Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Speed Controllers (ESC) > All Speed Controllers (ESC)
> Speed Controllers (ESC) > Plane ESC > TURNIGY ESC
> Speed Controllers (ESC) > 40 to 79 Amp
> Multi-Rotors & Parts > Speed Controller (ESC) > Turnigy Plush

  RATED:

TURNIGY Plush 60amp Speed Controller

TURNIGY Plush 60amp Speed Controller

Plush 60A Brushless Speed Controller
The plush series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.
This BESC can handle 3A continuous current which is great for larger planes with bigger servos.

Cont Current: 60A
Burst Current: 80A
BEC Mode: Switching
BEC : 5v / 3A
Input: 5.6v-22v
Weight: 60g
Size: 80x31x14mm
Supported motor speed for all TURNIGY ESCs is;
(Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).

User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!



PRODUCT ID: TR_P60A

Shipped from:
International Warehouse

Price

$34.98

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
5784
crowns
  
 
Total of 231 discussions.
zeeek1  581 points - 12/28/2015
 
There are escs that will run two brushless motors on one esc. Go to YouTube and search for 2 motors on 1 esc using a T180 esc. The worst case is you use motors too amp hungry for one esc or one motor may start in opposite direction.
 Christ 823 points
Hello Zeeek1 for sure if you happy with this unsure type of working, then it is OK. anyway the best solution is still to have 1 ESC per motor (or some special ones for QUAD - but this is 4 ESC on one block in a shape designed for Quad) there is almost no price benefit, no weight benefit and less security as if the ESC fail then you have ZERO motor running. Enjoy your hobby
pretheepan  3 points - 10/29/2015
 
hi guys can I run two G810 motors with this ESC please?
 ElectricAussie 4355 points
Hi pretheepan, I'm 99% certain that you can't run 2 motors at one time off this type of ESC. ESCs use a pulse counter from one of the coils in a motor to control the motor speed. Splicing 2 motors onto the same ESC would cause the pulse signals to override each other and "confuse" the ESC. As I said, I'm not 100% certain of this and would love to hear from other readers who have tried to do it. Cheers, EA!
 Christ 823 points
Hello Pretheepan absolutely never. you can not use 2 brushless motors on the same ESC. The ESC is measuring the electromagnetic feedback from the motor to find out the correct timing. you should be exactly sure that the 2 motors are synchronized exactly (thru a mecanical gear box) to have a very small chance to get it running. Better buy 2 ESC or select 2 cheaper ones if price is a concern. Enjoy flying
 zeeek1 581 points
See two motors on one esc: /watch?v=O0iMQ9rQNuo
navin  2 points - 10/1/2015
 
Are this pre-soldered ?
 Eryczqiu 18 points
It comes with Rx extension assembled, all other wires come ready to solder on your own connectors, if that's what you're asking for.
apucjames  5 points - 8/24/2015
 
After installing in airplane, when battery is plugged in the esc in making continuous beeps and does not work. What is the problem?
 Peter 1 points
Sounds to me is that you have throttle applied upon initialisation. Ensure your throttle trim is all the way down then re-liven up
 Beemer444 22 points
Once your receiver is "Bound" turn it off. Then, with the throttle on your radio FULL OPEN, turn on the receiver again. The ESC will make two quick beeps, shut the throttle quickly and ESC should make two more quick beeps. The throttle is now "Calibrated" and should work the ESC throttle correctly now? Peter.
 Beemer444 22 points
Disregard my previous instruction where I said "turn on the receiver again" I should have said PLUG IN THE ESC AGAIN. When it re-energises it will go through the calibration process.
Bobo22  38 points - 8/16/2015
 
****
Customer Reviews
Create an account
Overall Rating
Buena ricos
76 likes
ValueUNRATED
QualityUNRATED
32 thumbs up!
NEW!!! Version 3.1
Turnigy Plush 60A ESC

This is the newest version out. It is designed to run conservatively at 60A with a 80A burst rating. This ESC can definitly handle those numbers without a problem. It can be used with 2 cell to 6 cell batteries and the UBEC is rated for 5V @ 3A. The dimensions were right on spec. I threw it on the scale when I received it, measured out to 59.6g, & 80x30x14mm.

I'm running this on my 60mm EDF Jet with a Hoffman Magnetics Mighty Mite I bought here on HobbyKing. I use a FlightMax 4S 2650mAh 40C for 106A and over 1500W.
This jet is FAST! Clocked over 130mph.
Note: If you're thinking about getting a Turnigy ESC, spend the extra dollar and get the PLUSH. You will not regret it. Worth every penny. Also, you can do any programming you might need with the Turnigy BESC Programming Card. Again, like all Turnigy products, very easy to use.
Enjoy!


14 comments. Reply..

Overall Rating
mark s
likes
ValueUNRATED
QualityUNRATED
30 thumbs up!
A good esc.The price helps us in the hobby who are on a budget and looking for a bargain.This esc is one of those gems......

Im using it in my edf f-16, drawing 48 amps, no problems........

Oh, and my tip of the day is get the programming card with it...............


7 comments. Reply..

Overall Rating
Lawrie Henrickson
likes
ValueUNRATED
QualityUNRATED
28 thumbs up!
Only downgraded to 4 stars due to the heat-sink being wrapped inside the heat-shrink cover.

Mated this with my HXT 35-42C 1000kV motor and 4S2P 2600mAh LiPo, for 60A / 800W power!

ESC handled all of this with ease. VERY linear throttle response.
Switching BEC is excellent and handled 4 servos in 3D flight mode without trouble. Sure beats worrying about a linear BEC or a separate BEC.


1 comment. Reply..

Overall Rating
Steven Elston
likes
ValueUNRATED
QualityUNRATED
25 thumbs up!
Was surprised when I received this as what showed up had OEMRC printed on it! Nevertheless I tried it out in my Electro Telemaster (80" WS) with a TowerPro Brushless Motor 3520-7 (a great motor). I was spinning a 13 X 7 APC E prop and 5S1P A123 Pack pushing 16.5V @ 2300Mah. What a tremendous setup! I can fly for about 25 mins with throttle management (the Tele is a floater) and I have power to go vertical if I want, all for a great price. Smooth throttle curve, easy programming and doesn't freak out on a123 cells..what else can I say?


No comments. Reply..

Overall Rating
tim hanstine
likes
ValueUNRATED
QualityUNRATED
20 thumbs up!
This ESC is AWESOME!!! Running on the front of a Hyperion Super Chipmunk 70E (3200g) with a Turnigy 50-55B, 14x7 E prop, and HXT D9 G2 4100mAh 5S. Lift off in about 30 feet, and will climb for DAYS...

Can fly scale with tons of power to spare. The guys all freaked out when I had my "vintage" plane hovering at half throttle then pulling out into the heavens!

Also running on smaller, lighter Extra 330s (1500g) with a power 25 and 4s battery overpropped, but everything still comes down cool.

Plush ESC's are the way to go!


2 comments. Reply..

.....click here to see all reviews
Aff. Link