Folding Propeller w/ Alloy hub

Item found in the following categories;
> Hardware & accessories. > Propellers > Folding Propeller & Spinner

RATED:


	Folding Propeller w/ Alloy hub - 6x3

Folding Propeller w/ Alloy hub - 6x3
Machined alloy hub.
2~2.3mm Colet style shaft adapter.
Weight: 22g

PRODUCT ID: OR025-00306a

Length (Inch [X])	6
Pitch (Inch [Y])	3

Update/Add my own data
Customer Data

29g

-1

$5.52

Further discounts available for registered & logged-in customers.

STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;

Stock updated frequently.
Goods arrive every 21-60 days.No ETA on 1 item.

Customer rated

412
crowns

Total of 3 discussions.

schorr31

3 points - 7/20/2011

Can i use this proppeler with the 18-11 2000kv Micro Brushless Outrunner (10g)??

aJS32

282 points

Hi. Yes, you can use this prop. Suggested for the motor under question is 7x5. This one is smaller, so no problem to use it. The Amps consumption will be less as well as will be less thrust. Personally, I would not reccomend to use this prop with that motor. Regards.

Mike

219 points -

Please UH confirm the spinner diameter

Mike

219 points

Spinner dia is 32mm. Pity I had to buy one to find out!

Scott

17 points -

What is the spinner diameter?

aJS32

282 points

Bottom diameter of spinner is 31,6mm. Regards

Customer Reviews

Overall Rating		gary francke likes
Value	UNRATED
Quality	UNRATED

13 thumbs up!

A well made collet type folding prop, But for moderate power and rpm. I tried it at 300 watts and 17,500 rpm and it threw a blade. It would help buyers to post limit specs.

No comments. Reply..

Overall Rating		Mike Roberts likes
Value	UNRATED
Quality	UNRATED

7 thumbs up!

Only get this for the very nice hub, same as used on the 8x4.5 - but a few cents cheaper.
The hub Dia is 32mm and it takes blades with 6x2mm hole such as Graupner cam (excellent).
The blades supplied have 5x2mm holes and are fitted without any spacers. This set should not be used in the supplied condition!
Mike

No comments. Reply..

Create an account

Overall Rating		Mimiche 9 likes
Value	UNRATED
Quality	UNRATED

Like it?

Excellente hlice, d'un rendement mon avis au moins quivalent aux Graupner. A signaler qu'elle ne tolre pas une dformation, mme minime, de l'arbre moteur, ranon de sa qualit arodynamique, je pense! En tout cas, trs bel objet et joli cne pour un prix... concurrentiel!

No comments. Reply..

Create an account

Overall Rating		bobnadler 18 likes
Value	UNRATED
Quality	UNRATED

Like it?

This unit has a very nice spinner but is supplied without prop spacers and its collet will not hold a 2mm shaft. It was necessary to add a full length collar of 0.1mm soft aluminum (the extruded body of a soda or beer can is dead soft 0.1mm aluminum)to the shaft to enable the collet to grip a 2mm shaft with sufficient pressure to hold the unit securely (I hope) in place. It's about time that HobbyKing corrected the description of this unit or corrected its very obvious flaws.

No comments. Reply..

Create an account

Overall Rating		Kikesif 55 likes
Value	UNRATED
Quality	UNRATED

Like it?

It works very well. You have to glue the nuts because you can lost them..

No comments. Reply..

.....click here to see all reviews

Folding Propeller w/ Alloy hub - 6x3

Folding Propeller w/ Alloy hub - 6x3Machined alloy hub.2~2.3mm Colet style shaft adapter.Weight: 22g PRODUCT ID: OR025-00306a

Folding Propeller w/ Alloy hub - 6x3
Machined alloy hub.
2~2.3mm Colet style shaft adapter.
Weight: 22g

PRODUCT ID: OR025-00306a