Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> FPV & Telemetry > FPV > Cameras
> FPV & Telemetry > FPV > Video Tx/Rx > 2.4GHz

  RATED:

2.4GHZ 100mW Tx/Rx & 1/3-inch CCD Camera PAL (520TV line)

2.4GHZ 100mW Tx/Rx & 1/3-inch CCD Camera PAL (520TV line)

12 Channel Tx/Rx video system with CCD camera.
The camera uses a quality glass lensed SONY CCD camera system. 
 
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
Included.
1 x SONY CCD 1/3inch Camera
1 x 2.4GHz 4 channel Video Transmitter (100mW)
1 x 2.4GHz 12 channel Video Receiver  


Camera spec.
CCD sensor type:1/3 color SONY CCD  
Pixel;
NTSC: 510(H)*492(V)  
PAL: 500(H)*582(V) (Included)
Scanning system: Interlaced scanning
Synchronization: System:Inter
Horizontal resolution: 520TV line  
Minimum Illumination 0.01LUX/F1.2
DSP+CCD: CXD3142R+405AK
S/N Ratio: 48dB  
Gamma Modification: 0.45  
White balance: Auto
Auto backlight compensation: Auto
Lens: 3.6MM
Audio: No
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s  
Video output: 1.0VP-P composite video  
Operation Temp.: -20~50
Size: 38*38mm
Flight time: Approx 60min/100mah 3S
 
FPV Tx Spec.
Channel: 4-Ch, AV synchronization
Power: 100mW
Input voltage: 8~12V
Weight: 29.9g
Size: 41x28x16mm
Frequency: 2.4G 2.410G/2.430G/2.450G/2.470G

PRODUCT ID: 9171000023


Weight: 409g Quantity: 
stock
-1
Price$70.55


Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
Stock usually arrives every 10-25 days.
 Customer rated 4 crowns   
 
Total of 17 discussions.
hanggar_mungil  2 points - 2/4/2014
 
at my country use PAL television systems, are i'm must choose FTV with PAL systems.? i have plane DIY googles with 4.3" LCD monitor.
Samee  42 points - 11/28/2013
 
how much range can this handle
 jose antonio 4 points
200-300 meters
Hugo  8 points - 8/13/2013
 
Is this legal in Australia?
Paul  4 points - 7/30/2013
 
Can I use 2.4ghz 100mw tx and rx with 2.4ghz receiver at the same time? God Bles
 Ram Kiran 161 points
Do u mean 2.4ghz radio for aircraft control!! No you can not use with 2.4ghz radio. u should choose some other frequency.
 Martijn 41 points
Why not
Simon  10 points - 6/23/2013
 
Can anyone reccommend a good antenna upgrade for the tx and rx sides. What are the antenna connector specs on the aircraft TX and ground RX? (SMA or R-SMA?)
Customer Reviews
Overall Rating
Gabe
8 likes
Value
Quality
Like it?
I have been useing this product for a couple years now. you might notice when the AV transmitter is on a vibrating aircraft you will lose picture. this is due to bad connections in the channel selector switch. to solve this I took it apart and soldered it to one specific channel. I've also made an inverted vee dipole antenna for the transmitter which allows me to do rolls and loops without losing picture.


No comments. Reply..

Overall Rating
0x0539
61 likes
Value
Quality
Like it?
When testing the system for the first time on my workbench I had some troubles to get it working, I was able to "see" when the TX was powered on and on the correct channel but the image was nothing more than black and white, zebra-style, pattern. After reading the discussion page for the product I was directed into a broken CCD or bad wiring on the camera plug.. which both of them were wrong conclusions; the true problem was the AC to DC transformer I was using to power the video receiver, it was a cheap one from CN with multiple output voltages.. *do not use* such thing ! I replaced it with a proper regulated transformer and everything worked flawlessly. CCD's PCB solderwork is awful with some components barely making contact with the traces and TX's case/heatsink is way too big.. but in the end good bang for the buck, highly recommended and a base kit to start at FPV.


No comments. Reply..

.....click here to see all reviews
Aff. Link