USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Speed Controllers > Car ESC
> Speed Controllers > 40 to 79 Amp
> Cars & Parts > Speed Controllers
> Cars & Parts > TrackStar > Speed Controllers > ESC

  RATED:

Turnigy Trackstar 1/10 45A Sensorless Car Esc

Turnigy Trackstar 1/10 45A Sensorless Car Esc
Turnigy Trackstar 1/10 45A Sensorless Car Esc

The Turnigy TrackStar 1/10th scale 45amp car ESC is the latest addition to Hobby Kings Car ESC range.

Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar 45A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. This translates in to very smooth start up and acceleration.

The Turnigy TrackStar 45A ESC also boasts a host of programing options not usually found in a 1/10th scale ESC at this price and can be programmed with ease via the Turnigy TrackStar programing card (sold separately) The Turnigy TrackStar 45A ESC also includes 3 x 14AWG Motor wires and 2 x 14AWG power input wires.

Specification:
Cont. Current: 45A
Burst Current: 90A
Car Size: 1/10th
Battery: 2-3 Cell Lipo 
S-BEC: 5.0V / 2A Output
Motor Type: Sensorless Brushless (2s 8.5turn, 3s 13.5turn - or higher)
Size: 40.5 x 37.5 x 24mm
Weight: 45g 
Battery Plug: Required
On/Off Switch: Yes
Reverse: Yes
Thermal Overload Protection: Yes
Battery Terminals: 14AWG size
Motor Terminals: 14AWG size

Programming Options: (Via Optional programming card)
Voltage Cut off
Drag Brake
Brake Strength
Punch Control
Reverse type
Motor Timing

PRODUCT ID: 9052000032


Weight: 150g Quantity: 
stock
10+
Price$29.15


acc.
  • Turnigy TrackStar ESC Programing Card

    Combo Price: $7.76   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated 5 crowns   
 
Total of 22 discussions.
Marco  3 points - 3/27/2014
 
There were no motor connectors included
 henry 10 points
you need 3.5mm bullet connectors
rc freakz  1 points - 3/5/2014
 
hello dose this modle of car come with a programing card
 Mwildmann 49 points
No, the programming card is not included.
Noob_Guy  1 points - 12/11/2013
 
Will this motor S3650-3300 Brushless Inrunner 3300kv (15.5T) work with this esc?
 Mwildmann 49 points
Max amperage of that motor is 59A. I wouldn't use this ESC with it. Better off going with a 60A or more ESC.
john  1 points - 11/1/2013
 
I am having trouble getting this controller to work with a S660-2670 brushless motor, is this the wrong ESC for this type of motor ?
 Benjamin 4 points
Esc need higher ampage for a 2650 somewhere around 80 to 160 amps
greenruby79  9 points - 10/1/2013
 
Hello, is there a connector at the end of the Blue/Yellow/Orange lead to connect to my motor? Or i need to solder them? If need to solder, what are the parts needed? Thanks
 Dan 10 points
Chances are it will have bullet style connectors on the ends. The battery wires tend not to though, but the wiring to connect to the motor, generally tend to use a universal plug, so it should connect fine. For the battery wires, you'll need the same connector as your batteries have, I prefer to use Deans connectors on 2-3s set-ups and bullets on 4-6s set-ups. Have a look on eBay, you can get 10 pairs of Deans with heat shrink for about £*4. In case you don't already know, when the Deans is laid down flat, the vertical connector goes to the positive (red) wire and the flat goes to the negative (black)
 Sirius35 34076 points
I just receive mine and no connector to end wire...
Customer Reviews
Create an account
Overall Rating

10 likes
Value
Quality
Like it?
Läuft Top , alles super


No comments. Reply..

Create an account
Overall Rating

3 likes
Value
Quality
Like it?
excellent esc bought to replace standard monster beatle esc and is superior in every way smooth start up smooth throttle response excellent brakes runs cool and the punch control works well get the trackstar programming card it makes it a cinch to program


No comments. Reply..

.....click here to see all reviews
Aff. Link