Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> FPV & Telemetry > FPV > Goggles

  RATED:

FatShark Attitude V2 FPV Headset System w/Trinity Head Tracker and CMOS Camera

FatShark Attitude V2 FPV Headset System w/Trinity Head Tracker and CMOS Camera
FatShark Attitude V2 FPV Headset System w/Trinity Head Tracker and CMOS Camera

Attitude, already the best all round FPV headset in the Fat Shark lineup, has been supercharged with the addition of the revolutionary 3-axis Trinity head tracker. The 16bit, 9DFO 3-axis head tracker is nothing short of perfection that binds camera motion to head motion so accurately and smoothly that it creates the most convincing immersive FPV experience available.

The 35 degree FOV display strikes a perfect balance between large screen immersion and compact pixel density clarity. The Attitude V2 sports the same polarized backlight technology used in the gorgeous Dominator display for vibrant colors and has adjustable IPD for dialing in the optic sweet spot.

The Attitude utilizes NexwaveRF technology with high pass filtering to make it impervious to 433Mhz and 2.4Ghz UHF radio interference. The quality extends to the exterior with its sleek ergonomics, rubberized texture shell, tactile motion IPD sliders and secured rubber eye cups, the AttitudeV2 headset looks and feels great from the inside out.

To shorten your journey to FPV Nirvana, the AttitudeV2 bundle includes the high performance 600TVL FPV tuned CMOS camera for RTF out of the box (pan/tilt/roll mount not included).

Kit Includes:
Atttitude V2 headset (with integrated 5G8 RX and Trinity head tracker)
1/3" CMOS 600TVL FPV tuned NTSC/PAL selectable camera
250mW 7ch 5G8 TX
3dBi 5G8 antenna x 2
1m AV cable
Futaba 6p data cable
3.5mm JR data cable
ezUHF MiniDIN data cable
Zipper carry case
Lens cleaner cloth
User manual

Headset Specifications:
Optics: FOV (field of view): 35°diagonal (Image size: 1.3m @ 2m)
Interpupillary (IPD) distance: 59~69mm (adjustable)
Supports optional diopter lens inserts: -2, -4, -6 dpt
Audio: Stereo
User Controls: Channel selection/ head tracker reset
Electrical: Power supply: 7~13V (2S/3S supply)
Power consumption: 350mA
Antenna: 5G8 3dBi dipole (circular polarized compatible)
Display: Full color LCD LED backlit Kopin CyberDisplay 922,000 pixels binocular display (640 X 480 VGA) NTCS/PAL auto selecting
Head Tracker: Trinity 16bit 9DFO 3-axis
Battery: 2S 7.4V 1000mAh (required, not included)
Weight: 150g

Transmitter Specifications:
Power supply: 7~13 V (2S/3S supply)
Power rating: 310mA @7.4V
TX power: 250mW
Antenna: External dipole (circular polarized compatible)
Size: 55x26x11mm
Weight: 22g (w/antenna)

Camera Specifications:
Power supply: 3.5~5V
Power rating: 60mA @5V
Imager: 1/3" CMOS 600TVL, FPV tuned light handling, NTSC/PAL selectable
Lens: 2.8mm IR coated, 100° diagonal FOV (ideal for fixed camera)
Lens extrude: 15x14mm diameter
Size: 21x21x12mm
Weight: 15g

Interface:

3.5mm AV in/out port
3.5mm stereo earphone port
PS/2 DIN head tracker data port

Operating Frequencies:
5740 MHz, 5760 MHz, 5780 MHz, 5800 Mhz 5820 MHz 5840 Mhz 5860 MHz



PRODUCT ID: 253000027-0

This product available from a warehouse near you!

Free Shipping
For a limited time only, this item is being shipped for FREE!


Weight: 711g
Quantity: 
International Warehouse
stock
OK
USA West Warehouse In Transit View Item
Price  $409.00

battery
  • Fatshark FPV - Headset Battery 7.4v 1000mah

    Combo Price: $13.96   BACKORDER

  • Fatshark FPV - Headset Battery 7.4V 1000mah w/Banana Charge Lead

    Combo Price: $17.96   IN STOCK



servo
  • HXT900 9g / 1.6kg / .12sec Micro Servo

    Combo Price: $2.65   IN STOCK



acc.
  • FPV Fiberglass Pan-Tilt Camera Mount

    Combo Price: $3.95   IN STOCK

  • HobbyKing® ™ Bixler® ™ 2 EPO 1500mm w/ Motor, Servos and Optional Flaps (ARF)

    Combo Price: $69.95   IN STOCK

  • HobbyKing E-OSD

    Combo Price: $13.61   IN STOCK

  • Turnigy Talon Hexcopter (V1.0) Carbon Fiber Frame - 625mm

    Combo Price: $77.95   IN STOCK

  • FPV Fiberglass Pan-Tilt Camera Mount L-Size

    Combo Price: $4.95   IN STOCK

  • FatShark DC to 4mm Banana Plug Battery Adapter

    Combo Price: $4.95   BACKORDER

  • Fat Shark 110/240V Universal Battery Charger with EU US and UK Socket Adapters

    Combo Price: $12.96   BACKORDER



Further discounts available for registered & logged-in customers.
 Customer rated
514
crowns
  
 
Total of 121 discussions.
Zoltán  1 points - 3/26/2015
 
Pls restock Eu!!
Matti  1 points - 3/24/2015
 
Please restock EU!
Oak4sale  45 points - 3/2/2015
 
My current setup on this phantom: DJI Phantom v1.1.1. 2 Lumenier 2250mAh 3s 35c Lipo Battery. (Two battery setup) 2 Carbon Fiber Battery Mounts. Zenmuse H3-2D gimbal. (inverted mount for extra clearance) GoPro HERO3 HD Black. Phantom upgrade MC board for Zenmuse H3-2D. DJI Vision 2 blades. Aftermarket extended & wider landing gear. ImmersionRC 5.8Ghz Audio/Video Transmitter 600mw. Fatshark Attitude SD FPV Goggles with 5.8 Receiver. ImmersionRC 5.8 GHz SpiroNET Antenna Set RHCP (SMA Connectors). Also running a ground station for spectators to see a realtime view of my flights. Additionally, this setup can be used as a FPV monitor system if you prefer over using goggles. My personal preference is the Fatshark goggles. Ground station setup: Digital Prism ATSC-710 7" Battery Powered LCD Monitor. ImmersionRC Uno 5.8GHz NexWave 32ch A/V Reeiver v4. 5400mAh 3s Lipo for power to receiver and monitor. (2200 would work fine) ImmersionRC 5.8 GHz SpiroNET Antenna Set RHCP (SMA Connectors).
Oak4sale  45 points - 2/28/2015
 
Love mine!
 propeye 12 points
Seriously Oak4sale, you should stop spamming every forum with the same videos claiming to be using that product to get people to watch them. I could see part of your model & it didn't even look hobby grade to use Fatsharks & you claimed it was a Phantom on another forum. I've seen a lot of other people have asked you to stop doing this. Hobbyking should ban you from posting you're videos.
 Eurny666 117 points
1 Andrew, that's the worst way to develop a Youtube channel...
 propeye 12 points
It's not my YouTube channel, I'm asking this Oak idiot to stop posting. Read it properly man
 Eurny666 117 points
I do know that's Oak4sale's youtube Channel and I agree with you that he must stop spamming. I had written "plus 1" to say that I completely agree with you but the "plus" was automatically removed by Hobbyking.com and thus completely changed what I meant...
 propeye 12 points
All good then mate, I would hate for other rc enthusiasts to think it was my YouTube post as these spam vids **** me to tears!!
propeye  12 points - 2/25/2015
 
I have recently bought these goggles & 2 green lines have appeared in the lenses. Usually I fly at an oval so I can't really see them when I'm fpv flying my zmr quad. But if I aim the camera at a white wall or grey sky they are very noticeable. If I adjust the contrast very dark or light they mostly disappear. Has anybody else had this problem? I have used them less than 20 times & hoping the problem is camera or transmitter related as I don't want to have to go through the hobbyking warranty process ever again.
 Rcflyyer1 122 points
That's weird. Do you have the eye-point sliders adjusted properly? The only other things that could cause that is if debris found its way inside the goggles, if sunlight got into the lenses or if it was dropped. Try hooking it up to your TV with the included AV cable and see if the problem persists. Also, Fatshark has a support forum on FPVLab and will help you regardless of where you purchased the goggles. If you post there, you can arrange for them to repair your goggles or they may have a simple suggestion on how to fix it.
BEST ANSWER CREDIT AWARDED
 propeye 12 points
Thanks for the tips, I will try doing that.
 propeye 12 points
I have connected it to my LCD tv & the vertical lines are gone. This is indeed weird, I havent exposed the lenses to sunlight, or dropped them & I can only assume there is no dirt inside,they are still only a month old & always use the case provided. I appreciate the advice you have given me & will follow it up, cheers
 Rcflyyer1 122 points
No problem! It's good to hear that the vertical lines have disappeared! The problem can be narrowed down to your camera & video transmitter setup. If you are using the included camera & video transmitter, you can still get help from FPVLab from Fatshark. Thanks for the credit too!
 propeye 12 points
I mean the vertical lines are not on my tv ,so there's a problem with the headset as the lines are still very visible. That means the problem isn't with my camera & video set up, it's definitely with the headset. They have to be returned to Hobbyking first as FPVlab states they can't help unless that process is followed first.
Customer Reviews
Create an account
Overall Rating

4 likes
Value
Quality
Like it?
Awesome Headset! fits my head and eyes nicely. a must buy for fpv


No comments. Reply..

Overall Rating
ChrisG
72 likes
Value
Quality
Like it?
This FPV was more expensive than the Predator V2, but I figured the bigger FOV and included head tracker were worth the extra $130. Very light unit, bright display and IPD is useful. The included antennas are garbage so buy the circular pair. The camera is good enough for a CMOS type, but I have ordered a CCD which will blow away any CMOS for contrast, HDR and low light. Maybe it's just me, but the eye cups are uncomfortable and feel like I've been punched in both eyes after wearing them for too long. Like others I've bought ski googles and installed them in snuggly which is super comfortable now. Overall I'm happy with these, but lost 1 star for the sub-par included antennas and uncomfortable eye cups.


4 comments. Reply..

Create an account
Overall Rating
abu_sadiq
56 likes
Value
Quality
Like it?
I changed out to Attitudes after selling my Dominators and they are noticeably wider in the FOV. The kit is good as it comes complete but was a bit disappointed as there was no battery included or battery plug, unlike with the Dominators, it doesn't include the battery but you get the barrel connector to solder to your own battery pack. I am stuck using the cable and powering the goggles off my transmitter for now which is annoying. Other than that they are great, good finish and quality display. Thanks Hobbyking


No comments. Reply..

Create an account
Overall Rating
diaconom
13 likes
Value
Quality
Like it?
Excellent Product 5 Stars for sure for this.


No comments. Reply..

Overall Rating
James T Kirk
59 likes
Value
Quality
Like it?
Brilliant I have just received these today (already had predator v2) arrived in UK in 10 days (uk direct post) Free ! No customs problems. If you have the Predator v2 and are wondering if its worth upgrading YES IT IS ! these are brighter/larger picture and being able to adjust the PD is brilliant ...I do a lot of fpv flying on my quads, I don't use the head tracker, but its nice to have the option now ...yes as others have said the eye cups are a bit uncomfortable ... but I would say the same for all the goggles I have tried ... but when flying I don't notice it, as am totally immersed in the flying, and its only 15 mins at a time ... 450 (naza) quad with zippy 5000 3s 20 c (using 9xr), the included antenna are ok, but clover lead are so much better ... I only go about 1.5k but have no problems with reception ...I am very happy with these ... well worth the money ...


No comments. Reply..

.....click here to see all reviews
Aff. Link