USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 2200mAhVoltage: 3S1P / 3 Cell / 11.1VDischarge: 45C Constant / 90C BurstWeight: 201g (including wire, plug & case)Dimensions: 112x36x26mmBalance Plug: JST-XHDischarge Plug: XT60 Suited to the following models: ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually doesnt exceed 60degCThickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.Higher capacity during heavy discharge. More than 90% at 100% C rate.Fast charge capable, up to 15C on some batteries.Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N2200.3S.45
On another note... I produce videos and animation. Check out some of my RC videos of our club down in South Florida http://www.youtube.com/watch?v=w_kauXpxEoo ... look at others here too under Chris Seiler videos ... Hey Hobby King! Your little war birds are the BEST!
If you wanted to you could go up in mah a bit if you wanted to, but I think this is the best cell count and C rating for use in the PZ series airplanes like the T-28. Another thing I have found is try using the three blade Corsiar prop from PZ. This will give you a little bit more bite in your vertical performance.
flying blade 450 3d and trex 450 with them for some time now and i can honestly say these are some of the best packs ive had yet, just dont drop them as the cover tends to crack aroung the edges as they all do.
can you trust them o Bell ya you can. i have a few packs for my rc boat that have over 50 runs in them no puff and hold voltage fine cant really beat it
these batteries are by far the best for the price. i have a couple that i have used and abused and they still pack a great punch and last almost like they are new. i would recommend these to any new or experienced flier!
I run these in my Blade 450 3D and they work great, head speed constant through the entire flight, does not fall off like other inexpensive lipos I have tried in the past, and literally cool to the touch when I am done flying. I highly recommend them and please let me know if you find anything close to this price that can compare to them.
Customer Reviews
Overall Rating
simchippy
9 likes
Value
Quality
Like it?
Bought 6 of these for 2 of my TREX450 Pros. One has a scorpion-8 motor and the other has the 450mx. I've only flown a couple packs so far as I am repairing one 450 and the other has a very twitchy 3gx that isn't dialed in yet and still a handful.
First the packs look good and fits the 450 nice. They have a 10c charging spec. I charged at 3c to take it easy at first and break them in.
Wow. By far the strongest packs I've ever owned for the 450 and a great match for the 450mx. Very powerful. I've owned TP, Zippy, flightmax Turngey and these are stronger. How long will they remain strong? I'm not sure but looking forward to finding out. I also want to try them in my Phase 3 F-16. It needs a real strong pack to launch. So far so good. Will report back after 50 or so flights.
No comments. Reply..
Overall Rating
Bixler13
30 likes
Value
Quality
Like it?
Great battery!!!! I love it... it has a 10c charge rate so no more long charge times... has 12 awg wires.. recommended for sure!!!
2 comments. Reply..
Overall Rating
Greg
1 likes
Value
Quality
Like it?
My 450 3D can fly in basic mode for 6 minutes with the batteries just barley getting warm to the touch. Can fully recharge in 20 minutes with out getting warm. Actual length (measurement A) is 103mm, not 112mm. I will be buying more.
No comments. Reply..
Overall Rating
chad
5 likes
Value
Quality
Like it?
I bought 3 of these for my t-rex 450 pro and let me tell you they have good power running 4000 headspeed 4.5 mins and dont even get warm great battery
Great pack... You will not find a better pack for the money, Beats pack i have that cost 3 times more. great punch and run time. The 10c charge rate is nice also.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
.jpg)
