Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Servos & Parts > Turnigy Servo
> Servos & Parts > Park Servo 21-30g


Turnigy™ TGY-306G Ultra Fast/High Torque DS/MG Alloy Cased Servo 3kg / 0.06sec / 21g

Turnigy™ TGY-306G Ultra Fast/High Torque DS/MG Alloy Cased Servo 3kg / 0.06sec / 21g
Turnigy™ TGY-306G Ultra Fast/High Torque DS/MG Alloy Cased Servo 3kg / 0.06sec / 21g

TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo  3kg / .06sec / 21g - Excellent 450 Heli & 3D servo.

Model: TGY-306G
Operating Voltage: 4.8V / 6.0V
Operating Speed: 0.07sec.60º/ 0.06sec.60º
Stall Torque: /
Size: 23X12.1X25.8mm
Weight: 21g
Motor: 12mm Coreless
Potentiometer: indirect Drive
Ball bearing: Top Ball Bearing
Gear: Metal
Case: Aluminum
Connector wire: 220mm
Plug: JR/Universal


PRODUCT ID: 9355000004

Weight (g) 21
Torque (kg) 3
Speed(Sec/60deg) 0.06
A(mm) 31
B(mm) 23
C(mm) 28
D(mm) 12
E(mm) 32
F(mm) 20
Update/Add my own data
Customer Data

Weight: 38g
International Warehouse
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price  $23.10

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
Total of 142 discussions.
Christopher  10 points - 11/14/2015
I see reference to the head screw size to be M2.3x.5 in the discussion below, but I have found no-where to buy them (HK or otherwise). Anyone able to provide a link? Thanks
 James 428 points
try your local hardware shops, these screws may be common
Agustinus  2 points - 11/3/2015
Eh, I lost my question. Let me repeat. I am looking for its arm accessories and found out that its accessories titled kst 115/215 servo arms from helifreak forum. The only accessories I found is this: https://alofthobbies****/kst-ds115mg-ds215mg-g
ear-set.html and
it seems that the connector is a gear instead of gear hole. Can anyone advise me? Actually I am looking for: mounting accessories arm accessories to make the output a gear with module of 1. Thank you!
 James 428 points
Have you tried moulding your own arm? and customise it? seems like a good idea
 Agustinus 2 points
*James, thanks for the recommendation. I tried to come to my local manufacturer company and they can't make it because the hole will be to small. Also, the item in the alofthobbies link is wrong.
 James 428 points
try this one
edimp1  14 points - 7/30/2015
How many teeth must have a servo horn for this servo??
 ghostW 3 points
you can use hitec arms for this servo
Murland  3 points - 5/6/2015
is there a way to get replacement gears for these?
Tan  2 points - 4/21/2015
Hi,can anyone advice what is the freq and pulse setting for this tgy306g servo cos intend use it for tail on 450 heli? Thks
 stewart 4 points
Hi this works fine as a 450 tail servo on the zyx I just select 1520microsecond frame rate and digital. It's a fast stable tail servo
Customer Reviews
Create an account
Overall Rating
Like it?
Arrived boxed up and with full accessary set. Good length on the lead. The case is well finished and looks good. There is zero slop in the gear train and the output shaft is free form wobble. The whole servo feels solid. The servo is fast on my servo tester, and basically I cannot fault it. I will be putting this to the test on a 450 tail, I figure it would also do equally well on a cyclic set up.

9 comments. Reply..

Create an account
Overall Rating
Like it?
Цена этих серво машинок просто замечательная, относительно других производителей! Что то подобное видел по цене не ниже 30 долларов. Думаю качество не будет на высоте! На наклейке написано, что сервы сделанны в Тайване, возможно их производят на том же заводе, где выпускают сервы МКС, например DS95, но в серве MKS DS95 используется немного другой редуктор по описанию, там стоит титановый, здесь же описано, что редуктор металический, не думаю что это полная копия! Как придут дам более полный обзор. Я их покупал для 450Про вертолета с безфлайбарной системой, для управления ротором.

3 comments. Reply..

Overall Rating
Like it?
All gears are metal (some looks like aluminium, some - brass, and main gear is a bit different color as other aluminium gears, probably different alloy). So far so good, very quiet, no slop (well, compared to 3 other 20-30$ servo i have here) and very very fast. And by telling "fast" it's not only numbers (for example, prod id 14279 "on paper" has the same speed, but on tester looks like turtle compared to 306G). I do not fly heli, so can't tell where it could fit or it could be easily stripped away (like someone told in discussions tab), but i'm going to use it in very fast wing. Overall - very good quality, and good price. Will buy more.

No comments. Reply..

Create an account
Overall Rating
Like it?
pour mon futur 450, mais j'ai pas le temps de le monter maintenant, donc pas de review pour le moment, mais rien qu'à les voir, je suis sur qu'il mérite 5 étoiles.

7 comments. Reply..

Overall Rating
Like it?
So far so good. Works great on tail of an older 450 v2. Really wish it came with a round horn as well. I have read about stripping the metal splines on a crash so I notched the horn just a little hoping it breaks if I ever crash. It's quite heavy for its size - but lighter than the mini servo I was using before it by just a few grams. But for cyclic I think you would be weighing down the heli quite a bit. Might be worth it though if using a FBL setup.

8 comments. Reply.. here to see all reviews
Aff. Link