Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 15C Discharge
> Batteries & Accessories > Airsoft Batteries
> Airsoft & Accessories > Lipoly Batteries


Turnigy nano-tech 1200mah 2S 15~25C Lipo AIRSOFT Pack

Turnigy nano-tech 1200mah 2S 15~25C Lipo AIRSOFT Pack

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Capacity: 1200mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 68.1g (including wire, plug & case)
Dimensions: 125x6x20mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology

*The length of balance charging wire may vary


Capacity(mAh) 1200
Config (s) 2
Discharge (c) 15
Weight (g) 68
Max Charge Rate (C) 5
Length-A(mm) 125
Height-B(mm) 20
Width-C(mm) 6
Update/Add my own data
Customer Data

Shipped from:
International Warehouse



  • Male Mini Tamiya/AR Drone/Airsoft to Female XT60 (3pcs/bag)

    Combo Price: $1.58   IN STOCK
    Add to Cart

  • Graphene Velcro Battery Strap 200mm

    Combo Price: $2.22   BACKORDER
    Add to Cart

  • MultiStar Velcro Battery Strap 300mm

    Combo Price: $1.81   BACKORDER
    Add to Cart

  • MultiStar Velcro Battery Strap 200mm

    Combo Price: $1.68   BACKORDER
    Add to Cart

Further discounts available for registered & logged-in customers.

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
Total of 2 discussions.
ben  1 points - 3/4/2013
Would this fit in a crane stock?
 Byron 3 points
Should do man i have a few guys at my airsoft club run them with crane stocks
Tobias  5 points - 7/17/2011
 Kellyann 16853 points
This is the strangest setup I have ever seen :)
 Julien 5 points
Does this battery fit in a RIS handguard for M4 ?
 Mangstap 4 points
*julien=yes this battery fit in RIS handguard. but i recommendation to use 3s thats its more powerfull than 2s. i use 3s in my toy M4RIS
Customer Reviews
Create an account
Overall Rating
Like it?
cool battery, not too useful as a separate packages, buy the single package instead

No comments. Reply..

Overall Rating
Like it?
Purchased 2 of these batteries to use in my Magpul Masada PTS. I built a Parallel adapter and was able to fit both batteries (All four cells) in the railed hand guard. This battery design is ideal for AEG's with tight spaces for batteries. I have been able to use these battereis in setups I normally need a PEQ box for. They also fit in Buffer tubes for AEG's wired to the rear. The ability to use them parallel in my Masada gives me the option of having 1200mah or 2400mah and still have some extra space left.

Affordable on any budget
Lipo power in a small package
Great trigger response

One battery is ideal for one day of play for me, but the 2 of them together ensures I have shots left for a prolonged day of play. Each unit takes about 10-15 minutes for a recharge with the charger set at 1.2amps.

1 comment. Reply..

Create an account
Overall Rating

Like it?
Works very well on a DSR rifle, don't take any space, and fits EVERYWHERE!

No comments. Reply.. here to see all reviews
Aff. Link