Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Robotics & DIY > Arduino
> FPV & Telemetry > FPV > Video Tx/Rx > 2.4GHz

  RATED:

2.4Ghz AV FPV Receiver (Arduino Compatible)

2.4Ghz AV FPV Receiver (Arduino Compatible)
2.4Ghz AV FPV Receiver (Arduino Compatible)

This module is a 2.4Ghz band micro-power radio communications receiver, generally used to transfer audio and / or video in Arduino applications.

Designed around a low-power integrated VCO, PLL and a broadband FM video demodulator using a FM sound carrier frequency. This module complies with CE - FCC leakage requirements.

The applications for this module are vast and only limited by your imagination. This unit can also be used as a great low cost 2.4ghz Micro FPV solution.


Features:
2.4Ghz wideband FM A/V receiver
Small footprint

Specs:
Low power consumption: 110mA
Operating voltage: 3.7-5v
Receiver Sensitivity: -90dBm

Channels: 2414, 2432, 2450, 2468
Dimensions: 36 x 23.5 x 6mm



PRODUCT ID: 381000020


Weight: 12g
Quantity: 
International Warehouse
stock
0
Price $14.95

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
Stock usually arrives every 10-25 days.
 Customer rated
56
crowns
  
 
Total of 20 discussions.
hany  12 points - 1/30/2014
 
Can someone tell me how to change default channel frequencies? I have an usbasp programmer and I think I need receiver firmware source code or a tool to configure it through the spi interface. Is there anyone who can help me?
progettoaladino  140 points - 10/22/2013
 
If I could figure out the connection of the various pieces I'd buy it.
progettoaladino  140 points - 10/21/2013
 
as it is connected to the monitor?, you need to plug some particular? someone can send me a detailed diagram of how you abina tarsmettitore monitor, receiver and battery room? Thank you.
David  17 points - 7/25/2013
 
this can be used with following transmitter This 2.4Ghz 200mW AV transmitter is perfect for FPV applications. This unit offers a great low cost AV solution for your micro FPV models. Specs: Input Voltage: DC 3.7-5V Consumption current: 220mA Working Frequency: 2.4G Channel: 4CHS Output Power: 200mW Video input / video modulation: 1 Vp-p(FM) Audio input / audio modulation: 1 Vp-p(FM) Audio carrier: 6.0M Weight: 2.7g Dimension: 17.8*18.2*4.5mm Color: Silver Transmission distance (Open Space): 50Mï*½*ž*150M Operating Temperature: -10deg C ~ 55deg C Channels: 2414, 2432, 2450, 2468 PRODUCT ID: 381000021
victorlee  186 points - 6/29/2013
 
May I know the compatible 2.4Ghz AV transmitter for this product ? thank you.
Customer Reviews
Create an account
Overall Rating
LUNDY
402 likes
Value
Quality
Like it?
disappointing in every way ,don't buy this receiver spend a $ more for a good system .
This is toy quality .


2 comments. Reply..

Create an account
Overall Rating
GustPilot
363 likes
Value
Quality
Like it?
Doesn't interfere with 2.4 Ghz radio, that is a plus, range is dependent on the TX i am using it with 200mW, so limited range suits my application though


3 comments. Reply..

Overall Rating
Blue Angel
1351 likes
Value
Quality
Like it?
nice little receiver. does work with Airwave and Lawmate 2,4GHz channels. picture quality is good, so i cannot confirm the other bad review. I will test the range and give feedback, but that will take some time, since flying season is over here.


1 comment. Reply..

Overall Rating
Vladimir
1 likes
Value
Quality
Like it?
RTC6711 and RTC6721 based receiver, 2414, 2432, 2450, 2468MHz fixed frequency or can be tuned using SPI. Excellent device for small money.


2 comments. Reply..

Overall Rating
Hubert
4 likes
Value
Quality
Like it?
Super Set, Bitte nur darauf achten ob am Kamerastecker Plus(Rot) und Videoausgang(Weiß) vertauscht sind, (war bei mir so), ist auf der Platine mit ,-,Vout angeschrieben. Die Plastikbuchse kann an der Kamera von den Steckkontakten gezogen werden und einfach andersherum wieder aufgesteckt werden.


7 comments. Reply..

.....click here to see all reviews
Aff. Link