Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > X-Large Servo 50gplus
> Servos & Parts > HobbyKing Servo


HobbyKing™ Mi Digital Brushless Magnetic Induction Servo HV/MG 6.8kg / 0.16sec / 57g

HobbyKing™ Mi Digital Brushless Magnetic Induction Servo HV/MG 6.8kg / 0.16sec / 57g
HobbyKing™ Mi Digital Brushless Magnetic Induction Servo HV/MG 6.8kg / 0.16sec / 57g

The HK Mi Series servos represent the next break through in high precision servo technology. Using Magnetic Induction rather than a potentiometer, they offer an unsurpassed level of accuracy and performance, the Mi Brushless series also use low drain brushless motors for extended motor life and therefore reliability, finally HV operating voltages means this servo can operate directly from a 2s Lipoly Battery, eliminating the need for voltage reduction devices like UBECs and Regulators for extra peace of mind.

Voltage: 6.0v / 7.4v
Speed: 0.19sec/60deg (6.0v) - 0.16sec/60deg (7.4v)
Torque: (6.0v) - (7.4v)
Size: 40mm x 20mm x 37.5mm
Weight: 56.7g
Gear Train: Full Titanium Alloy
Motor: Brushless
Casing: Alloy Heatsink Centre
Ball Bearing: 3
Lead: 300mm HD with Universal/JR Plug

 Mi : Magnetic Induction, uses a Magnetic Rotary Encoder in place of a traditional potentiometer (invented in 1877). Magnetic Rotary encoders have a longer life and suffer less wear.



Weight (g) 57
Torque (kg) 16.8
Speed(Sec/60deg) 0.16
A(mm) 44
B(mm) 40
C(mm) 40
D(mm) 20
E(mm) 55
F(mm) 30
Update/Add my own data
Customer Data

This product is no-longer available. CLICK HERE TO SEE A WIDE RANGE OF SIMILAR ITEMS

  • HK47360TM-HV and MIBL-70360 Replacement Servo Gear Set

    Combo Price: $6.46   IN STOCK
    Add to Cart

Further discounts available for registered & logged-in customers.
 Customer rated 0 crown   
Total of 3 discussions.
Ramazan  1 points - 10/20/2014
Is this servo continues?
Ravi  1 points - 7/5/2012
Can I use this servo On the Traxxas spartan
 william 26 points
yes you can because it is the right sise and it fit but no you cant because it is not waterproof you choose if you want waterproof or not
Stephen  2 points - 6/10/2012
MIBL-70460 Servo

Can this servo provide 360deg of rotation? Is a programmer required?
 acetech09 23 points
No, and no. I don't own one of these so not 100% sure but I've seen the 56g ones in action and I doubt that the builder would use 360deg servos for ailerons.
 Egg Man 122 points
Don't run these at over 280hz, the digital amplifier can handle the frequency (as per the specs on blue Arrow's website) but the servo's heat dissipation isn't enough to get rid of the excess heat and it will cook itself to death, especially if used on a gyro. Stay at 250hz and it's a good servo.
 Egg Man 122 points
Actually I take that back, they seem to run fine at 333hz with no overheating. It may depend on your gyro. I would try running it at 333hz and if it starts getting too hot drop down to 250hz YMMV
Customer Reviews
There are currently no reviews for this product.
Be the first to review it by clicking the link above!
Aff. Link