Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 35C Discharge
> Batteries & Accessories > Turnigy nano-tech

  RATED:

Turnigy nano-tech 5000mah 3S 35~70C Lipo Pack (USA Warehouse)

Turnigy nano-tech 5000mah 3S 35~70C Lipo Pack (USA Warehouse)

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
 
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
 
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
 
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
 
Spec.
Capacity: 5000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 35C Constant / 70C Burst
Weight: 409g (including wire, plug & case)
Dimensions: 150x49x26mm
Balance Plug: JST-XH
Discharge Plug: 4mm Bullet-connector
 
 
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

 



PRODUCT ID: N5000.3S.35

Capacity(mAh) 5000
Config (s) 3
Discharge (c) 35
Weight (g) 409
Max Charge Rate (C) 8
Length-A(mm) 150
Height-B(mm) 49
Width-C(mm) 26
Update/Add my own data
Customer Data

Weight: 556g
Quantity: 
USA West Warehouse
stock
10+
USA East Warehouse In Stock View Item
International Warehouse In Stock View Item
Price $44.95

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
48
crowns
  
 
Total of 12 discussions.
John  1 points - 8/4/2014
 
Will these batteries fit in my E-REVO and will they give me the max proformance?
Forrest L  97 points - 1/11/2014
 
Great batteries. I tried the 4000mha and the 6000mha versions of this battery. These were the best all around. I'm getting 15 minutes of flight time on my 1500gr quadcopter with D2830 1000kv motors and Afro 30 amp esc's.
George  3 points - 9/20/2013
 
Sorry, I got that.
George  3 points - 9/20/2013
 
What size of connectors fit this battery leads? Thanks.
 Undermoose 2 points
It's 10 gauge wire so the banana plugs work that come with it, EC5, XT90 or larger, 5mm bullets or larger, etc. Larger wire needs bigger connectors.
LonnieDupont  28 points - 9/9/2013
 
Anyone know if I can change to xt60 connector
 Thebush121 7 points
You can change solder on an xt60 connector. I have done it with a couple of my batteries, just make sure you do one connector at a time.
BEST ANSWER CREDIT AWARDED
 Undermoose 2 points
This battery came with 10gauge wire so XT60 isn't a great choice for it, but I could see it being made to work... I de-soldered the banana plug and opted for EC5. I'd suggest XT90 if you like that connector style.
Customer Reviews
Overall Rating
Joshua
11 likes
Value
Quality
Like it?
They are great batteries. When i first plugged in one of my batteries to charged it the cells were off but after 3-4 balance charges the battery was fine. I use these in my 1/10 erevo and they are GREAT!!! They fit in it perfect. I would buy these again if i need more 3s batteries for it in the future.


No comments. Reply..

Overall Rating
ogger74
7 likes
Value
Quality
Like it?
I used two in my e-maxx and I am not dissapointed thay have ample power the only I am carefull to watch them


No comments. Reply..

Overall Rating
ogger74
7 likes
Value
Quality
Like it?
I orderd two of theas for my E-MAXX and it flyes I reccumend this for the money it's worth it.
The bad news is thay swell a little I dont think thay are suppost to do that.


No comments. Reply..

Create an account
Overall Rating
archd7
36 likes
Value
Quality
Like it?
awesome battery!!! great quality. great discharge rate as well as balanced cells on arrival


No comments. Reply..

Overall Rating
Luke
1 likes
Value
Quality
Like it?
Really good. Using this in a brushless powered rustler. Just dont drain the lipo to low, it will damage it beyond repair. Set your LVD on your esc to a high value, its not worth pushing the batterys too low.


No comments. Reply..

.....click here to see all reviews
Aff. Link