USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
I bought 5 items.(NL store-REGION)..one of them was defective in..I wrote MESSAGE and video sent..Replies in 4 days...HOBBYKING need to inquire a little more quality...
I've been using these on the pro with FBL ebar. Works great with supplied rubber/brass inserts.Gives better alignment (vertical) with swash plate.Its the aim of the game. 2 inverted crash,bent shaft,snap blades,servos still good.Got extras as these are awesome for the price.
It will do 250hz from my reading, and will test 333hz myself when my next shipment arrives with spares. Don't want to risk damage to the ones currently installed...
That means that from centered (or 1500us signal from your radio) a decrease/increase of 400us will produce a 40 degree change in servo position in one direction. Not a very useful bit of info until you start looking at 360 degree travel servo's.
I want to use this on my 450GT as tail servoc in combination with the ZYX 3 axis fbl system.
What will I have to set in the ZYX for the speed (1520us or 960us or 760us)?
Servo's arrived boxed up and with all the accessory's, there is a good length of wire and the lead is of good quality. The case is made of plastic and is typical of a servo casing. The servo worked well and tested well on my servo tester. There was good torque even at 4.8v. The gears are metal and there is minimal slop in the gear train. I would consider this level of slop to be negligible and would not effect performance of the servo, surprisingly most of the slop was taken up when the servo was powered up.I am very happy with the product and would buy more in the future, especially at this price. These are going in a 450 heli for cyclic use.
No comments. Reply..
Overall Rating
Christo
11 likes
Value
Quality
Like it?
These servo's exhibit greater amounts of gear slop over time. More suitable for aircraft that do not require long servo horns which will amplify the amount of slop.
Super Servo ! Funktioniert enwandfrei mit 2 Lipos.Sehr kräftig und die Geschwindigkeit ist auch OK.kann das Servo nur weiter empfehlen !
No comments. Reply..
Overall Rating
Yeswecan
146 likes
Value
Quality
Like it?
Great servos for the price.2 crashes,1st;bent shaft,shattered blades,2nd servo arms snapped, they still work with nil gear "slop".Works great with Ebar also.Bought 9,6 are still spares. "Happy as Larry" with these.Highly recommend to new heli pilots.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
