Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > Airsoft Batteries
> Airsoft & Accessories > Lipoly Batteries


Turnigy nano-tech 1400mah 3S 15~25C Lipo AIRSOFT Pack

Turnigy nano-tech 1400mah 3S 15~25C Lipo AIRSOFT Pack

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Capacity: 1400mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 115g (including wire, plug & case)
Dimensions: 128x7x20mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.

 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

*The length of balance charging wire may vary


Capacity(mAh) 1400
Config (s) 3
Discharge (c) 15
Weight (g) 115
Max Charge Rate (C) 5
Length-A(mm) 128
Height-B(mm) 20
Width-C(mm) 7
Update/Add my own data
Customer Data

Shipped from:
International Warehouse



  • Mini Tamiya Connector Male (10pcs/bag)

    Combo Price: $1.34   BACKORDER
    Add to Cart

  • Turnigy Accucel-6 50W 6A Balancer/Charger w/ Accessories

    Combo Price: $22.95   BACKORDER
    Add to Cart

  • Mini Tamiya Female Connector (10pcs/set)

    Combo Price: $1.31   IN STOCK
    Add to Cart

  • Male Mini Tamiya/AR Drone/Airsoft to Female XT60 (3pcs/bag)

    Combo Price: $1.58   IN STOCK
    Add to Cart

Further discounts available for registered & logged-in customers.

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
Total of 18 discussions.
Martin  1 points - 5/11/2015
Hello, i bought two of LiPos of this type for my Cyma CM.050 because I saw the video below that this batterie will fit in my gun. But there is no way this batterie will ever fit in an Cyma CM.050. There is just not enough space inside the receiver. I also doubt that this Lipo will fit in any AK's reciever. So don't buy this LiPo if you are planing to use in for your AKs otherwise you will be just as disapointed as I am right now. Again 20 €* wasted because some fool provides the world with wrong information.
WillF  2 points - 4/5/2015
Is each section one cell?
__HUHA  11 points - 2/2/2015
How does this battery fits in an airsoft replica Cyma CM.050 Romanian AIMS AK47
Jonathan  1 points - 1/24/2015
Will this fit in a G&G UMG?
__HUHA  11 points - 1/17/2015
How does this battery fits in a G36C airsoft replica
Customer Reviews
Create an account
Overall Rating
Like it?
great product! it can crank high torque motors and hard spring with high fire rate!

No comments. Reply..

Overall Rating
Like it?
I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day. Excellent buy and cheap enough to get a few just in case.

No comments. Reply..

Overall Rating
Like it?
This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear. Excellent ROF and easily pulls M120 springs on stock motors.

No comments. Reply..

Create an account
Overall Rating
Like it?
product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

No comments. Reply..

Overall Rating
Like it?
i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

No comments. Reply.. here to see all reviews
Aff. Link