2mm Gold Connectors 10 pairs (20pc)

 fireball412 414 points

Yes, 18A is absolutely OK. For 20-80A I would use 4mm and for >80A 6mm connectors.

 Ryan 112 points

they will definitively work with the 24 gram motor as for the esc most of the time they don't come with connectors so you can easily match the motor to the esc. If it does have connectors it usually says what type they are in the product description.

 Schorch 146 points

Yes, they are the correct ones for the balancer jack.

 jzzto 156 points

Using this battery as example: ZIPPY Flightmax 4000mAh 2S1P 30C hardcase pack There is a 4mm and the white plug* if it is the white one, you should use a balance lead from your connector to JST-XH* you will find them on Battery_Chargers_Acc_ -> Balance_Leads regards.-

 louigi600 218 points

Upto 30A these connectors will do fine ... if you need more current you might like to use bigger ones.

 FOSSAERT 10 points

Connecteurs de qualité , pour ma part je les est mis entre mes moteurs et variateurs et je n'est jamais eu de soucis ...

 Stephen 2 points

As per Schorch, yes they are designed for the center balance port on a 2 cell hard case Lipo. I have bought some from HK and they are perfect !

 fireball412 414 points

yes they will. The current rating is sufficient as well.

 Mrudang 24 points

yes they will...i have used them and they work just fine

 louigi600 218 points

The will surly work but they will be a little oversice for the micro-t. They are the correct size for a mini-t.

 EDWARD 71 points

I am using a lot of these handling from 6A ESC to around 30A ESC's, never had a problem. Ideal for up to 300W uses such as micro or indoor planes.

 TechnoFinder 126 points

no issues i even use this for a parkjet equipped with FC 28-12 Brushless Outrunner 1534kv

 nikomish 4 points

Yes!

 Gerben 520 points

The voltage is not the issue, the question is what kind of current you are planning to draw through these. Count on a maximum of about 10Amps.
Regards,
Gerben

 The General - x5 140 points

Actually I tested 18 amps before they get warmt to the touch...but then the wire melted so I don't know where it would fail....

 Sarapintas 34 points

I use it with 22A max no prob.

 shiham 60 points

hi mate , sorry to say this is not the correct spot for you to share your buddy code , when hobbyking see this they will edit this post , but you can share your buddy code on the forum on buddy code section .

 Rboxx 10 points

Yes, people already explain it to me. Sorry, i didn't konw this before! And i can't delete my post :(

 shiham 60 points

its ok , make sure you post it on the forum next time .

 Jaroslav 1 points

moc dobrý konektor ca cenu,dobrá práce s ním dobre se pájí

 ElectricAussie 2779 points

Each half (M and F) is approx. 15mm long. When joined, the assembled connection is approx. 20mm long. Cheers!

 FRANCISCO RAUL 1 points

ok muy buen precio y calidad

 Helimaniacos 899 points

approx 20mm

 EugenS 5 points

18mm mom
16,5 dad

 handyjap 194 points

Male connector: 16.6mm* Hole in Back of Male: 4.6mm* Female connector: 17.2mm* Hole in Back of Female:4.2mm* Combined: 23.2mm

 Kris... 279 points

Can take up to 3 or 4 weeks sometime but dont worry they will turn up in the end i waited 2 months for mine.

 prateek 66 points

it takes time my friend ! i can feel your pain my order was also stuck but what i did was not to order them and use the ones from other motors/esc's

 Stig H. 6 points

I have been waiting for 23 days now - still there is hope they will turn up.

 fideliovienna 17 points

Yeah, so much to say "arriving every two weeks". Im waiting for them now since 28 days (also für the 4mm plug) and still both do not show up.

 rlmiller 5 points

They'll be available when HobbyKing gets them from the supplier. Unfortunately, that may be a week or two, or a month or two, you never know. If you need something right away, I always get it locally. If you can wait, the price difference may be worthwhile.

 Robinn 24 points

It is Available :D

 madruga 89 points

Some products are sold in a very large amount, when they are already sent to meet pending applications or are bought by customers on duty on the internet. make your request on backorder and when it arrives in stock you will be met with certainty

 rcsupercarz 9 points

It will be available when they have in stock. If you dont want to wait, visit your local hobby shop.

 3D Romeo 54 points

It's in stock right now...or at least it was when it reserved it in my last order.

 David 2 points

I'm still waiting for them myself

 Chin Keat 82 points

it is available now, quickily grap it before it is backorder again.

 GooberSB 24 points

You can "watch this item" and get an email sent when they arrive in stock. BUT, since popular items sell out very quickly, you could always place an order for these items and nothing else. It will go on backorder and won't ship until the items come in but at least you will be in the queue to get some first. That's what the -15 or -21 numbers are: that many orders are placed for an item on backorder and will be filled first before anybody else gets to order any.

 Hansc 373 points

get stock notification

 pyropete 23 points

Now 1-21-11

 chmel 1 points

This 15x60x39mm

 Foam builder 29 points

I use these on everything but my lightest micro models, and they are very reliable. Just got another order of 100 today!!!!!!

 thunderchicken 90 points

only the 3.5 mm . fatter but much shorter installed length .

 Brenda 11 points

Depend on what your using them for. If its on a battery you could use a deans, ec3, or xt60,or any of hk other connectors. but if you are using it for the esc or motor you coul can only go bigger or smaller for bullet connectors their pretty much all the same.

 tommo85 142 points

Yes i agree that they are unnecessarily long. Nice solid firm fit though.

 GRAHAM 168 points

Agreed. I want to set-up a micro plane. Have bought 14dia motors. these plugs take too much room, and are too much weight. will now have to solder motor to esc.

 rafmos 1657 points

I think it is besouse they are good selled. A lot of people like theese.

 Pygar 322 points

This is gold man....

 sylvainfz6 374 points

for my lipo and controlled