hacker Style Brushless Outrunner 20-20L

Item found in the following categories;
> Electric Motors > KDA Outrunners

RATED:


	hacker Style Brushless Outrunner 20-20L

Dimentions: 28x32mm
Rating: 1053kv
Battery Config: 3 Lipo Cells
Shaft: 3.175mm
Weight: 56gr
Standard Current: 6-15A
Max Current: 19A

*Note.
Factory no longer includes colet shaft adapter, converse to what is shown in the image.

PRODUCT ID: KDA20-20L

Kv (rpm/v)	1050
Weight (g)	56
Max Current (A)	19
Resistance (mh)	0
Max Voltage (V)	11
Power(W)	0
Shaft A (mm)	-
Length B (mm)	32
Diameter C (mm)	28
Can Length D (mm)	17
Total Length E (mm)	47

Update/Add my own data
Customer Data

107g

-1

$13.70

Further discounts available for registered & logged-in customers.

STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;

Stock usually arrives every 10-25 days.

Customer rated

5197
crowns

Total of 18 discussions.

edwin46

104 points - 10/5/2011

Does anyone know where can i find replacement bearings for this motor?

roberted5

104 points

Better off buying another motor unless you plan to rewind it also.
Boca bearings has a very good reputation.

Shurics

144 points - 9/16/2011

is this keda motor?

sedat

8 points

yes this keda

Hansc

374 points

well spotted

druckgott

8 points - 9/3/2011

I´*m waiting for over a month that the motors come back in stock. Do anybody can tell me a alternative to this motors. I need it for a copter and already have 4x 30 amp Motors. The price should also around this prise 1 or 2 $ more it´*s ok.

srepfler

1148 points

back in stock!

Bahamo

11 points - 9/13/2010

I bought two of these motors and both of them stopped suddenly in the air after 5 minutes without any reason. The motor didnt get warm and i tried with different speed controllers. Prop was 9x6 and lipo was 3 cells 25c from zippy. If i reconnect the batterie with the speed controller the motor runs again but just for 1-2 miutes. Any ideas what im doing wrong?

dubaudio

12 points

What Mah rating is your battery ? On a 1000 Mah Battery you can only expect about 5min time , good motor very smooth & powerful, but * 15 amps flight times may be shorter if you are upgrading for more power . Sounds like normal operation or maybe dying battery. Upgrade your battery or charger perhaps ?

jordicamu

12 points - 8/25/2010

3x8x3.5 BEARINGS?
Hi all,
Does somebody knows where i can find spare bearings for this motors?
I will appreciate a positive answer.
Good flights to all.

__AlFu

38 points

I've got my spare bearings at a hardware shop for industrial standard parts.

beanrider

67 points - 7/13/2010

Hy folks,
i run this engine with a 3S and a 10x4.7 APC in normal conditions in a foamy parkflyer. 5-10 flights and the motor begun to stutter. Reason 4 that is, after i tried to analyse this, that the used solder of the wiring looses connection. So that's ***r ***r quality today. With others i bought months before i had not that problems and i was satisfied. Maybe the cheaper they go, the worse they become or the manufacturer has a real quality problem.

Hansc

374 points

Hi thanks for your review. Put this in the review section though so people can read it. You even get points for that. Now you can only give me points for pointing that out to you *-).

dukepapas

20 points - 5/7/2010

Where can I find a spare shaft for this motor ?

spirit7

100 points

first this motor comes with 1 spare shaft,second you can find all motor accessoris pack in this web www.link luck

dukepapas

20 points

I think the correct shaft is www.link

Dan

26 points

www.link

2walla

33 points

McMaster Carr- you can order the metric piano wire and make your own...

Emilio

49 points

it's is in the box

ravidguy

27 points - 4/16/2010

Where can I find a spare shaft for this motor ?

dukepapas

20 points

www.link

Dan

26 points

www.link

rajeev

12 points - 3/8/2010

I am thinking of buying this motor. Can HC please answer my queries:
1. What accessories are included with this motor?
2. How to reverse the shaft on this motor?

spirit7

100 points

hi you can find all the accessories in this web www.link luck

Emilio

49 points

it's include shaft adapter, connector gold and safe spinner, the shaft not invert

-Redsands-

1232 points - 11/12/2009

I got one of these and it runs like a dog on a 3 cell lipo.. I tested other motors with the ESC and battery and its the motor, really really slow and no power. Connected to Watts up and it draws a total of 0.8A at full throttle with a 40A ESC..
Am I missing something or is this just a dud?

Luiz Fernando

15 points

Looks like you got a bad unit. Ive had 4 or 5 of these motors and they all worked as specified. This motor is a blast on my Formosa with a TGS 8x7 prop.

Buddy31

14 points - 9/9/2009

I have just bought this motor to replace the brushed motor on my Sig EP42. Do you know of a stock motor mount to bolt directly to the firewall.

Buddy31

14 points

I made a motor mount out of 3/16" lite ply. Now to see if it will fly.

Buddy31

14 points

The motor mount works great and the motor runs very good but the prop adapter is no good. ***r metal and the threads stripped when I tightened the prop.

saltbush

160 points - 6/1/2009

Hi - can anybody tell me the dimensions of the motor (not the shaft) please? cheers.

Sebastien

25 points

Hello ,
dimensions are:
diameter 28mm X length 28mm + 5mm(small part) + shaft

Seb

Baldwin62

12 points - 4/13/2009

Hi
Is it possible to use this motor on a CAP 232 from 930mm wing span and 800mm lenght? I suppose you have to use then a 9X6 prop but is it powerful enough?

Grtz

Dan

26 points

I run a 10x4.7 on it and get static 220watts..pulls 19 amps..

sonierm

16 points -

Hi, I am looking for a replacement prop adapter for this motor, the one that attaches via 4 screws. Is this product carried by hobby king? If so could somebody send me a link?

Beaufighter

1808 points

Here you www.link

Beaufighter

1808 points

as the former was mangled...

Beaufighter

1808 points

Arrgh... That was mangled too, sorry... Try searching for "accessory" and you'll find it:)

sonierm

16 points

thanks:)

Buddy31

14 points

I cannot find this prop adapter either. The one that came with my motor was not very good material and the threads stripped when I tightened the prop. I need one too

Buddy31

14 points

I looked under all kinds of accessories and cannot find it.

Kevin

12 points

Very easy to find* In your address field in your browser (IE, firefox) the last bit of URL in the line says ?idproduct=2048 (or whatever number.) simply delete the number and change to 7198 which is the product number of the KDA A20-**M motor accessory Pack.

Dan

26 points

www.link

GunnyVH46

137 points -

I intend to buy two of these for my "Protech Voyager", a foam twin-motor plane which looks like a twin star, 140cm wingspan. What ESC's should I buy ?

T.rex.450

175 points

I use this motor with the Turnigy Plush 25A ESC and it works wery good with this motor.

bothal3

2055 points -

Please state what is included or update picture. Thank you.

ravidguy

27 points

Where can i find a spare shaft for this motor ?

ssmyth

16 points -

hi can you tell me the diameter for this motor please.
Steff

webber

1614 points

If you meant the diameter of the axel - it is 3,175mm
The diameter of the opposite mounting device seems to be about5mm - I drill holes in GWS and other props to fit them.

dmarlin

15 points -

I was wondering if I can buy parts for this motor...specifically the X mount adapter on the back and the prop adapter on the front.Thanks

Dan

26 points

www.link

Customer Reviews

Overall Rating		PeterDen 71 likes
Value	UNRATED
Quality	UNRATED

22 thumbs up!

Sorry to say, but motor failed me on third fligth, in full fligth started to grind and stopped.
Does not run anymore: up to then it was ok must have been one bad puppy, but still.... not happy.

1 comment. Reply..

Overall Rating		prabbetts 18 likes
Value	UNRATED
Quality	UNRATED

10 thumbs up!

Ran ok plenty of power, however once warmed up on full throttle the motor jams violently until you back off! So will stick to an emax 2215 20 from now on

No comments. Reply..

Overall Rating		beanrider 42 likes
Value	UNRATED
Quality	UNRATED

9 thumbs up!

Run this engine with a 3S and a 10x4.7 APC in normal conditions in a foamy parkflyer. 5-10 flights and the motor begun to stutter. Reason 4 that is, after i tried to analyse this, that the used solder of the wiring looses connection. So that's poor poor quality today.
Had this with 2 of the last bought one, with others before i had not that problems. Maybe the cheaper they go, the worse they become or the manufacturer has a quality problem.

1 comment. Reply..

Overall Rating		Customer 15 likes
Value	UNRATED
Quality	UNRATED

8 thumbs up!

Motor is broken out of box. Hooked it up to my ESC and it shutters and shakes and gets extremely hot. Motor will rotate freely by hand and seems to be in good condition.....oh well must have gotten a dud!

No comments. Reply..

Overall Rating		leiff 63 likes
Value	UNRATED
Quality	UNRATED

8 thumbs up!

Did fine for a couple af months on a 9x4.7 APCe
at 120w, then I tryed a 9x6 APCe at 145w the moter burned and took the esc out too, It was suppose to do 190w.It is far to short of its supposed limit.

No comments. Reply..

.....click here to see all reviews

hacker Style Brushless Outrunner 20-20L

Dimentions: 28x32mmRating: 1053kvBattery Config: 3 Lipo CellsShaft: 3.175mmWeight: 56grStandard Current: 6-15AMax Current: 19A *Note.Factory no longer includes colet shaft adapter, converse to what is shown in the image. PRODUCT ID: KDA20-20L

Dimentions: 28x32mm
Rating: 1053kv
Battery Config: 3 Lipo Cells
Shaft: 3.175mm
Weight: 56gr
Standard Current: 6-15A
Max Current: 19A

*Note.
Factory no longer includes colet shaft adapter, converse to what is shown in the image.

PRODUCT ID: KDA20-20L