USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Does this thing clog repeatedly? requiring one to cut a bit off the end .. every day! Just Like the other add on tips?
One used to be able to buy lengths of fine Teflon tubing. It almost Never clogged with dried CA
I have on occasion been able to use one repeatedly, I learned that if you store it straight up the CA usually runs out. But most of the time I only get a one time use, no big deal for me. The nice thing about these is that at 1 gram it tops off an order nicely. When I ran out of these I used 2mm heat shrink once, it worked ok but not as fine as these. . . .
Well yes and no. If you use it and then store it as is, it does. However once you are done using it tap the nozzle base with your fingernail/pencil. You will see the level drop off
Once it goes past the thin capillary ...yo u are good. I generally squeeze to let the extra glue out and wipe it off nicely. Never clogs that ways. To be safe try putting a small piece of paper that will stick to the residue
Next time just pierce it as you would for a new one. Or just pull it off using fingernail. It will come off with the dry glue, leaving the nozzle intact
yes it does fit evotite foam safe ca my friend, go for it there great for getting yer glue into small area's and the glue dont flow out of the bottle so fast like all ca seems to do
It use to say stock updated every 30 days when I checked last and I have been tracking it for the past 25 days, So I am hoping that it would be back in stock by 27th June or max by 1st July 2011
These are really nice extensions and a must have if you want thin CA to go only in the place you want it. Use them to fill up any order. They always come in handy.
Hiya O teo, these Ex-long CA Tips are back in stock now. I bought a bunch to ensure i will not be waiting years for them :) Get some now bro, quick. They are cheap and sooo light they dont add to your postage :) Good luck my friend.
These are the best way to get the CA just where you want it without wasting glue. The tip is 68.73mm long, the top diameter is 6.5mm, and the bottom where the glue comes out is 0.51mm in diameter. The tip can be cut to adapt to your gluing needs.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved