More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 5000mAhVoltage: 5S1P / 5 Cell / 18.5VDischarge: 65C Constant / 130C BurstWeight: 712g (including wire, plug & case)Dimensions: 154 x 49 x 46mmBalance Plug: JST-XHDischarge Plug: HXT-4mm *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge capable, up to 15C on some batteries.-Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N5000.5S.65
I recommend the Turnigy MEGA 400Wx2 Battery Charger/Discharger (800W) and the Turnigy 1200W power supply. You'll be able to charge both batteries at the same time in under 20 minutes at the maximum current per channel.
es sind 4mm Goldstecker, die passen, bei mir in etwa bei 15 Akkus. Gruß* Mathias
I purchased two of these for my HPI Vorza. They both run equally well and just fit into the battery tray without any need for modification. The power delivery seems consistent and only starts to tame down just before ESC cut-off which I have set to 3.2v per cell. I balance charge them every charge (1C or 2C) on a Hyperion 1420i Net3 and they run very cool and have never puffed. The only downside is they are bigger and heavier when compared to some of the competitors Lipos and the 10 gauge power wires are too thick which makes them a nightmare to solder onto deans connectors. 12GA would have been perfect. For those reasons they lose a point on my score however overall I recommend these as a reliable and high performing Lipo product.