Turnigy nano-tech 8000mAh 5S 25~50C Lipo Pack (USA Warehouse)

Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 25C Discharge
> Batteries & Accessories > Turnigy nano-tech

RATED:


	Turnigy nano-tech 8000mAh 5S 25~50C Lipo Pack (USA Warehouse)

Turnigy nano-tech 8000mAh 5S 25~50C Lipo Pack (USA Warehouse)

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 8000mAh
Voltage: 5S1P / 5 Cell / 18.5V
Discharge: 25C Constant / 50C Burst
Weight: 927g (including wire, plug & case)
Dimensions: 194x45x47mm
Balance Plug: JST-XH
Discharge Plug: HXT 4mm

*
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

PRODUCT ID: N8000.5S.25

Capacity(mAh)	8000
Config(s)	5
Discharge(c)	25
Weight(g)	927
Max Charge Rate (C)	5
Length-A(mm)	194
Height-B(mm)	45
Width-C(mm)	47

Update/Add my own data
Customer Data

1175g

10+

$87.99

Further discounts available for registered & logged-in customers.

Customer rated

5 crowns

Total of 1 discussions.

Jim

10 points - 9/19/2012

Hobby King is poor for customer service and even worse for shipping. I ordered these 5 days ago and they have not been shipped as of yet. I actually ordered this month one order from China and one from the US warehouse on the same day and got the orders one day apart! Other shops ship within 24 hours and I have to say this is poor support by HK.

Customer Reviews

Overall Rating		adam 73 likes
Value
Quality

Like it?

Received 3 packs all cells read 3.83v Thickest measurement 49mm Widest measurement 53mm (negative lead runs length of pack) longest measurement 200mm (excludes wire)

No comments. Reply..

Overall Rating		MACyoda 5 likes
Value
Quality

Like it?

I got these to power my eBike, they are awesome. Of course, my motor only requires 37V at 35 amps continuous 65 peak, so I can't stress them out very much. I have been running them for about 4 months and they only get warm when I ride high speed hills while running them very low, accidentally.

No comments. Reply..

.....click here to see all reviews