2.5mm F:2.0 Turnigy Micro FPV Camera Lense

 Roger 2257 points

Yes, fits perfectly.

 Thorax78 231 points

yes it fits.

 ViniciusFantini 36 points

Not this big! For 1/3 cameras.

 laurentjeuxlille 26 points

Yes you can use it with the HK cameras. I made it, and it works. Great angle of view is much better with this lens than with the HK standard one. Have fun !

 IsraelR 9 points

yes i actually bought a couple of wide angle ones, and the 2.2 convinced me the most. Actually it doesnt matter if it is C or Cs type as long as the thread is 12x0.5mm. as you can adjust the distance from chip depending of how much you thread the lens on the camera.

 HomemAranha 62 points

Yes, for sure. All these lenses are 1/3 and fit on MTV mounts. It will fit all HK cameras even fatshark ones.

 cwfsc 66 points

I do think so. Thank you.

 cwfsc 66 points

What a pity. Price?

 cwfsc 66 points

Hey! Order done

 Maurice 38 points

I bought this lense for a spare for fatshark Dominater FPV set. But when I screw the new lense in my picture is only in black and white no colours, but when I put the old lense in the colours are here!! What could this be? Is it compatible with fatshark Dominator camera?

 Victor Octavio 4 points

Maurice, this lense dont have a external ir cut filter, i use one of a old webcam :)

 HomemAranha 62 points

if you really want fisheye like lense then go for the 2.1mm. It will distort the border a bit (curve like image at the edges).

 Roly. 35 points

No, that is on the sensor element in the camera itself.

 FusionTiger 1476 points

Not always. Infact, the IR cut filter is usually on the lens, either built into it or a piece of square filter bonded to the rear.

 Webmaven 49 points

For HK cams the IR filter in on the sensor element. Yes some cams have it on the lens but not in the case of the HK cam.

 theelwopo 2 points

i have a HD Wing Camera 1280x720p 30fps 5MP CMOS
can this lense replace it/