one. Happy flying!
Well depends on what you put it in. I put this in my EFlite Beast and it flies better than the stock motor. That plane weighs only a few grams, maybe an ounce or two. Very quick and agile plane and I don't see any lag when doing acrobatics with it.
These motors are perfect for running my tail motor on my electric heli. Working as a DD, the heli flys like a dream. Will buy more soon. Thanks to the Turnigy Brand.
No comments. Reply..
Overall Rating
Ernesto Kortright
16 likes
Value
UNRATED
Quality
UNRATED
3 thumbs up!
This little gem substitutes one of my gws IPS-a motors and what weight savings! The prop saver works with my gws 8043 prop and gives about 4 ounces of thrust. I used it with the turnigy plush 10 amp controller and it's smooth as silk. This little motor never got hot. FYI, the bullet connectors are short 2mm. Only issue: you need a super tiny hex key to tighten the prop saverI used a tiny screwdriver. Also you need screws for the mount. Great little motor at great price! Thanks HCity!
3 comments. Reply..
Overall Rating
Ernesto Kortright
16 likes
Value
UNRATED
Quality
UNRATED
Like it?
This little gem substitutes one of my gws IPS-a motors and what weight savings! The prop saver works with my gws 8043 prop and gives about 4 ounces of thrust. I used it with the turnigy plush 10 amp controller and it's smooth as silk. This little motor never got hot. FYI, the bullet connectors are short 2mm. Only issue: you need a super tiny hex key to tighten the prop saverI used a tiny screwdriver. Also you need screws for the mount. Great little motor at great price! Thanks HCity!
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
