Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Multi-Rotors & Parts > Electronics
> Planes & Parts > Flight Stabilization
> Multi-Rotors & Parts > Flight Controller


Minim OSD v1.1 (US Warehouse)

Minim OSD v1.1  (US Warehouse)
Minim OSD v1.1  (US Warehouse)

This is a mini Arduino based on-screen display board. It's tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as small as possible.
It's main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FTDI-compatible 6-pin cable.

It features two independent power and ground sections to isolate the OSD's analog stage: a +5V section for the ATmega and the OSD's digital stage, powered through the FTDI cable or other +5V source; and a regulated +5V section for the OSD's analog stage, powered through the video in/out header and capable of handling up to +12V input.


• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• FTDI cable compatible pinout
• Standard 6-pin ISP header
• Two independent power sections with an LED indicator on each
• Solder jumpers for combining the power sections
• +5V 500mA regulator for up to +12V supply input (5-12v range)
• Solder jumper for PAL video option
• Exposed test points for HSYNC and LOS

Voltage: 5-12v
Dimensions: 50 x 18 x 10mm
Weight 4g 


Please see the file uploaded under the files tab for Developer credits, Links to source code and other information! 

*Note: This is not an original Arduino brand product.

PRODUCT ID: 387000015

Weight: 20g
USA West Warehouse
USA East Warehouse In Transit View Item
International Warehouse In Stock View Item
Price  $21.45

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated 5 crowns   
Total of 3 discussions.
ictea  1 points - 3/11/2015
MinimOSD comes with a connection cable with one black connector on one side and two smaller white connectors a 5pin and a 6pin. How do I connect the MinimOSD to the HK PilotMega 2.7? Do I put the 5pin white connector into the telemetry port of the PilotMega 2.7 located between O8 and A0? Also is the 6pin connector used for Telemetry data for HKPilot Transceiver Telemetry Radio Set V2 (915Mhz) ? Thanks
Jordan  2 points - 10/29/2014
Can a 4 pin connector be connected to the serial port 1 on the multiwii pro since the gps is on serial port 2 and this work through serial port 1? Can serial ports just be soldered on with pin connectors like here?: ***********ebay****/itm/370879588366
Nezar  11 points - 5/31/2014
Customer Reviews
Create an account
Overall Rating
Like it?
Works perfectly with my APM2.6, exactly what I wanted! It does start to get warm after awhile due to the power regulator, it does need airflow.

No comments. Reply.. here to see all reviews
Aff. Link