Turnigy nano-tech 3000mAh 2S1P 20~40C LiFePo4 Receiver Pack

Item found in the following categories;
> Batteries & Accessories > LiFePo4
> Batteries & Accessories > 20C Discharge
> Batteries & Accessories > Rx/Tx Batteries
> Batteries & Accessories > Turnigy nano-tech

RATED:


	Turnigy nano-tech 3000mAh 2S1P 20~40C LiFePo4 Receiver Pack

Turnigy nano-tech 3000mAh 2S1P 20~40C LiFePo4 Receiver Pack

Typically reserved for high amp draw performance applications Turnigy nano-tech batteries represent the pinical of performace, reliabilty and value for money. Taking these same manufacturing principles and technology, our engineers crafted a line of receiver specific LiFePo4 batteries for those seeking dependability, quality and and life cycle unequaled by any other battery on the market today. When quality counts go with the worlds most trusted performance battery, Turnigy nano-tech.

Turnigy nano-tech LiFePo4 batteries (a lithium-ion-derived chemistry) utilize lithium iron phosphate as a cathode material which offers exceptionally long cycle life and greater thermal/chemical stability when compared to a standard Lipoly battery.

*Note: This is a LiFePo4 battery. You will need to use a LiFePo compatible battery charger when charging these batteries. NEVER attempt to charge these batteries in standard Lipoly mode or with a non-LiFePo compatible charger as damage or personal injury may occur.

Spec.
Capacity: 3000mAh
Voltage: 2S1P / 2 Cell / 6.6V
Discharge: 20C Constant / 40C Burst
Weight: 167g (including wire, plug & case)
Dimensions: 132 x 44 x 15mm
Balance Plug: JST-XH
Discharge Plug: JST & Futaba

PRODUCT ID: 9210000049

This product available from a warehouse near you!

Capacity(mAh)	3000
Config(s)	2
Discharge(c)	20
Weight(g)	167
Max Charge Rate (C)	5
Length-A(mm)	132
Height-B(mm)	44
Width-C(mm)	15

Update/Add my own data
Customer Data

239g

10+

$18.79

Further discounts available for registered & logged-in customers.

Customer rated

5 crowns

Total of 15 discussions.

ddrmax69

28 points - 5/30/2013

Can i use this with turnigy 9x RX and hitec standard servos ???(6)

George

5 points - 5/10/2013

Is it ok with futaba R617 receiver and A6010 spectrum servos?

RCJETJUNKY

65 points - 4/13/2013

I am confused this battery is rated 20-40c ??? I thought the plugs supplied on this battery can only safely handle 4-5 amps how can you take advantage of its 60-xxx amp capability ???

Motti

5 points

this is bad battery- stoped working after less then 6 months the cell drop down dv =1.11v not recomned

Badar

2 points - 3/31/2013

****

Marcelo

15 points - 3/11/2013

May I use in Hitec Optimas 7 or 9 Receives?

Brad

1 points - 2/6/2013

Is this voltage ok in hitec and futaba receivers? I use 6 volt nimh packs now that when fully charged are around 7.2 volts. I am assuming this will work but just want to be sure before I use one.. thanks

luxury roller

10 points

Yes it works

jsvjunior

7 points

ideal perfeita serve pra qualquer aeromodelo.

George

172 points - 2/5/2013

Will this work with the Turnigy TH9X?

TaterTotDW

200 points

This will work fine.

BEST ANSWER CREDIT AWARDED

TaterTotDW

200 points

I am very sorry about this but I was wrong. Somehow I got confused with what battery I was looking at and typed this on the wrong webpage. This isn't good for a transmitter, only a receiver. A battery you may want to consider looking at is the Zippy 1800 mah 5C 9.9V LiFePO4 battery. This battery should fit. Again, I am very sorry about my previous answer.

loloramos

5 points - 1/23/2013

weight.... 239gr or 167gr?

SergioT

14 points

Weight: 167g (including wire, plug & case). To shipment is 239g.

Bill

5 points - 10/8/2012

Is the discharge plug suitable for JR?

Gary

3059 points

Yes,you get a BEC type plug for use with regulators etc and a JR/Futaba type plug,if using with JR you will need to file off the small piece of polaring plastic on the side of the plug.

BRYON

20 points - 9/21/2012

Does anyone know if this will physically fit into a Futaba 8FG? Thanks in advance!

Gary

3059 points

I think you will find the B measurement of the original battery is around 35mm,this one measures 44mm,other dimensions look ok.

Marnix

6 points - 9/7/2012

Can I use this batterypack , to my powerbox Evolution, without any problem ?

bigdog

10 points

****

Selecters75

2 points - 7/17/2012

What kind of charger do I need for this kind of battery. I have one of this (Turnigy balancer & Charger 2S-3S): http://www.hobbyking.com/hobbyking/store/__7637__Tur
nigy_balancer_Charger_2S_3S.html.
But
If I'm not wrong, I need a different one, right? something like this one? (HobbyKing Simplex 1~4S LiPo/LiFe 12,110~240v charger.): http://www.hobbyking.com/hobbyking/store/__10946__Ho
bbyKing_Simplex_1_4S_LiPo_LiFe_12_110_240v_charger_.
html

Could
anyone confirm? Thanks in advance.

Rudi Renntier

8 points

Hi Selecter. The simplex would work but if you charge also other batteries go for something like www.link can use it for most of the batteries we use in our models.It need a Input Voltage 11~17v (carbatterie) and if you like to use it at home you would need a power supply. Greetings

Rudi Renntier

8 points

link for the www.link

Rudi Renntier

8 points

www.link Accucel-6 50W 6A Balancer/Charger w/ accessories

mauritsfpv

11 points - 6/16/2012

Does it battery fit in my futaba ff9 35mhz? and is the voltage not too high? the standard battery pack from futaba is 9,6 volts thnx!

dhruv

103 points

I think you should stick to what is recommended for the transmitter.

FNAwolf

3 points - 6/16/2012

can i use it direct to Receiver to Servos with out using Regulator?

Chad

1 points

Yes I'm using one in my heli with a $pektrum receiver and servos direct connected with no trouble.

Munich

79 points - 6/4/2012

Can i use this Life for my Sanwa MT-4 Receiver ?

becool

33 points

Yes you can, the receiver that comes with Sanwa MT-4 can handle up to 7.4v and this battery is 6.6v. (NB! Receivers RX-371, RX-441DS and RX-442FS can't handle this high voltage battery, so if you have one of those receivers, don't use this battery)

BEST ANSWER CREDIT AWARDED

Chad

1 points

Yes you can

João Antonio

2 points

Boa noite Chade, gostaria de saber se posso utilizar esta bateria (6.6 volts)sem regulador* diretamente eum um receptor Futaba R617FS 7-Channel 2.4GHz FASST Rx (Genuine). Ou seria melhor um regulador. Obrigado.

alain1212

68 points

pode usar direto sem problemas , é* muito melhor e mais confiavel do que bec

João Antonio

2 points

Obrigado pela atenç*ã*o.

Mikoyan_CN

78 points

hi alain1212, please send the buddycode to my email. I will buy from ur code. imkyaky "at" gmail "dot" com

Mikoyan_CN

78 points

hi alain1212, please send the buddycode of ZeroUAV YS-X4 Autopilot GPS Flight Control System for Multi-Rotor (Navigator Version) you bought. I will buy it from ur code. Please email me the code. imkyaky "at" gmail "dot" com

Customer Reviews

Overall Rating		3/26/2013 Rudi Alberto 1 likes
Value
Quality

Like it?

¿Puedo usar ésta batería directamente sin una UBEC en mi receptor? o sea para alimentar los servos

1 comment. Reply..

Overall Rating		3/31/2013 Badar 2 likes
Value
Quality

Like it?

Light, safe, proper dimensions to fit any model, the thing I really like is the 2 plugs switch it comes with, it is really convenient to use. So far so good, the only thing that I was confused with was the voltage, the normal lipo would read higher when fully charged, this one was rock solid at 6.6 - 2 volts .

No comments. Reply..

Create an account

Overall Rating		4/1/2013 mentor 34 likes
Value
Quality

Like it?

Amigos de hobby king recomiendo este producto y ademas pongo cinco estrellas por que exelente precio y calidad

No comments. Reply..

.....click here to see all reviews