Painted Body w/Decals - Turnigy TR-V7 1/16 Brushless Drift Car w/Carbon Chassis

 Rexy03 1061 points

This body is much smaller the the truck body

 Rexy03 1061 points

No, its too small

 cristian 9 points

I own the 1/14 (really a 1/16) ninco4rc rally it is....28 cmlong 16.5 cm wide And the distance between holes are...16 cm long 4cm wide I broken it, and im looking for another cheaper

 _Djony_ 85 points

When you are in Stoke

 Kristian 7 points

They are in stock now

 Vaclav 2 points

Hi, i try it as soon as the stock.

 Tressie 231 points

Hi danidani,

You obviously discovered, like I just did, how the 1/16th rally extreme body shatters like a cheap light bulb on the very first hit!

Take a plastic bag with you when you go racing, Guy's, as you'll want to gather-up all the little broken body fragments to tape back together.

Hahahahaha!

 Luftwaffe_Rommel 5 points

The clear body is too short for the rally extreme edition. should have looked at the dimesions of the chassis before buying. drift car 250 by 185 while rally is 300 something by 170 something. Nevertheless with a bit of molding and applying a plastic resin compound to extend body and give shape will sure make this body fit. though the body supports of rally car on the rear are too high so will take them off and drill new holes and put hollow carbon fiber tube with new pin holes with right height of new body. Hope this helps future buyers desperate to replace that cracked old rally body.

 wayne 11 points

Thanks for the heads up. I was gonna buy one to find out. Smashed my extreme body to pieces in a day of racing. Off to the hs to find a new one as hk dont have one to replace it with.

 _Djony_ 85 points

No