Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Helicopters & Parts > Helicopter Blades > Tail Blades

  RATED:

60mm Carbon Fiber Tail Blade (1pair)

60mm Carbon Fiber Tail Blade (1pair)

60mm Size Carbon Fiber Tail Blade (1pair)

Spec;
Length: 60mm
Weight: 1.5g each
Grip: 2.8mm


PRODUCT ID: CF450


This is an archived page. This product is no longer available and has been replaced by a newer product.
CLICK HERE TO VIEW THE NEW PRODUCT

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
4192
crowns
  
 
Total of 5 discussions.
po_au  651 points - 11/20/2009
 
Hobbycity replaced the original better quality one with rough one no longer worth buying in my opinion. The blades are way too wide - 2~2.5mm wider. Mine came with cracks.
NOT THE SAME ONE SHOWN IN THE PICTURE! BEWARE! Very disappointed. - 20th Nov 09
 Lanell 195 points
I have bought in the past but I have some on the way (Sept. 1st 2010). Hope this is not the case for me. I will check back!
supergps  150 points - 9/25/2009
 
The description says 450 *mm* CF blade
:)
Lanell  195 points - 6/5/2009
 
I bought a pair and I thought they were great. They fit perfect on the HK450. I suggest check balancing anyway, because they cant all be perfect.
AlvaroSpain1971  225 points -
 
HI, can anybody tell me if these blades are direct spare for T-rex 450??
 ppxav 1233 points
seems they are ok for rex450
cheers
 Beamers 87 points
Yes, those are for 450 class Heli. I had used, that seemed oke than standard plastic blade, but you have to slightly balance before use.
 Codesource 82 points
How do you correct balance on a 1.5 gram blade? Do you add tape?
Thanks...
 Arvin 27 points
Tape, or file the heavier Blade.
Customer Reviews
Overall Rating
Customer
28 likes
ValueUNRATED
QualityUNRATED
16 thumbs up!
finch was not the best , loots of sanding needed both to get into the blade holder and to smooth the edges as they was rather bad

if you want carbon blade and don't care abaut if they are perfect its OK,

but Finnish is not OK as i ordered 2 pair and one pair was better but still need sanding. but as price is low you get what you pay

regards Jonas


No comments. Reply..

Overall Rating
Mad Marsa
221 likes
ValueUNRATED
QualityUNRATED
15 thumbs up!
This blades may be changed the specification.
Today, I got that not same as this pic.


No comments. Reply..

Overall Rating
Ramon Poronga
59 likes
ValueUNRATED
QualityUNRATED
8 thumbs up!
The tail blades that I received are of poor quality. One of the blades is 1.5mm wider and 0.2 mm thicker than the other one! Obviously, they are way out of balance.
HobbyCity requires that defective items be shipped back to HK for inspection, but the shippig cost is higher than the price of these blades.
Essentially, I'll have to throw them away.


No comments. Reply..

Overall Rating
Tancho
36 likes
ValueUNRATED
QualityUNRATED
7 thumbs up!
Great blades they fit perfect in Blade 400 3d tail


No comments. Reply..

Overall Rating
po_au
490 likes
ValueUNRATED
QualityUNRATED
7 thumbs up!
well, i found these blades came with some scratches, but that didn't quite concern me until i discover that one of the blade is thicker than the other where you mount the blade to heli (by like 0.5mm). The difference is big enough making it didn't fit into blade holder. I had to sand off 0.5mm then rebalance the blades again...


No comments. Reply..

.....click here to see all reviews
Aff. Link