Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Electric Motors > Outrunners by size > Micro (Below 22mm)
> Electric Motors > Outrunners by size > Specialised Motors
> Electric Motors > Outrunners by size > 22 to 27mm

  RATED:

Micro 3D Single Axis Thrust Vectoring Motor Mount Kit Inc. 2204 Brushless Outrunner

Micro 3D Single Axis Thrust Vectoring Motor Mount Kit Inc. 2204 Brushless Outrunner
Micro 3D Single Axis Thrust Vectoring Motor Mount Kit Inc. 2204 Brushless Outrunner

 

Looking for something REALLY different for your 3D foamie?

Check out our single axis thrust vectoring motor mount for small outrunners! It can be set up to augment yaw when mounted horizontally or pitch when mounted vertically.

The mount is simply fitted between the firewall and the motor, supplied with the mount are the pull-pull cables and extended servo arm.

This kit includes a 2204-1700Kv brushless outrunner and o-ring style prop adapter.

Installation is very straightforward!

Mount Spec:
Motor to mount hole spacing: 32mm diagonal
Firewall hole spacing: 32mm diagonal
Standoff from firewall: 16.5mm 
Weight: 3.1g

Motor Spec:  
RPM/v: 1700kv
Dimensions: 28 x 13mm
Shaft: 3.0mm 
Voltage: 7.4v~11.1v
Weight: 18g
No-load current: 1.0A @ 11.1v
Max Current: 8A
Max Watts: 80W
Mounting Holes: 32mm

 

 



PRODUCT ID: 9095000019


Weight: 69g Quantity: 
International Warehouse
stock
9
Price $19.97

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
54
crowns
  
 
Total of 9 discussions.
Anthony  57 points - 11/15/2013
 
because some motors are designed to handle 2 cells, and other motors are designed to handle 2 or 3 cells or even more. I burnt one of these motors out on a 3 cell. I thought it was just bad luck, so used my second one (i bought 3 of these) and that quickly burnt out too. I have claimed my money back before on a different motor, and it is just not worth all t e hassle of having to upload pictures and a video, then send it off for testing, bla bla bla. So i wasted 2 very good motors through bad advertising!
 Miguel 7 points
Anthony, Do you own a watt meter? (i guess not) If so what amp draw did you get and what prop did you use on this motor with the 3s lipo?
 gsnflyt 128 points
Anthony, You burned up your two motors because your prop or pitch was too much for a 3 cell. For example , if you are using a 2 cell pack and an 8x6 prop it might pull 8 amps at full power but if you decided to use a 3 cell pack with the same prop you will go over the 8 amp limit for what this motor is rated therefore burning it up. So you will either need to reduce the pitch (8x6 to 8x4) or go with a smaller diameter prop (8x6 to 7x6). As Miguel mentioned you must have a watt meter to know what amps you are drawing that way you can know what size prop and battery will work best for the most power without burning the motor up. You might be able to get away with more cells with the biggest prop with out burning up the motor but that usually means because you limit full power to 2-5 second burst here or there to bail you out of trouble when you need it.
Anthony  57 points - 9/22/2013
 
This doesn't work on 3 ceells
 Michael 9 points
why not
Donna  2 points - 4/14/2013
 
how to attach propellor to brushless motor. Clueless homeschool mom trying to help son build a RC plane and hopefully learn something new
 simplyG 394 points
Hi, Donna. With this motor its very easy. As you can see on picture 3, there are two little black bolts on top of the motor. Just put the propeller on top and run a rubber ring across the two bolts. Happy flying.
skydvejam  27 points - 1/3/2013
 
I was thinking of mounting this to a small flying wing sideways to have some "rudder" control.
 acicuecalo 57 points
Possibly it doesn't works well on a flying wing maybe due to the lack of rudders: youtube Hz1dFsYwkL8
wildthawn  299 points - 12/28/2012
 
sell this w/o motor
Customer Reviews
Create an account
Overall Rating
sylvainfz6
239 likes
Value
Quality
Like it?
pas encore essayer mais prometeur


1 comment. Reply..

Overall Rating
andro345
10 likes
Value
Quality
Like it?
witam!silniczek i akcesoria zapakowane perfekcyjnie!sam silnik wygląda rewelacyjnie,jest identyczny jak TIGER MOTOR AS 2204.pracuje ładnie i bardzo cicho,łożyska bez luzów.waga samego silnika to 18,79g.świetny zestaw,polecam!


No comments. Reply..

Create an account
Overall Rating
Mubark
150 likes
Value
Quality
Like it?
witam!silniczek i akcesoria zapakowane perfekcyjnie!sam silnik wyglada rewelacyjnie,jest identyczny jak TIGER MOTOR AS 2204.pracuje ladnie i bardzo cicho,lozyska bez luzów.waga samego silnika to 18,79g.swietny zestaw,polecam!


No comments. Reply..

Create an account
Overall Rating

1 likes
Value
Quality
Like it?
Es muy bueno para los que tienen un foamy que quieren tener el control totald e este. Con el vectorial gira en el lugar jeje... RECOMENDABLE


No comments. Reply..

.....click here to see all reviews
Aff. Link