Please confirm your location:



USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Speed Controllers > All Speed Controllers
> Speed Controllers > HobbyKing ESC
> Speed Controllers > Car ESC

  RATED:

HobbyKing X-Car 45A Brushed Car ESC

HobbyKing X-Car 45A Brushed Car ESC
HobbyKing X-Car 45A Brushed Car ESC

This 45A brushed ESC is a great replacement for your model's stock ESC or for setting up a new brushed power system in your car or truck. It features a low voltage cut-off for use with lipoly batteries. Its compact and lightweight design make it ideal for use in 1/10 scale drift cars utilizing brushed motors.

Features:
• Low voltage cutoff for use with Lipoly batteries
• Compact and lightweight design
• 5.6V/2A BEC

Specs:
Continuous Current: 45A
Burst Current: 320A (10sec)
Suitable Car: 1/10 on and off road
Battery: 2 cell Lipo (5-6 cells NI-xx)
BEC output: 5.6V/2A switch mode built-in
Motor type: brushed
Operation: Forward/Brake/Reverse
Dimension: 38x28x22mm
Weight: 40g



PRODUCT ID: 9261000018

This product available from a warehouse near you!


Weight: 55g
Quantity: 
International Warehouse
stock
10+
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price  $10.45

acc.
  • Nylon XT60 Connectors Male/Female (5 pairs) GENUINE

    Combo Price: $3.75   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated
528
crowns
  
 
Total of 233 discussions.
Usernamejames  3 points - 1/27/2015
 
What is the turn limit on this esc?
ANGEL  1 points - 1/26/2015
 
I have a question. Will it withstand voltage of a fully charged battery because it will exceed 7.2V ??? . And the second question, is there a possibility to adjustment of the Cut-Off voltage ,cos 2.8V per cell is too small for me !?? Thanks
 meeki 952 points
Yes it will handle a fully charged 6 cell Nicad/NiMH or a 2 cell lipo. You can only turn the LVC on or off, there is to way to adjust the cutoff voltage.
BEST ANSWER CREDIT AWARDED
madnzer  1 points - 1/23/2015
 
Hi meeki thanks for your answer it helpso alot. Looks like I'm going to get a 7.2 2000mah, however I will Need to get a new charger for it. What would you recommend form here that will charge in about 15 minutes like the old ones.
 meeki 952 points
In order to charge a 2000mah battery in 15min you would need a charger with a 8amp charge rate, not many chargers here can do that and a 4c charge rate is a bit harsh on batteries. Did you have a charger that turned off when the battery was charged or did you just have some resistive leads that you connected to a car battery?. I dont own any chargers sold here so I cant vouch for any of them, but the Turnigy Accucel-6 50w Balance Charger seems to get good reviews, is cheap and is often recommended by people, it is also capable of charging a 2000mah in about 20 minutes, that is if it doesn't have a safety feature preventing you from charging a battery too quickly. Do you want a charger that runs from 12v or connects to AC?, a 12v charger will be cheaper but the AC charger most likely will run from either AC or a 12v "or more" power source. It all depends on how much you want to spend.
BEST ANSWER CREDIT AWARDED
madnzer  1 points - 1/22/2015
 
Thanks for the answer. The moter the i have is a rx-50 2 technI gold the speed control is mc112b.I'm all so trying to find so batterys as well as they are 20 years old that are hard to find. I have a 7.2 1200mah, but the only ones I can fin are 2000mah.I'm trying to get it going for my daughter so I have a lot to learn. thank you meeki glen
 meeki 952 points
If you mean the RX-540 VZ Technigold then it wont be a problem for sure, especially if you plan on using NiCads or NiMH batteries. NiMH are sold here on HK, but if you are using an old charger you will have to make sure that your charger is able to charge NiMH batteries. A NiMH battery will overcharge if charged with a NiCad charger.
madnzer  1 points - 1/22/2015
 
I'm wondering if anyone can help me. I have a futaba 112b that has burnt-out and I'm wondering if this esc could replace it. I haven't use my rc car for 20 years about and the technology has changed. I'm using a 7.2 1200mah battery if this helps
 meeki 952 points
It should be fine, the 112 was mainly for stock and very mild modified motors. What motor do you have?. You may also want to check that your battery is still good.
BEST ANSWER CREDIT AWARDED
Customer Reviews
Create an account
Overall Rating

44 likes
Value
Quality
Like it?
this esc will be used Rock Crawling..No Natural Brake.
reverse or forward is accessible at any time after the RPM


8 comments. Reply..

Overall Rating
mark
8 likes
Value
Quality
Like it?
Ok i took the plunge and bought six of these esc's to replace some others i had, all setup in various tamiya cars and buggies, i use lipo batteries so having the built in cut-off was a big selling point to me and at such a great price i would recommend them to anyone, easy to program. Ive been buying more and more from hobbyking, always great products and excellent prices. Keep them coming guys.


No comments. Reply..

Create an account
Overall Rating

33 likes
Value
Quality
Like it?
Ottimo regolatore, finalemnte anche regolatori per motori a spazzole.
Valerio Roma Italia


No comments. Reply..

Create an account
Overall Rating

3 likes
Value
Quality
Like it?
Install it in my old Tamiya Wild dagger truck with 2 x 540 brushed motors, and i works like a charmed, just out of the "box". The old school speed control went up in smoke. :-)

Best regards

Per


2 comments. Reply..

Create an account
Overall Rating
RCSKY
2 likes
Value
Quality
Like it?
forward and reverse is good.
Also `stop, is certainty.


No comments. Reply..

.....click here to see all reviews
Aff. Link