Corona DS538HV Digital Metal Gear Servo 8kg/ 58g/ 0.12 Sec

Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > X-Large Servo 50g+

RATED:


	Corona DS538HV Digital Metal Gear Servo 8kg/ 58g/ 0.12 Sec

Corona DS538HV Digital Metal Gear Servo 8kg/ 58g/ 0.12 Sec

Corona DS538HV Digital Metal Gear Servo 8kg/ 58g/ 0.12sec

Model: DS538HV
Operating Voltage: 6.0V / 7.4V
Operating Current: 300mA / 400mA
Operating Speed: 0.13sec.60º/ 0.12sec.60º
Stall Torque: 7kg.cm / 8kg.cm
Size: 20X40X38.5mm
Weight: 58g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR106
Gear: Metal
Connector wire: 300mm
Operating Temperature Range: -20c+60c

PRODUCT ID: 014000002

This product available from a warehouse near you!

Weight (g)	58
Torque (kg)	8
Speed (Sec/60deg)	0.12
A(mm)	43
B(mm)	40
C(mm)	40
D(mm)	20
E(mm)	53
F(mm)	27

Update/Add my own data
Customer Data

86g

10+

$10.27

Further discounts available for registered & logged-in customers.

Customer rated

4 crowns

Total of 3 discussions.

Hellipower

13 points - 1/20/2013

Is it ok to use this servo on HK550?

Cedric

5 points - 12/5/2012

Ré*approvisionnement pré*vu ???

JOSE ROBERTO

1 points - 9/17/2012

será* que serve em um modelo hk 550?

Noisy360

13 points

Don't do it! I used them in a HK600 and they were too slow and weak! Use either these: HD-1209TH or these :HK47011DMG it is worth spending the extra money.

Customer Reviews

Overall Rating		volrcr 47 likes
Value
Quality

Like it?

Bought 5 of these from HK. I have only bench tested them so far at 7.4V (2s lipo). All 5 seem to work fine, very fast, strong and precise. They center very well and are fairly quiet with no loud buzzing like some other digital servos. I opened one up and construction looks to be first rate with gears well greased. These servos also come with a nice hardware package. Some of their earlier servos were problematic but Corona seems to have finally gotten its quality control act together. This DS538HV is an excellent servo at a great price and I highly recommend it.

3 comments. Reply..

Create an account

Overall Rating		buzzbomb 1 likes
Value
Quality

Like it?

I'm going to use these to replace a couple of Hitec 311s which have been really disappoinging. These have great specs on paper and should be a great replacement

No comments. Reply..

Overall Rating		4/8/2013 Geoffrey 1 likes
Value
Quality

Like it?

Used as a rudder servo in a 46-55 sized Extra sports plane (2S lipo). Only had about two hours flying on it so cannot report on longevity yet. First impressions are good though, good speed, torque and centring. I do plenty of rudder work (knife edges etc.) with the power on. If it lasts, then it's hard to imagine a better servo at this price.

No comments. Reply..

.....click here to see all reviews