XK2860-B-5050KV Brushless Inrunner

 robi38 26 points

This motor is way too powerfull for this boat ! Try a 28-50 (with approx 4500~5000 kv), it's enough. Take a 2s battery pack (1600~2200 mAh Turnigy nano-tech 35C ) with Turnigy Marine 60A ESC, 32 mm metal propeller (for 3 mm shaft), a coupling with the same diameter that your centurion drive system in the flex drive side and 3 mm for the motor side (because i think that the original motor of your boat has a 2mm shaft...) if you take a motor with 3 mm shaft, like the Turnigy of Hobbyking *)

 emanuel 669 points

yes you can use it for 3sor 11.1 v

 helari 17 points

I dont recomend if you dont want to prake it.

 nottings 2233 points

The length might be too big

 Victorvs 952 points

they must be very strong

 emanuel 669 points

The max voltage is 3 s

 oswaldo 268 points

120A Max..

 The mad one 53 points

no is only for 2s

 emanuel 669 points

no is only for 2s

 dr. Lex 94 points

yes it would be a cheap and good motor for pyloning. 2 or 3 cells recomended, small props and and whooooooozzzzziiii

 Steve 11 points

can these bearings handle 56,000 rpm at 11.1v? thinking of using in your Viper EDF

 Freeride 64 points

These bearings and the rotor can only take 50000prm maximum like the leopard ones. better below

 Jim 1 points

Wiil this be a good motor for a sc10 4x4