KD 36-12M Brushless Outrunner 1370Kv

Specifications

RPM / V (Kv)

Battery

Operating Current (Amps)

Peak Amps (15sec)

Prop

KA36-16M

1050

3 Lipo

11?~5

KA36-12M

1370

3 Lipo

9?~4.5

Total of 7 discussions.

camgl

5 points - 4/16/2013

what is the watt rating on this motor

Bsd Racing

153 points - 10/9/2012

Can any one tell me how far apart the mounting holes are. thanks would any one know how long it will go for on 3300mah lipo.

Gary

2963 points

Have struggled to find the exact measurement but think it is 25mm which is standard for this size motor,should get around 12/13mins run time.

stanicaf

12 points - 9/22/2012

I want to know what is distance between mounting holes on the front of the engine, 19 mm or 25 mm?Thanks.

Judith

2 points - 2/22/2011

If took an air hogs titan foam glider (the throw glider made of foam that peaple love to convert to RC) and converted it to RC would this be a good motor to put on the front of the plane with a Turnigy Type A Beech wood 8x4 propeller.

realmavi

19 points

powerfull strong engine...it pulled 2,5 kg.

T3rry

307 points - 10/13/2010

does this work smooth at very very slow speeds? no cogging?

Sal

14 points - 6/14/2009

which outrunner is equivilient to a e-flight 25 and 32

Lee062988

150 points

the turnigy g25 and the turnigy g32... Great motors just match up the kv rating.

craftsman1

14 points -

Do you sale the prop adapter (the one that uses four screws to mount)separate from the motor package?ThanksGordo

craftsman1

14 points

It is the prop adapter shown at the end of the motor shaft in the picture of the KA36-12M.

Thanks

Customer Reviews

Overall Rating		Robert Fishkin likes
Value	UNRATED
Quality	UNRATED

9 thumbs up!

Great motor for my purposes..Used it on a 1800 gram home built with a Jeti 40 amp esc, an 8x6 3 blade prop on a 2250 20C 3 cell. Pulled a max of 34 amps. Flew it in too much wind for the plane but still gave me good headway. Plenty of power am ordering another.

No comments. Reply..

Overall Rating		Daniel Berroya likes
Value	UNRATED
Quality	UNRATED

7 thumbs up!

Excellent motor for the Yak 54, paired with 35 A ESC, 10x5 eprop. Goes ballistic vertical, hovers at 50pcnt throttle, 3D with authority until you turn blue in the face with excitement.

Great product, fantastic price, fast delivery and excellent customer service HC!

1 comment. Reply..

Overall Rating		Alex Puente Secanella likes
Value	UNRATED
Quality	UNRATED

5 thumbs up!

Gran motor, con muchisima fuerza.
Lo estoy utilizando para un Acormaster y va genial. 100pcntrecomendado

No comments. Reply..

Overall Rating		ROGER G likes
Value	UNRATED
Quality	UNRATED

3 thumbs up!

I USED THESE IN THE SHARK COROPLAST WING AND IT REALLY ZOOMS. USED A 9X6 AERONAUT PROP WITH THE HXT 36A ESC. RUNS FAST WITH A 2100mah 11.1V 15C 3S

No comments. Reply..

Overall Rating		Bodoegutt 15 likes
Value	UNRATED
Quality	UNRATED

3 thumbs up!

Awesome motor for a great prize! Installed it on my Mini Ultra Stick, using a 35a Esc,2200mah 11.1v 20c batt. The model was airborne in 3 feet an accelerated vertically like a rocket!! WOW....
However, with a 35a Esc, and a 10x5 prop, i started to get control problems at full power. Not sure how many amp's the motor pulled, but it was more than the Esc could handle. Using a turnigy 60a esc on it now, with no control problems.

No comments. Reply..

.....click here to see all reviews

KD 36-12M Brushless Outrunner 1370Kv

SpecificationsRPM / V (Kv)BatteryOperating Current (Amps)Peak Amps (15sec)Prop KA36-16M10503 Lipo223311?~5 KA36-12M13703 Lipo25359?~4.5 KDA36-M Shaft Size: ƒ³5.0mm?~20mm Motor Dimensions: ƒ³37.4mm?~36mm Weight: 116g PRODUCT ID: KDA36-12M

Specifications RPM / V (Kv) Battery Operating Current (Amps) Peak Amps (15sec) Prop

KA36-16M 1050 3 Lipo 22 33 11?~5

KA36-12M 1370 3 Lipo 25 35 9?~4.5

KDA36-M
Shaft Size: ƒ³5.0mm?~20mm
Motor Dimensions: ƒ³37.4mm?~36mm
Weight: 116g

PRODUCT ID: KDA36-12M