Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Speed Controllers (ESC) > All Speed Controllers
> Speed Controllers (ESC) > 20-39A




Got an old brushed motor laying around and want to put it to good use?
The Turnigy brushed ESC is an excellent speed controller with a linear throttle curve, Lipoly/NiMh ready and programmable braking.

The break function can be turn on/off by the jumper
Battery type can be chosen by a jumper
For Lipo the threshold for each cell is 3.0v, less than the threshold ESC will gradually reduce the output power
PWM frequency is 2KHz
Over heat protection over 110C
Throttle signal loss for 1sec will gradually reduce the output power, after 2sec completely cut-off

Cont Current: 30A
Burst Current: 40A
BEC Mode: 5v/1A
Lipo Cells: 2-3
NiMH : 4-10
Weight: 21g
Size: 45x21x8mm


Shipped from:
International Warehouse



Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
Total of 229 discussions.
jpurcha  10 points - 10/3/2016
I have this hooked up to an old Hobby zone Stryker f-27B with the 480 canned motor. I'm trying a 3S lithium battery, I get the ailerons working but no motor functions at all. Any suggestions? Anyone have a instructions for this ESC? Jim
 jpurcha 10 points
Works now. I had the throttle cut off on. Jim
Santiago  2 points - 8/23/2016
Can i use it whith a brushless motor?
 Reece22 35 points
This esc is for brushed motors, if you need a 30amp brushless esc i have found (Product ID: TR_P30A) to be very good. An easy way to tell the difference between these in future is that brushed esc's have 2 motore output wires and brushless esc's have 3 motor outputs
danton999@gmail.  2 points - 8/20/2016
I am wiring this ECS to a stock brushed motor I have with a NiCd batter and an OrangeRx. When I connect the battery, the motor starts at full speed with the Tx at minimum or even with the Tx off! The wiring appears to be correct. What would cause the motor to start at full speed on batter connection??
 bgjbrok 78 points
Reverse throthle on your transmitter
ponsard  4 points - 4/12/2016
has this got reverse fonction? please
 Gary49 4595 points
Sorry, no, it is forwards only with optional brake, designed for use with aircraft with or without folding props.
ponsard  4 points - 4/12/2016
has this got reverse fonction? please
 Gary49 4595 points
Sorry, no, it is forwards only with optional brake, designed for use with aircraft with or without folding props.
Customer Reviews
Overall Rating
39 thumbs up!
Compre 4 de estos, los 4 funcionan muy bien, son mas pequeos de lo que me esperaba lo cual esta muy bien ya que use uno de ellos en un Striker y no hay mucho espacio, la respuesta de estos esc es muy buena y del precio, pues simplemente insuperable...

6 comments. Reply..

Overall Rating
doug gough
36 thumbs up!
great little piece of kit at a price that you cant say no to, I connected this to a hot can motor and ran it up to a 30amp draw for 5 mins and it didnt even get warm, Im very impressed at this price

4 comments. Reply..

Overall Rating
29 thumbs up!
I am very satisfied with this speed controller, very good quality for small price. I give 5 stars!!

No comments. Reply..

Overall Rating
25 thumbs up!

Most of my planes are actually brushless however, recently I decided to use stock can motors for a project. Of course, I needed a speed controller for brushed motors so I went looking around for a decent ESC around 30A. I happened to visit HobbyCity and found the Eagle 30A Brushed ESC and figured for the price, it is defiantly worth trying. My gamble paid off big dividends as the speed controller works great! Wish I had purchased most of my electronics from HC.

No comments. Reply..

Overall Rating
Marcelo Vaccaro
14 thumbs up!
Excelent product for the price...just $7.5

It comes with the option to turn break on and off with just a jumper.
Also suitable for Nimh and Lipo with also just a jumper.

My Super-Cub motor is pulling only 16amps so can't test the limits to the rated 30amps.

In spite of that the ESC stays pretty cool.

Just awesome product

4 comments. Reply.. here to see all reviews
Aff. Link