Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Multi-Rotors & Parts > Accessories
> Multi-Rotors & Parts > Frame Parts > Bumblebee Parts
> Multi-Rotors & Parts > Camera Gimbals > Standard Gimbals
> FPV & Telemetry > Camera Gimbals > Standard Gimbals

  RATED:

Camera Gimbal Tilt Mount for Bumblebee Quadcopter Frame

Camera Gimbal Tilt Mount for Bumblebee Quadcopter Frame
Camera Gimbal Tilt Mount for Bumblebee Quadcopter Frame

This camera gimbal tilt mount makes for stunning video recording capability with your Bumblebee Quadcopter. It included a pre-mounted metal gear mini servo which allows for tilt action.

This mount is constructed of high quality carbon fiber and features rubber grommets made of a special vibration-dampening compound which makes for superb video quality.

Specs:
Max camera width: 120mm
Max camera height: 183mm (measured at center of mount)
Weight: 101g



PRODUCT ID: 9031000023


Weight: 215g
Quantity: 
International Warehouse
stock
10+
Price $41.77

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
48
crowns
  
 
Total of 48 discussions.
Chris  2 points - 10/5/2014
 
I tend to be more of an impulse buyer when the shipping is in my country. because I hate to wait and the additional cost of shipping. In many scenarios of the purchase the cost of shipping puts the product out of affordability-at least it does for me. HK needs to concentrate more on keeping satellite warehouses stocked as much as their international warehouse.
Gentoo  5 points - 8/25/2014
 
How can i fit it in a dji F450?
 Mario 145 points
You can mount it by adding an landing gear but i would prefer a few bucks more for an 2 axis brushless gimbal becuse it's a milion time better than these
Iloveijproject  4 points - 7/31/2014
 
Does it stabilize your footage caused by the copter? So you keep filming steady horizontal?
 ddwow 21 points
It's depending on the copter, But it's working fine for me
max  10 points - 3/18/2014
 
I would also like to know if this would fit on an x650 frame
 Aaron 6 points
I can confirm that it does not fit the X650 frame out of the box. The "arms" coming off of the gimball are about 1 inch too wide for the X650 bars. However, since I paid $50 to get it here, I have removed the gimbal arms and zip tied the gimbal plate directly to the X650 bars.
Aurélien  1 points - 3/18/2014
 
what is the distance between the carbon tube for supporting ??
 Aaron 6 points
9cm / 3.5 in
Customer Reviews
Create an account
Overall Rating

10 likes
Value
Quality
Like it?
Great for my gopro with the ys-x6 gimbal control


1 comment. Reply..

Create an account
Overall Rating
tallflyer
89 likes
Value
Quality
Like it?
Great Camera mount for a GoPro unit comes 100pcnt ready to use out of the box. all you have to do is hookup the servo wire to a free channel and adjust your setting, I used a velcro strap to hold my GoPro in place here is the video
http://youtu.be/AOvArDjXzGE


No comments. Reply..

Create an account
Overall Rating
ANARIT-119
251 likes
Value
Quality
Like it?
A good product. The servo needs to be replaced as the rotation angle is less and it is very jittery!!! Use MG90S


No comments. Reply..

Overall Rating
Keith
9 likes
Value
Quality
Like it?
HI all
I have just unpacked this product and I have to say it is of the highest standard. I have done a lot of testing to isolate vibration waves from the footage of hexacopter filming and I have not found a gimble type mount, UNTIL NOW, that has addressed this issue. This mount has a two point isolation system. The first is the set of blue silecone isolators
at the mounting point and the second is a set of black isolators at the camera mount itself. This totally isolates vibration and is big enough to fit my JVC Everio HD video camera. I have seen many mounts this size for over $200 and they still have not addressed the vibration issues like this product has. The mount is also VERY LIGHT. Awesome product HK and thanks.


No comments. Reply..

Overall Rating
Keith
9 likes
Value
Quality
Like it?
I Love this gimble. It has isolated the waves in the HD footage and works a treat. If you watch the test video, you can see as you thrust forward, the camera stays level so you do not miss any footage. This is evident in the movie when the Habu jet is hand launched and the copter chases the jet as it picks up speed. Without the gimble, all you would see is grass as the copter tilts forward but it stays locked onto the subject (the jet ). I will be replacing the servo as it is a little jerky as can be seen at times in the vid. I have a JVC Everio camera mounted on the gimble lifted by a Dji F550 Hex. All up weight with a 5000 mah 4S is 2.6Kg. www.link Keith


No comments. Reply..

.....click here to see all reviews
Aff. Link