USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
I have order HXT 9311BB 11.6g / 1.3kg / .10sec Precision Servo but received SSV-9311BB 12g / .40 oz / .12sec. Will it be fast as HXT 9311BB? As we know the tail needs high speed servo to archeive good performance.
All these cheap servo's are no good for use on tail. If it fails on you (and eventually it will for that price, I had several) it will cost you much more than a servo alone. Spent more on your servo's (at least for heli's and airplanes).
No I wouldn't advice this servo for such a critical use at all.
Customer Reviews
Overall Rating
Randall Everly
likes
Value
UNRATED
Quality
UNRATED
32 thumbs up!
Decent... but has problems centering. I use them as aileron servos on a cularis electric glider. They work ok and the glider flies fine. However I do have very minor problems keeping the wings level in flight. On the ground, you can tell this problem is due to the fact that the ailerons return to distinctly different positions depending on which way the servo moved previously. The good news is they are consistent as far as the two positions they return to, but unfortunately they are not the same position. I tired to increase the throws on the ailerons and this only magnified the problem and I had to go back to the shorter throws.
No comments. Reply..
Overall Rating
eemla
likes
Value
UNRATED
Quality
UNRATED
16 thumbs up!
I've put this servo in a T-Rex XL for the Tail rotor. The speed (0.10sec) is very correct the gyro respond and the T-Rex keep its trajectory. The power (1.3Kg) is enough for this helico. The 3 other servos are the HXT900 9g 1.6kg 0.12sec. The set is a good choice
No comments. Reply..
Overall Rating
Mart Seger
likes
Value
UNRATED
Quality
UNRATED
12 thumbs up!
Very precise,quiet and strong servo. Used in 1.4m f3a model for eleron servos (2pc). Totally satisfied!
No comments. Reply..
Overall Rating
Brian
likes
Value
UNRATED
Quality
UNRATED
12 thumbs up!
I bought two of these servos for use in an Associated RC18R. The performance is better than the stock servo at half the price, but the stock servo saver does not fit so be prepared to get creative! I ran without a servo saver and ended up breaking a gear. Not the servo's fault for sure.
No comments. Reply..
Overall Rating
Michael Chowaniec
likes
Value
UNRATED
Quality
UNRATED
10 thumbs up!
Good quality servo, fast, quiet and strong. Can´t tell something about precision in the moment, but no jitter in neutral position. Some larger arms could be added, but nevertheless 5 Stars
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
