Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > Turnigy Servo
> Servos & Parts > Mini Servo 11-20g


Turnigy TGY-9018MG Metal Gear Servo 2.5kg/13g/0.10

Turnigy TGY-9018MG Metal Gear Servo 2.5kg/13g/0.10
Turnigy TGY-9018MG Metal Gear Servo 2.5kg/13g/0.10

Turnigy TGY-9018MG Metal Gear Servo 2.5kg/ 13g/ 0.10sec

Model: TGY-9018MG
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 250mA
Operating Speed: 0.12sec.60º/ 0.10sec.60º
Stall Torque: /
Size: 23X12.1X25.8mm
Weight: 13g
Dead Band: ≤7uSec
Operating Travel: 60º +/- 10º
Potentiometer: indirect Drive
Ball bearing: Top Ball Bearing
Gear: Metal
Connector wire: 180mm 26AWG
Plug: JR/Universal
Operating Temperature Range: -20c+60c


This product available from a warehouse near you!

Weight (g) 13
Torque (kg) 2.5
Speed(Sec/60deg) 0.1
A(mm) 32
B(mm) 23
C(mm) 29
D(mm) 12
E(mm) 32
F(mm) 19
Update/Add my own data
Customer Data

Weight: 31g
International Warehouse
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price  $5.35

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
Total of 56 discussions.
Brian  2 points - 4/18/2015
Avoid this servo if you're looking for an ALL metal gear servo, because this one is not. I've only been using this servo for a week now on my Trifecta, and I've somehow managed to strip the gear. At first I though I must have really done some serious damage, because this thing is called a "Metal Gear Servo", right? Well, sure enough, the first gear from the motor is PLASTIC, not metal. I guess a week's worth of flying is $5 worth of my time. Not going to order another one, though. Here's a pic of the internals as proof: *******i.IMG width='480px'ur****/a7CaP1H.jpg
 Brian 2 points
I guess HK doesn't like people posting links to imgr in comments ...
 Adam Dube 234 points
HK hates any link just space it out like **** imge /myphoto **** /test
 Adam Dube 234 points
that way you only lose the w w w . and the . c o m
 Richard 7 points
hi brain i also have the same problem on my trifecta . what servo are you going to use ?? i just got a ful metal servo but the to gear is too small for the gear that comes with the trfecta ??
 Brian 2 points
I'm using the MG90S from Adafruit now. It works perfectly with the Trifecta and is ALL metal gear.
Michael  114 points - 2/19/2015
Hi there. This servo is not a metal gear server. I bought two of these and one stripped also straight away. So I opened it and guess what the main gear off the motor is plastic. Sure the rest of the gears are metal but whats the point if there is a plastic gear in there.
 n-nike 108 points
You are right.Only some gears are metal.
Mike  1 points - 1/30/2015
Is this a Digital or Analog Servo? I am assuming Analog.
 Mike 1 points
found the answer in earlier discussion...
 n-nike 108 points
These are analog.
nissan  18 points - 1/5/2015
It fit monster beatle 1/16
 Mark 1 points
Yes and no. I just installed two in my Losi MMB. I had to drill holes in the mounting ears of the servos to line up with the factory mounting holes. Then I had to space off the back ends of the servo to keep them level. Then I had to modify the two-way arms to work with the balls and linkage for the MMB, because the servo savers won't fit. Then I had to trim the frame to keep the turnbuckles from interfering. And after all that, it still tore out the one plastic gear in one servo. I might try again with this one. I may just order a handful and swap them out as they break.
kolomus  2 points - 12/5/2014
Something is wrong ... The 9018 have 2.5kg and the 9025 have 1.8kg in the discreption. .... What is right and what is wrong?
 Mr.Bbbbb 23 points
The product spec here is correct. 9018 have 2.5kg and the 9025 have 1.8kg
Customer Reviews
Create an account
Overall Rating
Like it?
very good servos for my edge 540

No comments. Reply..

Create an account
Overall Rating
RC Lancelot
Like it?
Free item for xmas purchase!! :) I don't know where I'm going to use it. But looks twice beautiful since it's free and metal gear! yeah. Thanks HK!

No comments. Reply..

Overall Rating
Like it?
Simply an amazing servo. Nice alternative for hs-81 type. Great for planes up to 1.30m. I will order more once at stock. For t His price you can have them on the selve!

No comments. Reply..

Create an account
Overall Rating
Like it?
Got these as a Christmas freebie but they are great, strong and quite fast. Put them in a foamie and they perform great.

No comments. Reply..

Create an account
Overall Rating
Like it?
They work, center well, quiet, no jitter.

No comments. Reply.. here to see all reviews
Aff. Link