Location: UNITED STATES
HobbyKing RC Model HomePage RC Radio Control Help and Support RC Hobby Forum Contact our RC Hobby Support Staff About HobbyKing
RC Model Planes RC Model Cars RC Model Helicopters RC MultiRotor and Quadcopters RC Boats RC Electronics
AIRPLANES AIRPLANE ACCESSORIES POWER SYSTEMS RADIO SYSTEMS
TELEMETRY & FPV
 
 
 
 
 
CARS CAR ACCESSORIES POWER SYSTEMS RADIOS
 
 
BOATS BOAT ACCESSORIES POWER SYSTEMS RADIOS
HELICOPTERS HELI ACCESSORIES POWER SYSTEMS RADIOS
 
 
 
MULTIROTORS ACCESSORIES POWER SYSTEMS RADIOS
ELECTRONICS ELEC. ACCESSORIES
EMAIL  PASS 
TOTAL $0.00 QTY 0
Planes & Parts
Helicopters & Parts
Multi-Rotors & Parts
Cars & Parts
Boats & Parts
Bikes & Parts
Scale R/C Tanks
FPV & Telemetry
Batteries & Accessories
Chargers & Accessories
Electric Motors
Speed Controllers
Robotics & DIY
Servos & Parts
Radios & Receivers
Gas/Glow Engines & parts
UBEC & Regulator
Power Systems
Hardware & accessories.
Tools
Clothing, Gift & Acc.
Sale/Liquidation

Language
Currency
USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > Outrunners by size > Micro & Profile

  RATED:

C2020 Micro brushless Outrunner 3500kv (11g)

C2020 Micro brushless Outrunner 3500kv (11g)
C2020 Micro brushless Outrunner 3500kv (11g)


Specifications.
Diameter: 20.2mm
Length: 20mm
Shaft: 5mm
Weight: 11g (with 10cm wire)
Power: 60W
Kv: 3500rpm/v
Turns: 25
Resistance: 262
Idle Current: .3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly


We do not have a suggested prop size for this little motor yet.
Once we have the data, we will include it within this listing.


PRODUCT ID: C2020/25

Kv (rpm/v) 3500
Weight (g) 11
Max Current (A) 10
Resistance (mh) 262
Max Voltage (V) 15
Power(W) 60
Shaft A (mm) 2
Length B (mm) 14
Diameter C (mm) 20
Can Length D (mm) 6
Total Length E (mm) 23
Update/Add my own data
Customer Data
42g Back warehouse: 0 10+ $9.99
Email Buddy Issue Price War
Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated 4 crowns   
 
Total of 7 discussions.
Royce  1 points - 5/19/2013
 
Any idea what the timing should be?
George  147 points - 3/13/2013
 
PLEASE ADVISE: would this be a good choice for a 250mm quad w/5x3 apc props on 3s?
Eduardo  1 points - 1/7/2013
 
Hi, what is the size of a mounting base for this motor? or the distance from one mounting hole to the other? for to build a mounting base... Thanks!
 Al BigAl 21 points
Distance between centers 21 mm. Isosceles triangle
Danos  16 points - 1/2/2013
 
Can i use these for edf? ALso are they more powerful than C10 Micro brushless outrunner 2900kv? Thanks :)
Firepower  45 points - 4/24/2010
 
Burnt out 2 new ones. I was using a 2 cell LiPo on the first one and they say a 3 cell is all right but mine lasted less than half a second.
Possible problem is the speed controllers I used. They were both new Mag 8 at 12 amp. On the 3 cell I accelerated and it smoked straight away. The esc say you have to set the joystick throw but just got to three quarters, motor cut out and smoke. Never got it set.
Did I get faulty ones? Any ideas?
 Ozzie 10 points
I had 2 fail just after I installed them with the thin wires breaking inside the motor causing it to short and over heat. They are way to fragile you only have to handle them the wrong way and its all over. I didn,t even get to fly my plane and would never bother wasting my money with anymore of these small motors.
 ryen 1 points
****
Fleischpflanzl  76 points - 12/24/2009
 
Can I use the 10amp Turnigy Plush BESC?
 sunshyne 64 points
yes you can :)
 AntonioPT 10 points
with a 10amp Turnigy Plush and a 4040 or 4025 prop? What prop gives more trust?
 scruffy1 36 points
from the reviews i don't think you can trust it at high speed ! :) although it has good thrust...
Carcharadon  21 points - 8/16/2009
 
Anybody out there measure current?
 Impailer 27 points
Ordered one, so will post some data when I get it for you
 Sokonomi 308 points
I came here looking for this aswell. Plenty of thrust measurements but without amps to back it up its pretty pointless. *)
Customer Reviews
Overall Rating
Peter Scheiding
likes
ValueUNRATED
QualityUNRATED
40 thumbs up!
Great little Motor. Runs very smooth and silent. I did some testing:

2s GWS 4025 130g thrust warm
2s GWS 4040 110g thrust, warm
2s GWS 4530 148g thrust, gets some more warm

3s: GWS 4025 220 g thrust, gets a little hot. Should be ok, because when flying amps go down a little
3s GWS 4040 165 g thrust, gets hot quickly
3s: GWS 4530 205g Thrust, gets hot quickly

One point to be careful with: wires are quite fragile, carefully fix them when model is completed and ready to fly in order to prevent damage from vibrations or crash


7 comments. Reply..

Overall Rating
Andreas Fischer
likes
ValueUNRATED
QualityUNRATED
25 thumbs up!
True out-of-box weight as delivered was 12.45g (13pcnt more than indicated).
No-load RPM/V constant matches given manufacturer data quite well. Be aware that this motor is not yout typical indoor aerobatics drive, but better suitable for small and fast outdoor models. Needs appropriate cooling, but otherwise quite an impressive little motor. Props no bigger than 6x3 or 5x5 in 2s Lipos



No comments. Reply..

Overall Rating
darren colburn
likes
ValueUNRATED
QualityUNRATED
7 thumbs up!
Great motor, I used this on a wing with a 5X3 GWS prop on 3-cell. Makes a very fast wing but the motor does get a little warm. Lots of thrust though so I may switch it to a 4X4 should still have plenty of thrust but bring the amps/temp down.
Will buy more.


No comments. Reply..

Overall Rating
Markus Meier Knuchel
likes
ValueUNRATED
QualityUNRATED
5 thumbs up!
Very nice motor. I put this little gem on a 46cm (18.1") toy wing (http://www.freescale.de/html/juniorwing.html). AUW is 94gr (3.3oz). I used a Graupner 3x3 prop, GWS 4x2.5 and bigger hit the overload protection of my TP12A ESC with a 2S 450mAh Lipo.

Greetings Markus


No comments. Reply..

Overall Rating
tournier christian
likes
ValueUNRATED
QualityUNRATED
5 thumbs up!
With 4.5x3 and 3 cells batt (500mAh) my Crobe of 145g start vertically!
I must stop after 3 seconds to keep it visible...
Terrific! Adrenaline during every fly!


No comments. Reply..

.....click here to see all reviews
 
Aff. Link

Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved