Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Radios & Receivers > Turnigy

  RATED:

Turnigy 9XR Transmitter Mode 1 (No Module)

Turnigy 9XR Transmitter Mode 1 (No Module)
Turnigy 9XR Transmitter Mode 1 (No Module)

The greatly anticipated Turnigy 9XR has arrived!

The software for the 9XR first began development 6 years ago. Since then it has been tweaked, tuned, changed, updated and revamped by members of the R/C community into a powerful - yet easy to use interface. Our engineers designed the physical product around the R/C communities software changes and input. The culmination of all these is the Turnigy 9XR!

For many users this will be the perfect 9 channel radio straight out of the box, but there are many tinkerers out there who love modifying and pushing the boundaries of what is possible from their radio.
We have factory fitted the 9XR with an AVR ISP header to simplify the development of custom software, we have launched turnigy9xr.com as the epicentre for software developers and additional community support for all 9XR users......With the 9XR we encourage it!

The 9XR is supplied preloaded with top quality software which is full of features and yet remains easy to use.
Our aim was to develop a radio for you, the hobbyist, with an extensive list of standard features usually expected from a radio system 3 times the price. Our Turnigy 9XR is everything you imagined and more! 

9XR Standard Features:
• 8 Channel PPM/9 Channel PCM
• Full Ball Bearing gimbals
• Adjustable Stick Length
• Digital Trims on all Primary Axis
• 16 Model Memory
• Assignable Switches
• Freely Assignable Channel Mixes
• Graphical Dual Rate and Exponential
• Sub Trim and Travel Adjust
• Flaps and Differential
• Throttle Hold
• Supports Heli/ Aero/ Glider Model Types
• Programming Templates Based on Model Type
• Supports M1, M2, M3, M4 stick modes
• 128 x 64 backlit Liquid Crystal Display
• Built in JR & Futaba Trainer Ports
• PPM & PCM Output
• JR Form Factor RF Modules (Orx Dsm2, Orx Open LRS 433Mhz etc)
• Programmable Timers
• Low Voltage Warning and Buzzer
• Supports 3s Lipo (Required)
• 9XR Firmware Pre-loaded 
• AVR ISP Interface
• Internal 2.4GHz Antenna


Online support and user forums available at: www.turnigy9xr.com

Spec:
Channnel: 8ch ppm/9ch pcm
Display: 128*64LCD (Backlit)
Support Type: Heli/Acro/Glid
Model Memory: 16
Stick modes: 1, 2, 3, 4
Encoder type: ppm/pcm
Module Interface: JR Compatible (See Related Items Below)
Simulator Interface: Yes (JR & Futaba)
Buzzer: Yes
Battery Compartment: 112 x 44 x 27mm
Weight (less battery & Rf Module): 723g 


Required:
Battery 3S Lipo
RF Module

Included:
Turnigy 9XR Transmitter (Mode 1 – Throttle on Right Stick)
Quick Start guide

Note: This version is supplied without an RF Module, Please order the relevent RF module from the accessories list below.



PRODUCT ID: 9171000154

This product available from a warehouse near you!


Weight: 1280g
Quantity: 
International Warehouse
stock
10+
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price $50.22

acc.
  • Switch Set (Right) - Turnigy 9XR Transmitter

    Combo Price: $6.21   IN STOCK

  • Main Board with Charging Port - Turnigy 9XR Transmitter

    Combo Price: $6.21   IN STOCK

  • Trainer Port/RF PCB Assembly - Turnigy 9XR Transmitter

    Combo Price: $5.96   IN STOCK

  • Transmitter Gimbal Set (Right) - Turnigy 9XR Transmitter Mode 1

    Combo Price: $4.39   IN STOCK

  • Transmitter Gimbal Set (Right) - Turnigy 9XR Transmitter Mode 2

    Combo Price: $4.42   BACKORDER

  • Transmitter Gimbal Set (Left) - Turnigy 9XR Transmitter Mode 1

    Combo Price: $4.25   IN STOCK

  • Turnigy 9XR Transmitter Custom Faceplate - Chrome

    Combo Price: $3.95   IN STOCK

  • Switches - Turnigy 9XR Transmitter (3pcs)

    Combo Price: $3.08   IN STOCK

  • Turnigy 9XR Aluminum Carrying Case

    Combo Price: $12.96   IN STOCK

  • Turnigy 9XR Transmitter Stand

    Combo Price: $5.35   IN STOCK

  • Turnigy 9XR FPV Monitor Mounting Arm

    Combo Price: $7.53   IN STOCK

  • 9XR Radio Tray With Balance Strap (polycarbonate)

    Combo Price: $22.21   IN STOCK

  • Switch Set (Left) - Turnigy 9XR Transmitter

    Combo Price: $6.15   IN STOCK

  • Potentiameter (Round Pot) - Turnigy 9XR Transmitter (3set)

    Combo Price: $1.56   IN STOCK

  • Trims Tab - Turnigy 9XR Transmitter (4set)

    Combo Price: $1.51   IN STOCK

  • Alloy Anti-Slip TX Control Sticks Short (Futaba TX Blue)

    Combo Price: $1.85   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated
557
crowns
  
 
Total of 453 discussions.
Dan  1 points - 10/22/2014
 
I seem to be unable to bind my 9XR to the V8FR-II receiver. The manual says to switch the transmitter to PPM mode. How is that being done? I would be grateful if someone can describe the binding procedure fro me. Regards Dan
 Davide 7 points
It is possible. I would use it but you have to be very careful, you have to open the TX and remove the antenna, open rx module and disconnect wire antenna. You need to create a support for the antenna and secure it on the cover of rx so that the antenna is attached to the module rx like those you find on Hobbiking.
 Davide 7 points
I'm sorry, I was wrong
Ferdinand  9 points - 10/19/2014
 
I have a turnigy 9x transmitter with module RF9x v2 module, the transmitter broke, if I buy this transmitter (9XR) can I use my RF9x v2 module in it?
 Davide 7 points
It is possible. I would use it but you have to be very careful, you have to open the TX and remove the antenna, open rx module and disconnect wire antenna. You need to create a support for the antenna and secure it on the cover of rx so that the antenna is attached to the module rx like those you find on Hobbiking. target=_blank>frsky
 Davide 7 points
 Ferdinand 9 points
Thanks for your reply! I have 4 receivers Turnigy 9X 2.4GHz 8Ch (V2) and 4 Hobby King 2.4Ghz 6Ch V2 receivers, they are (only) compatible with the RF9x v2 module, that is why I want to use this same module. I upgraded my 9x with a backlight myself and that is when the trouble started, it worked for a few weeks, but then smoke came out…* If I upgrade to this new transmitter I have to open it again…* a more plug and play module is maybe a better idea for me, but is it available and what receivers do I need then? Another option could be, I order again the 9x transmitter with module and receiver for about $50. But it is out of stock…* Now I use my old Multiplex Cockpit MM 40mhz FM transmitter with a corona RP8D1 receiver…*
peteriwas  1 points - 10/17/2014
 
Guys, I must be look right at it and not seeing it, what's the battery this transmitter needs?
 kwalq 7 points
Something 3s (11,1V). You can take "original" - www.link
Davide  7 points - 9/19/2014
 
Hello, I purchased this radio and I do not know which module to take, I need a receiver that supports 2s lipo and I have to use on boats with internal combustion engine
 lorenzo 88 points
frsky djt
 resonator 6 points
Hi Davide, The best module you can take in your case is an OrangeTx 2.4Ghz. It is cheap but yet quality made. In addition to that, if you're techy, it is open source... Regards, Nicolas
 kwalq 7 points
Take FrSky DJT 2.4Ghz Combo Pack for JR but i don't know is it support 2s
gerald  1 points - 9/19/2014
 
I'm old and not used to these modular systems, so could you simply tell me what all I need to buy to make the 9xr fly my plane or operate my tank.Please just list everything,(assume I have nothing),give me the prices, plus shipping to Jackson,Mississippi,USA. Start with the transmitter,and go from there.I don't need all the bells and whistles,just the basics.Thank You, Jerry Trudeau
 Kalos 380 points
You Will need this radio (or the mode 2 version of this radio) You will need a battery for this radio, just look at the accessories tab and its a 3s 2200 lipo. You will need a charger for this battery You will need a Transmitter module for this radio and a receiver module for the boat / plane / tank etc. Just search " JR-COMBO " ... If you dont want to keep moving the receiver then buy another receiver from Frsky... Radio 50$ Battery $15 Module TX and RX $40
Customer Reviews
Overall Rating
bmsweb
57 likes
Value
Quality
Like it?
Only got my hands on one yesterday and I must say I really do like it. There as some little tweaks I would love to have seen made, but that's no biggy in any way at all. As far as value for money goes, this is probably the Best Deal on HK at the moment! REALLY LOVE this radio. Will be buying a second one for my son. I've done a quick unboxing on my YT channel bmsweb GREAT WORK HK! Easy 5 Crowns in all areas watch?v=ynYqmmwP7Ew


1 comment. Reply..

Overall Rating
sparkx
47 likes
Value
Quality
Like it?
I`ve had the 9XR for a week and initially the programming was very difficult compared to the 9X, but after a couple of hours it started making sense. Really like how you can calibrate the voltage display. Don`t like the carry handle/antenna, and miss not having a normal handle to attach a TX stand. I suspect there will be an optional tx stand soon as there are some holes for one. When using a FRSKY module there is no clearance for antenna with a bigger nut, such as a 5 db antenna. See the photo in the files section. It will require some cutting of the case to make one fit. Poor case design. Although flysky module fits fine. Overall great value for money.


No comments. Reply..

Overall Rating
joe
20 likes
Value
Quality
Like it?
what a disapointment the software on this radio lacks flexability for use as a 8 independant channel radio for robotics totaly useless the old V2 software was great for multi channel setups where independant channels are needed as for the radio itself the internal antena is causing problems bleading of signal when an external antena is used what a joke you cannot mix to antenas in one radio fix it


8 comments. Reply..

Create an account
Overall Rating
microquad
26 likes
Value
Quality
Like it?
superbe radio, les manches sont plus "precis" que la 9x, les potards ont l'air plus costaud dommage qu'il n'y a pas de deuxieme trois positions mais bon. le module frsky DJT fonctionne tres bien avec. j'ai quand meme deux petits reproche quand meme:

1)la prise batterie mal placee.
2)manque une prise balance au niveau de la prise de charge.

sinon rien a redire, pas besoin de l'ouvrir pour la reprogrammee ou installe un retro eclairage... enfin pour l'instant.


2 comments. Reply..

Create an account
Overall Rating
skyfox60
1067 likes
Value
Quality
Like it?
Yeah, its there. looks great, despite of some not so important moldig failures. Now the switches that are beneeth the trimms and the cross are to weak, and activated to fast. They should use some with more mechanical resitance that make a better feeling. So as it is now, you should carefully look to what happens if you by ex. press down on the cross, you sometimes activate the left or right switch instead. A bit tricky. In the forum they reported this aso and gave an example of better switsches you can buy and exchange if you want. Despit this I have to say it a great machine for that money. Now, I hope HK reads this...Using much better switches, what gives a much more worthy feeling would the costs increase by about 10$. I am sure that all the people that bought this TX would love to have paid 10$ more for that really added Value not only in the look and feel, but also in daily usage. That radio is, looked to the functions so good that you should not risk making it worse by bad mechanical parts like the weak switches. Exactly these little somethings are the reason, why people believe in Futaba and JR, because of the feeling when having the radio in hand playing around with it. It is not really the higher worthy standard that only an expert can evaluate, it is the worthy feeling that convinces the people to have the right thing. And even for 10 or 20 bucks more this radio has the power to become the radio of the decade.


No comments. Reply..

.....click here to see all reviews
Aff. Link