Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Multi-Rotors, Drones & Parts > Frame Kits


F330 Glass Fiber Mini Quadcopter Frame 330mm (UK Warehouse)

F330 Glass Fiber Mini Quadcopter Frame 330mm (UK Warehouse)
F330 Glass Fiber Mini Quadcopter Frame 330mm (UK Warehouse)

The F330 is a well thought out 330mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon.

Assembly is a breeze with pre-threaded brass sleeves for all of the frame bolts, so no lock-nuts are required. It utilizes one size of bolt for the entire build, making the hardware very easy to keep in order and only requiring one size of hex wrench to assemble.

A great feature of this frame is the large mounting tabs at the front and rear of the main frame bottom plate for mounting cameras or other accessories. This makes for a great way to take aerial video or fly FPV without the need to add any additional mounting brackets.

The F330 also features colored arms (2 white and 2 red) which are great for orientation. It helps to keep you flying the right direction without the need for different colored props. 

We offer a full line of multi-rotor electronics such as multi-rotor control board, ESC & motors. It has never been easier or more affordable to get a quad in the air!

• Built from quality glass fiber and polyamide nylon
• Pre-threaded brass sleeves for all of the frame bolts
• Colored arms for orientation to keep you flying in the right direction
• Large mounting tabs on main frame bottom plate for easy camera mounting
• Easy assembly

Width: 330mm
Height: 48mm
Weight: 147g (w/out electronics)
Motor Mount Bolt Holes: 16/19mm

4 x 28mm 1000~1200kv (or similar size/kv)
4 x 12~20 Amp ESC
4 x 7x5~8x4 Prop (2CW & 2CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 1000~1800mAh 3s 11.1v Lipoly battery

PRODUCT ID: 260000006

Shipped from:
UK Warehouse



  • HobbyKing KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer (UK Warehouse)

    Combo Price: $24.95   IN STOCK
    Add to Cart

Further discounts available for registered & logged-in customers.

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
Total of 2 discussions.
Mark  1 points - 5/2/2016
I know for the price it's probably not worth it but can you buy spare arms for this frame. Came down a little hard on landing and broke off 1 of the feet so it doesn't sit level on the ground :/ MY SETUP F330 Frame APM 2.8 FC A2212/10T 1400kv motors 6x4.5 props EMAX 30A Simon K ESC's 6M GPS with built in compass 3DR 433Mhz Telemetry kit Flysky FS-6i TX & FS-iA6 RX 3s 2200mAh Battery
 simplyG 526 points
Hi, M. First as you said, for the price buy a new frame. Second, just a suggestion, for your motors, I would consider 7x5 or even 8x4 props. Your esc's are also an overkill, maybe 20amp will be ok. I have 2 of these bad boys woth my oldest apm and a multiwii pro and I love them. Happy flyong
tsangbou  260 points - 11/25/2013
This little quad is impressive for the money!...
 Nornironguy 22 points
Very nice flying. I'm building a 450 size and I hope it flys as well as yours. Well done!!!
 Mark 1 points
Norn Iron Guy did you ever get the 450 built?? Where about's in Norn Iron are you, I'm up the North West coast!
Customer Reviews
Overall Rating
Like it?
330 frame is really good for someone new to multirotors. Warning though due to the size its very nimble and fast. Make sure you know how to program the flight controller to make it docile until you have an idea on how to fly. Other option is to set the transmitter up so the sticks are less responsive. Good thins about a small quad is its cheaper on batteries and you can get good flight times. I used mine with a 2200 3s and it was silly fast.

No comments. Reply..

Create an account
Overall Rating
Capt. Peter
Like it?
This is a decent frame for the price. Really easy to put together! Although it's not as stiff as i'd like it flys really will with 2730/1500KV motors and 12a Plush escs with a 3S 1550 Lipo AND a FPV setup. So it handles the weight ok! My quad with a kk 2.0 on stock settings feels so dozy and perfect for FPV! 4 stars as if the arms could be more rigid! :)

No comments. Reply..

Create an account
Overall Rating

Like it?
Works well it's a copy of a DJI.
No Power though PCB unlike the 450. So you will need a HK Power Board.

No comments. Reply..

Create an account
Overall Rating
Like it?
Small, cheap, but quote rigid frame! I like the simplicity of it. Easy assembly, takes little space when you travel.

No comments. Reply..

Overall Rating
Like it?
Good quality parts on this if a little heavy but with the setup i'm running i don't have a problem in that way. setup is KK2.1.5 3s 2200, D2822/17 1100kv, 8x4.5 props, HobbyWing X-Rotor 20A OPTO ESC. its off the ground before 50pcnt throttle. would be nice if it had a 3rd deck on top though.

No comments. Reply.. here to see all reviews
Aff. Link