Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > ZIPPY Lipoly
> Batteries & Accessories > 25C Discharge

  RATED:

ZIPPY Flightmax 1000mAh 3S1P 25C

ZIPPY Flightmax 1000mAh 3S1P 25C

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!

Spec.
Capacity: 1000mAh
Voltage: 3S1P / 3 Cell / 11.1v
Discharge: 25C Constant / 35C Burst
Weight: 82g (including wire, plug & shrink wrap)
Dimensions: 73x33x18mm
Balance Plug: JST-XH
Discharge plug: 2 Pin Mini JST Plug


PRODUCT ID: Z10003S25C

This product available from a warehouse near you!

Capacity(mAh) 1000
Config (s) 3
Discharge (c) 25
Weight (g) 82
Max Charge Rate (C) 2
Length-A(mm) 73
Height-B(mm) 33
Width-C(mm) 18
Update/Add my own data
Customer Data

Weight: 120g
Quantity: 
International Warehouse
stock
10+
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price $5.85

acc.
  • Turnigy Soft Silicone Lipo Battery Protector (Clear) 74x36x21mm

    Combo Price: $0.95   IN STOCK

  • Turnigy Soft Silicone Lipo Battery Protector (Green) 74x36x21mm

    Combo Price: $1.07   IN STOCK

  • Turnigy Soft Silicone Lipo Battery Protector (Red) 74x36x21mm

    Combo Price: $1.07   IN STOCK

  • Turnigy Soft Silicone Lipo Battery Protector (White) 74x36x21mm

    Combo Price: $0.95   IN STOCK

  • JST Female 2 pin connector set (10pcs/set)

    Combo Price: $0.80   IN STOCK

  • Turnigy Soft Silicone Lipo Battery Protector (Black) 74x36x21mm

    Combo Price: $1.07   IN STOCK

  • Turnigy Soft Silicone Lipo Battery Protector (Blue) 74x36x21mm

    Combo Price: $0.95   IN STOCK

  • JST Male 2 pin connector set (10pcs/set)

    Combo Price: $1.00   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated
5270
crowns
  
 
Total of 18 discussions.
Mike  1 points - 6/14/2014
 
Is this good for HK Reaktor 3D?
 AlbEagle007 552 points
Yes it is good, but I would prefer Turnigy Nano-Tech 850 mAh 3S.
BEST ANSWER CREDIT AWARDED
Robert  1 points - 12/31/2013
 
i use the turnigy nano tech lipo charger as it can check the balance charge and discharge
shaun  3 points - 7/19/2013
 
I'm new to this. what type of connecter is needed for the esc and what type of charger would I need to get. and were would I be looking to see this in the specs? thanks to whoever helps me out
 red24d 20 points
Connector choice is completely up to you. My personal rule is if the battery needs to be light and has less than 1000mah, then put a JST connector on it and the ESC. The heavier the battery and higher the "C" rating, you'll want a more heavy duty connector that can handle the heat without melting. My preference all the way up to my 5S 3300mah battery is Deans connecters (also known here as nylon "T" connectors). If this helps, hit the thumbs up next to my name!
 red24d 20 points
Correcting my previous..... this battery comes with a JST connector. You'll need the matching JST for the ESC.
Joseph  1 points - 5/18/2013
 
The Turnigy 2S 3S Balancer Charger. Direct 110/240v Input
is extremely easy to use and reliable.
The TGY-3 Balance charger from Turnigy makes charging 2 or 3S lipos from your 110v or 240v mains power supply a simple task!
China is flooded with cheap chargers made from unknown manufacturers, giving inconsistent results. Rest assured this product is reliable, includes warranty and comes with the correct documentation.

Spec.
Input: 110v or 240v A/C (50/60Hz)
Output: 650mA per cell
CE, FCC Certified.

PRODUCT ID: TGY-3
Joseph  1 points - 5/18/2013
 
The Turnigy 2S 3S Balancer Charger. Direct 110/240v Input
is extremely easy to use and reliable.

The TGY-3 Balance charger from Turnigy makes charging 2 or 3S lipos from your 110v or 240v mains power supply a simple task!

China is flooded with cheap chargers made from unknown manufacturers, giving inconsistent results. Rest assured this product is reliable, includes warranty and comes with the correct documentation.

Spec.
Input: 110v or 240v A/C (50/60Hz)
Output: 650mA per cell
CE, FCC Certified.

PRODUCT ID: TGY-3
Customer Reviews
Create an account
Overall Rating
Saurabh
19760 likes
ValueUNRATED
QualityUNRATED
64 thumbs up!
Very good battery with plenty of power. Use it on a foamy of around 500 grams. You can do 3D. I am using this on a towerpro combo with 2409-18T and 25 amps ESC


1 comment. Reply..

Overall Rating
Carlos Salceda Palacios
likes
ValueUNRATED
QualityUNRATED
35 thumbs up!
I buyed 2 units to try.

-These cells are overrated by 10pcnt.
-After 3 cycles C/D to break at 1C:

Best charge: lipo 1: 911Mah
lipo 2: 923Mah

Best discharge: lipo 1: 899Mah
lipo 2: 901Mah

They seems to be a good&strong battery for aplications about 15-18A at a unbateable price.

Good deal!!


No comments. Reply..

Overall Rating
Miroslav
70 likes
ValueUNRATED
QualityUNRATED
26 thumbs up!
I was pleasantly surprised. Flashlights comply with the description and holding capacity.


No comments. Reply..

Overall Rating
Ctibor Zajicek
likes
ValueUNRATED
QualityUNRATED
18 thumbs up!
Cheapest battery i have ever bought. I got 3 packs with cca 40 cycles each and works like new.
I use them in 420g 3D foamie with 200W motor (max 18A, 6,5A average). Flying allways on time limit and after flight I charge about 700-800 mAh. Same power during whole flight.... no fade at the end of flight.
100pcnt satisfaction :-)


No comments. Reply..

Overall Rating
Yuliy Serikov
likes
ValueUNRATED
QualityUNRATED
15 thumbs up!
good battery but it gets hot on 15 amps use so its not a 20C :)


1 comment. Reply..

.....click here to see all reviews
Aff. Link