USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Hi Han, The FAZER "KOBRA" BUGGY has Front/Rear Φ*87mm ×* 32mm / Φ*87mm ×* 42mm, and these are Φ*110mm ×* 42mm. So they are to big for your "KOBRA". Good Luck..!! :)
Same size as the Slash 4X4 original BF Goodrich I had. The gum are much softer, the grip is good on mud and dirt terrain. They won't last long on tarmac especially if used with Lipos. Still it is a good deal.
This tires already pre-glued to the rims. It will be difficult for you to take the out the tires. But this tires/wheels set can be used on 1/10 SC as long as they are using 12mm hex. I'm currently using them on my AE SC10 4x4 and Savage XS.
Yes they're glued on really good. I've just tried. Got them rear on of my SC10 but won't fit my front which are like bananas. At least I can take off now :-)
Diâ*metro da roda: 110mm
Largura da roda é*: 41mm
Cansar lado aro diammeter: 61 milí*metros
Pneu aro de diâ*metro interno: 75mm
Pneu da jante, incluindo o interior do bordo é*: 82mm
Tire largura da jante é*: 41mm
Tamanho hub Hex: 12mm
Hi,
Does anyone know if these have been coming with better foam inside now? I have heard there have been batches without foam.
Wheels are ****py, but I quite like the tires!
That was just a date for when i ordered my spares. The identical wheel/tire combo that came stock on the car have driven to hell and back and the rears needed to be replaced due to treadwear.
What stops them fitting on the 1/16 with a hex adapter? Theres alot of room to spare and these are only a little bigger? Has anyone tried them Id like to get some too not sure on the rim offset tho.
BEWARE these are not straight 2.2 wheels, they are offset like the slash and other stadium trucks, it's actually 2.2 front bead and bigger on the rear (i think 3.2), so don't expect to buy these and put on different tires.
Spec: Wheel diameter: 110mm Wheel width is: 41mm Tire out side rim diammeter: 61mm Tire rim inner diameter: 75mm Tire rim inner including the edge is: 82mm Tire rim width is: 41mm Hex hub size: 12mm
I hope that this information was helpful you guys ..
This is not the best tire, but it's cheap! and I like it !
These tires I use on my ACME Trooper 1 / 10 and they are much softer than the original ones good and cheap upgrade and thay have a very good grip on asphalt and concrete!!!
Spec: Wheel diameter: 110mm Wheel width is: 41mm Tire out side rim diammeter: 61mm Tire rim inner diameter: 75mm Tire rim inner including the edge is: 82mm Tire rim width is: 41mm Hex hub size: 12mm
I hope that this information was helpful you guys ..
This is not the best tire, but it's cheap! and I like it !
These tires I use on my ACME Trooper 1 / 10 and they are much softer than the original ones good and cheap upgrade and thay have a very good grip on asphalt and concrete!!!
Hi tony_hobby Thank you:) Which Crawler do you have on your profile picture? Nice I'm looking for one and will soon buy one, wonder if Hobby King will come with a Crawler 1/8 scale...?
Spec: Wheel diameter: 110mm Wheel width is: 41mm Tire out side rim diammeter: 61mm Tire rim inner diameter: 75mm Tire rim inner including the edge is: 82mm Tire rim width is: 41mm Hex hub size: 12mm
I hope that this information was helpful you guys ..
This is not the best tire, but it's cheap! and I like it !
These tires I use on my ACME Trooper 1 / 10 and they are much softer than the original ones good and cheap upgrade and thay have a very good grip on asphalt and concrete!!!
Is for rear or front or is the same rear on front on th HK desert buggy ??
Customer Reviews
Overall Rating
Speed4Fun
278 likes
Value
Quality
Like it?
Spec: Wheel diameter: 110mm Wheel width is: 41mm Tire out side rim diammeter: 61mm Tire rim inner diameter: 75mm Tire rim inner including the edge is: 82mm Tire rim width is: 41mm Hex hub size: 12mm
I hope that this information was helpful you guys ..
This is not the best tire, but it's cheap! and I like it !
These tires I use on my ACME Trooper 1 / 10 and they are much softer than the original ones good and cheap upgrade and thay have a very good grip on asphalt and concrete!!!
5 comments. Reply..
Overall Rating
T3rry
147 likes
Value
Quality
Like it?
Great tire, the price sure is right, works great on my 1/16 revo, also have more i will use for 4x4 slash, and other applications, 0 offset means you can put this on almost any truck, i will buy more when they come back in stock
Those tyres are super soft.. Much softer than slash bf goodrich tyre.. Has alot of "meat", fits nice in front and the back of the slash 2wd with the standard body.
No comments. Reply..
Overall Rating
Steven
9 likes
Value
Quality
Like it?
I have had mixed results with these tires, the tire, itself is good and offers nice grip, the rims are a bit too flexible but that's not a big issue. The biggest issue I have with these is that the inner foam simply does not last, it disintegrates and once it does this, it throws the wheels way out of balance and then this causes increased wear on the drive cups. It's about half the price of a traxxas mounted pair but I'd question whether it even lasts half as long.
These fit the slash and trooper that I have. Great inexpensive tire. Are they as good as more expensive ones? Yes. I see nothing wrong with them on or off track.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
