USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
hey guys , does anyone know exactly what is the shaft diameter size, without the prop saver on ? tring to convert my little airhogs bluesky into a brushless.give it some zip !!!I whant to install a 2.5 x 1 prop on it is a 1 mm center hole. thanks guyshttp://www.hobbyking.com/hobbyking/store/images/ em_cool.gif
hey guys, im new to this, im looking for a brushless motor for my nine eagles xtra 300, can you guys give me some advise please? how would a: AX 1306N 2200kv Brushless Micro Motor (9g),, peform in my plane? thnax
you would be better off running a small 2s lipo with this application cox has some new batteries they sell that would be perfect for this motor also i would run a 6A esc on this one.
No rubber ring for the prop saver included. Anyone knows which ring to use? I tried several and they all were WAY too big for this really tiny motor. So, where do I get an appropriate ring from?
I have a AX 1306N 2200kv Brushless Micro Motor I use with a 2S lipo 450 maH and 10amp speed control. I have it mounted on a 24" depron flying wing. It works pretty well for about a minute or less of flying then starts to lose power. I'm using a 5x3 prop. I tried a 4.5 x 4 prop with the same results. Do I need to get a larger prop or is the motor defective?
Thanks
hi, current max continuous ? j use this motor with 4x4 gws prop with a flywing wing for pylon racing indoor in France only 2A with 2S lipo 240ma G3 hyperion can accept more continuous current ?
Need more specs on this. Like what voltage and amp range, etc...
Customer Reviews
Overall Rating
fporte
24 likes
Value
UNRATED
Quality
UNRATED
10 thumbs up!
Very good motor so far! Small, light and powerful enough on a MPX Fox, turning a GWS 5*3 propeller (built-in propsaver) and using a Turnigy plush 6A ESC. Unusual motor mount but no problem with it. Be careful when manipulating wires, those are very tiny!
No comments. Reply..
Overall Rating
Marco Antonio Borra
113 likes
Value
UNRATED
Quality
UNRATED
6 thumbs up!
Super motore!!! Molto potente,gira tranquillamente una 6x3 con circa 3amp.di assorbimentoECCELLENTE.
No comments. Reply..
Overall Rating
Customer
30 likes
Value
UNRATED
Quality
UNRATED
3 thumbs up!
super Motor dreht eine gws 6x3 mit 9300 U/min bei 2,8Ampere.700U/min mehr als der 1811 motor und dazu noch 2 gramm leichter
No comments. Reply..
Overall Rating
DOCA-SP
2074 likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
Excelente motor, melhor do que os turnigy de 11gramas... o problema o preo que o dobro.
No comments. Reply..
Overall Rating
phil alvirez
21 likes
Value
UNRATED
Quality
UNRATED
1 thumbs up!
great motor! just look at the winds: perfect! it has the best winds i have ever seen. and it is a fcat that efficiency improves with how well the winds are done. congratulations, hobby king. it is good to know that finally someone is paying attention to this fact, even if they have to pay more for this to be done. as soon as i testit i will post here the figures.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
.jpg){kind=small}
