Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 15C Discharge
> Batteries & Accessories > Airsoft Batteries
> Airsoft & Accessories > Lipoly Batteries


Turnigy nano-tech 2000mah 3S 15~25C Lipo AIRSOFT Pack

Turnigy nano-tech 2000mah 3S 15~25C Lipo AIRSOFT Pack

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Capacity: 2000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 155g (including wire, plug & case)
Dimensions: 126x21x29mm 
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex) 

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*Note: The length of Balance charging wire may vary


Capacity(mAh) 2000
Config (s) 3
Discharge (c) 15
Weight (g) 155
Max Charge Rate (C) 5
Length-A(mm) 126
Height-B(mm) 21
Width-C(mm) 29
Update/Add my own data
Customer Data

Shipped from:
International Warehouse



  • Male Mini Tamiya/AR Drone/Airsoft to Female XT60 (3pcs/bag)

    Combo Price: $1.58   IN STOCK
    Add to Cart

  • Graphene Velcro Battery Strap 200mm

    Combo Price: $2.22   BACKORDER
    Add to Cart

  • MultiStar Velcro Battery Strap 300mm

    Combo Price: $1.81   BACKORDER
    Add to Cart

  • MultiStar Velcro Battery Strap 200mm

    Combo Price: $1.68   BACKORDER
    Add to Cart

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 5 discussions.
Artem  7 points - 5/7/2013
The G36K from Ares/Umarex fits it perfectly! About 6k bb per one charge (130 m/s)
Jorge  1 points - 12/28/2012
Would this fit on the stock of my m4? If not, which would it fit? I would like a 11.1v lipo battery.
 Edwin Jonathan 16 points
It will not fit. The item below will fit. Turnigy nano-tech 2000mah 3S 15~25C Lipo AIRSOFT
Peter  1 points - 11/13/2012
Fit this battery under AK receiver cover ?
 Francico Jose 1 points
Is too large, I recommend this
 Francico Jose 1 points
No link? ok... the battery that recommend is this.. Turnigy nano-tech 1200mah 3S 15~25C Lipo AIRSOFT Pack
Luke  1 points - 10/29/2012
Will this fit in a normal Airsoft buffer tube? Thanks, Kolk
 Francico Jose 1 points
No, is too large for a buffer tube of M4
Corleone  124 points - 9/2/2011
What's the real length for this battery pack?
 variedades 19 points
The size informed by Hobbyking
 Kyle 1 points
Does anyone know if this will fit into the handguard of an M4 airsoft gun? Thanks! :)
 Corleone 124 points
I'm guessing no. You might wanna try out the nunchuck-version to be sure it'll fit an M4 handguard.
 T6Texanaus 348 points
including the wires as they come out of the pack - 130mm
 __Jawz 28 points
*Kyle: No, it won't fit into the M4 handguard because it is be too thick! The 11.1V 1400mAh version is the absolute borderline, although it depends on what kind of M4 brand you have. Some M4 handguards offer a tad more space than others!!!
Customer Reviews
Overall Rating
Like it?
ottima batteria ma non entra assolutamente in un calcio crane ************ excellent battery but does not enter completely into a crane stock, very bad...

3 comments. Reply..

Overall Rating
Like it?
Confermo !!! Ottima batteria ma non entra in nessun calcio crane !! I confirm !Excellent battery but does not enter completely into a crane stock !

4 comments. Reply..

Create an account
Overall Rating
Like it?
Very good product. I purchase one for the Bixler it have a lot of flights and runs perfect. Now ordered another one. Recommend!

No comments. Reply..

Overall Rating
Like it?
This Battery I Awesome fits perfect in my hand guard of my M4 and the battery last all day and then some..

1 comment. Reply..

Create an account
Overall Rating
Like it?
OK first up NOWHERE in the product description does it say "For Airsoft Crane". I bought a pair for an E-glider conversion based on the listed specs. Mine required 1A recharge on arrival.
Specs 130mm L x 20-22mm x 30mm.
That length is including the wires as they protrude from the pack. I replaced the connector to EC3 with ease as the wire readily tinned (far better than the silicon wire sold here. The Balance plug is heavier gauge wire than on say the Flight max packs but is silicone.

No comments. Reply.. here to see all reviews
Aff. Link