Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Sale/Liquidation > Liquidation Items
> Batteries & Accessories > 25C Discharge
> Batteries & Accessories > Turnigy nano-tech

  RATED:

Turnigy nano-tech 5000mah 10S 25~50C Lipo Pack (USA Warehouse)

Turnigy nano-tech 5000mah 10S 25~50C Lipo Pack (USA Warehouse)
Turnigy nano-tech 5000mah 10S 25~50C Lipo Pack (USA Warehouse)

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
 
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!


Spec.
Capacity: 5000mAh
Voltage: 10S1P / 10 Cell / 37V
Discharge: 25C Constant / 50C Burst
Weight: 1305g (including wire, plug & case)
Dimensions: 305x53x42mm
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector

Suited to the following models: MIKADO LOGO600/600SE, HENSELEIT TDR, MA Furion 6

* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.


PRODUCT ID: N5000.10S.25

Capacity(mAh) 5000
Config (s) 10
Discharge (c) 25
Weight (g) 1305
Max Charge Rate (C) 10
Length-A(mm) 305
Height-B(mm) 53
Width-C(mm) 42
Update/Add my own data
Customer Data

Weight: 1473g Quantity: 
USA West Warehouse
stock
10+
Price $119.34

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated 0 crown   
 
Total of 4 discussions.
Akexander  2812 points - 3/15/2014
 
Quick unboxing
Ari  2 points - 9/25/2012
 
who need 10s!!!!!!!!????? the jeremy clarkson of rc?
 Gerardo 7 points
Not to mention: How do you charge 10 cells, non of the chargers I have (or know) will do...
Greenfuelboy  171 points - 6/5/2012
 
Does any body know if I can split these packs apart from each other and put them side by side. I wanted to buy two five cell packs but they are out of stock.
 Greenfuelboy 171 points
Yes you can split them. I just split these packs apart and used them side by side.
 tommy2toes 2709 points
how hard is it to split them? is that dangerous?
 Greenfuelboy 171 points
I cut the shrink wrap off. The battery has two sets of leads and balance plugs coming out. The out side of the battery has plastic taped to it. Just peel it off and the battery comes apart in two parts no soldering is needed. I purchased shrink wrap to wrap the two packs.
 tommy2toes 2709 points
thanks i need some i will try it as i just paid that for one.
Flux it  6 points - 12/3/2011
 
I'd like to use this battery with KB45-17XL 700kv Brushless Inrunner and Sentilon 100A HV. Will it be O.K. or do I need a higher C rating?
 Damroadhog 14 points
YES
5000 MAH* 25c = 5amps x 25c = 125amps with 250 amp burst.
1000ma = 1 amp x that buy c rating in this case 25c. 1000ma or 1 amp x 25 = 25amps, get it?
Customer Reviews
There are currently no reviews for this product.
Be the first to review it by clicking the link above!
Aff. Link