Hobbyking S5040D X/Large Digital Titanium Gear Servo (HV) 177g / 0.18s / 39.8kg

Total of 11 discussions.

Silvino

1 points - 4/25/2013

Hello, I want to know how much I'd pay for shipping to this zip code 40296250, Brazil Thanks for the attention

Catalin

5 points - 4/10/2013

Is it possible to run directly from 2S Lipo without BEC? Thank you

kevin

1 points

Theres a video on youtube that shows a xq power servo running off a 2s lipo so I think it will be ok. Are you using a gas 1/5th scale rc and want 2s for the servo and radio or are you using a small electric model as this is a extra large servo mate.

Catalin

5 points

I'm using a 1/8 rock crawler powered by 2s lipo. It needs massive torque for steering. Thanks

kevin

1 points - 2/28/2013

These servos are supposed to have xo power printed on the case ive ordrrd one because the bottom comment said it comes with genuine packaging but can anyone else confirm this please. I hope its real or its coming straight back one chance hobbyking one chance. Please prove other people wrong.

3Dscalepilot

14 points - 2/28/2013

will these work on a 100cc aircraft?

kevin

1 points

I would imagine so for rudder but be careful because the servo horn is a funny size and if you have to use a double arm horn its plastic the metal horn is metal and I cant find a replacement horn anywhere. Overall im very impressed with this servo and if I can find spare horns im buying more xo servos especially the s4030. Happy flying mate.

adam

1 points - 12/19/2012

does any one know if there's any servo arms that fit on this and longer than the original arm?
i had one aluminium one but the teeth of it has been messed up

adam

1 points - 12/16/2012

do you carry any servo arms that's compatible with this servo?

wixl.

3 points - 9/19/2012

Does the servo perform according to the specs. ? My servo can only drag about 22-23kg/cm and also it consumes much current. I think 22-23kg/cm is way to low for a servo that has specs. that it will drag 39.8 kg/cm. I could have manage a 10% power loss but almost 45% power loss is not tolerable!

ThatNinthGuy

9 points - 8/8/2012

How many milliAmps does it pull?

Kyuubi

14 points

by the looks of it about twice that of the metal gear one (33 kgcm). ordered mine recently can't say more before testing

wixl.

3 points

Stall current should be 2100mA(6V)/2550mA(7.2V)

Alex_EXE

17 points - 5/19/2012

What is the angle of rotation of the shaft in this servo?

Alex_EXE

17 points - 5/17/2012

Tell me, if this deal with the servo control of robot manipulator? The manipulator consists of two tribes of 0.5 meters, the weight of 1.5-2 kg arm, servo mount on the ends of sticks to keep the load takes a long time.

david

9 points - 12/12/2011

What type of servo horn fits this servo.

omen75

15 points

JR 23T

Janis K.

4 points

Received XQ-Power S5040D servo in original XQ-Power package, horn like in picture metal horn.

Customer Reviews

Overall Rating		Kobus 3 likes
Value
Quality

Like it?

Ek het hierdie servo op 'n 100cc Sbach se rudder. Hy werk 100pcnt. Is vinnig genoeg vir 3D vlieg. Sal hom enige tyd aanbeveel. Is 'n bargain vir hierdie prys.

No comments. Reply..

Overall Rating		mkenm 6 likes
Value
Quality

Like it?

Worked for about five minutes. Took it a part, one screw for the motor was gone the other was loose. It did work after puting the screws back in.

No comments. Reply..

Overall Rating		Janis K. 3 likes
Value
Quality

Like it?

Strong and fast servo, best i have used on baja 5b steering. But for baja 5b use, main shaft bearing seat between pinion and pot is to weak, broke off, some other trackmate broke this too. Managed to repair with some small steel tubes and superglue (should be done before use). Anyway for price wery good servo.

1 comment. Reply..

Create an account

Overall Rating		2 likes
Value
Quality

Like it?

???????? ?? ?????????? 1:5. ??? ???????? ???????. ???????? ?? ??????.

No comments. Reply..

.....click here to see all reviews