Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Multi-Rotors & Parts > Frame Kits

  RATED:

Hobbyking X666 Glass Fiber Quadcopter Frame 666mm

Hobbyking X666 Glass Fiber Quadcopter Frame 666mm
Hobbyking X666 Glass Fiber Quadcopter Frame 666mm

The Hobbyking X666 quadcopter frame is a high quality glass fiber frame that offers both great looks and performance. Built from light weight yet extremely rigid glass fiber and aluminum, the X666 offers a great combination of weight savings and strength.

The X666's aggressive styling makes it look just as sinister as its name, while still offering excellent functionality and performance!

This frame is based on the popular X525 V3 design, but features extended arm lengths of 666mm. This is a Hobbyking exclusive which means you will not find it anywhere else!

The X666 features a very nicely finished glass fiber main frame, shock-absorbing landing legs and folding aluminum arms. It also includes 3 silver arms and 2 black (5pcs total) so you can change them based on flying in + or X configuration for orientation. The shock-absorbing landing legs are a great feature to handle those rough landings that we all have from time to time.

We also offer a full line of multi-rotor electronics such as multi-rotor control board, ESC, motors and more, so it has never been easier or more affordable to get a quad in the air!

All necessary hardware is included.

Specs:
Width: 666mm
Motor Bolt Holes: 14~30mm
Frame Weight: 415g (w/out electronics)

Required:
Multi-Rotor control board
15~25A Brushless ESC x 4
2200~3000mAh 3S 11.1V Lipoly
28-XX 1100~1300KV Brushless motor x 4
8x4~10x4.3 Propeller - 2 standard/2 reverse rotation


User manual available for download located under "Files" tab.


Note: All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.



PRODUCT ID: 9323000044

This product available from a warehouse near you!


Weight: 605g
Quantity: 
International Warehouse
stock
10+
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price $17.50

esc
  • Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller

    Combo Price: $10.91   IN STOCK

  • HobbyKing 20A BlueSeries Brushless Speed Controller

    Combo Price: $10.01   IN STOCK



motor
  • NTM Prop Drive Series 28-26A 1200kv / 286w

    Combo Price: $14.95   IN STOCK

  • NTM Prop Drive 28-26 1350KV / 302W

    Combo Price: $15.95   IN STOCK



battery
  • Turnigy nano-tech 2200mah 3S 35~70C Lipo Pack

    Combo Price: $17.95   IN STOCK

  • Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack

    Combo Price: $16.95   IN STOCK

  • Turnigy nano-tech 2650mah 3S 35~70C Lipo Pack

    Combo Price: $22.95   IN STOCK



acc.
  • Hobby King Quadcopter Power Distribution Board

    Combo Price: $3.75   IN STOCK

  • 10CM Male to Male Servo Lead (JR) 26AWG (10pcs/set)

    Combo Price: $3.96   IN STOCK

  • HobbyKing Multi-Rotor Control Board V3.0 (Atmega328 PA)

    Combo Price: $15.95   IN STOCK

  • HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)

    Combo Price: $12.95   IN STOCK

  • Single 4mm Male to 4 x 3.5mm Female Adapter (1 set)

    Combo Price: $1.56   IN STOCK

  • 8X4R Propellers (Standard and Counter Rotating) (6pc)

    Combo Price: $2.65   IN STOCK

  • NTM Prop Drive 28 Series Accessory Pack

    Combo Price: $1.85   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated
535
crowns
  
 
Total of 153 discussions.
Krishna  6 points - 10/11/2014
 
Can we use 22-xx motor in this mount??
highamperage  7 points - 9/6/2014
 
Hey, does anyone know the distance between the screw holes on the motor mounts (Where it attaches to the square tube)? I am going to laser cut some new ones.
Cameron Gifford  6 points - 9/1/2014
 
Hi will this frame support 12 inch props without prop wash? If not how much is there expected and what other frames are able to use them? Thanks.
 Peter 12 points
Mine is fine with 12x4.5 props, the props completely clear the central area.
MCrab67  1 points - 9/1/2014
 
This will be my first quad build. Would the X666 frame, NTM Prop Drive 2826a 1200kv/286w short shaft motors, Q Brain 4 x 25a ESC, 3 blade 9 x 4.5 props, and KK2 hard case flight control board be a good start? How agile and responsive would this setup be and what battery requirements would I need? Any ideas for improvement?
 Peter 12 points
Sounds good but i'd use 2 blade props, more efficient. 3000mah is good for unloaded quad and it's what i use on mine, (2830, 900KV, 12x4.5 props) Get something with high C rate. My pick would be about 4000mah and 40-50C, Don't skimp too much on your batts. Good luck.
BEST ANSWER CREDIT AWARDED
 loowxwool 13 points
See description under my video. It's similar setup.
ashwin  22 points - 8/26/2014
 
can i just zip tie dt 750 motors to the arms without the mount supplied with this frame. please answer thanks
 Peter 12 points
Would probably work. Try it. Personally not my idea of a good solution. Be creative with the cable tie placement though, and secure with a dab of hot glue to prevent it sliding off the smooth arms.
BEST ANSWER CREDIT AWARDED
Customer Reviews
Overall Rating
jcaf007
70 likes
Value
Quality
Like it?
I just receive this frame yesterday, well build, no instructions, i use the instructions of the 525 frame it looks the same. the screws are good, but only have 4 nylon screws to mount the Control Board, if you have to mount the Hobby King Quadcopter Power Distribution Board its is a little dificult because of the space. I put one above the other lets see if there is no vibration. This frame have 2 arms paint black to indicate the front but this color is not very good for, i will paint in orange later and put a green propeller for better orientation.


3 comments. Reply..

Overall Rating
matt
8 likes
Value
Quality
Like it?
Just got this frame in yesterday, very nice frame for the price. All the materials are of good quality, all holes line up correctly, and the hardware is very nice. I had no issues with assembly. This thing is huge!! I had a v1 talon and the x666 is a monster compared. I was going to try to fab my own quad, but with the x666 being only $24 why bother ;)


1 comment. Reply..

Create an account
Overall Rating
RC-XDream
8 likes
Value
Quality
Like it?
Sehr stabil und gut durchdacht das ganze . Einfacher zusammen .


1 comment. Reply..

Overall Rating
Capt Ylee
52 likes
Value
Quality
Like it?
Very nice frame. Easy assembly, Used the HK i86, Turnigy 28-30-750kv, HK blue 12A ESC, FlightMax 3s1p 2200 20C, 10x6 GWS clone props, FrSky TFR6 FASST 2.4ghz. Had to extend the ESC power wires. Board/ESC setup took a bit of reading but not too difficult. Still tuning the board but it flies fine. about 6 minutes per battery in windy conditions.


10 comments. Reply..

Create an account
Overall Rating
gvitit
54 likes
Value
Quality
Like it?
www.link


No comments. Reply..

.....click here to see all reviews
Aff. Link