Please confirm your location:


USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Planes & Parts > Gliders

  RATED:

Phoenix 2000 EPO Composite R/C Glider (ARF)

Phoenix 2000 EPO Composite R/C Glider (ARF)
Phoenix 2000 EPO Composite R/C Glider (ARF)

This 2 meter wingspan glider takes 15 minutes to assemble and lasts a lifetime!
The wings and tail are made from tough EPO foam. However, the fuselage is made from a really strong blow moulded nylon skin*, Usually reserved for baby toys, with plywood formers, making it almost indestrucatable.

The virtually indestrucatable fuselage is smooth and ridgid yet still light enough for the glider to perform. Both the main wing and tail are screwed into place and the two wing halves have a carbon fiber rod for added strength.

The main wing requires 1 servo per aileron for strong control surface movement plus there is a pre-moulded slot so you can add your own flaps later. To complete this model you will require 4 9g servos, a 30A speed controller, a brushless outrunner, your own transmitter and receiver (Tx/Rx) and a 1300~1800mAh Lipoly battery.

This really is a super strong glider that takes 15 minutes to put together.

Spec.
Wingspan: 2 meters (78.74inch)
Length: 1160mm
Flying Weight: 980g
Servos: 4 x 9g (Required)
Motor: Brushless 2815/1050Kv (Required)
ESC Included: 30A (Required)

Required.
4 x 9g Servos
2815/1050Kv Brushless Motor with a 3mm shaft
30A ESC
LiPoly 1300~1800mAh 3S
Receiver
Tx/Rx

*Having a blow moulded fuselage on a glider is an excellent solution however it is not popular amongst manufacturers due to its high cost, effectively doubling moulding costs.

 



PRODUCT ID: Phoenix2-ARF

This product available from a warehouse near you!

2 1:IC/2:Elec 4 Channel 2000mm (78.74in) 1160mm (45.67in) 980g (2.156lb)

Weight: 3049g
Quantity: 
International Warehouse
stock
0
USA West Warehouse In Stock View Item
USA East Warehouse In Stock View Item
Price $59.99

esc
  • Hobby King 30A ESC 3A UBEC

    Combo Price: $8.95   IN STOCK



motor
  • Turnigy 2632 Brushless Motor 1000kv

    Combo Price: $14.11   IN STOCK



battery
  • Turnigy nano-tech 1800mah 3S 25~50C Lipo Pack

    Combo Price: $14.56   IN STOCK

  • Turnigy 1600mAh 3S 30C Lipo Pack

    Combo Price: $15.41   IN STOCK



servo
  • HXT900 9g / 1.6kg / .12sec Micro Servo

    Combo Price: $2.65   IN STOCK

  • HKSCM9-5 Single Chip Digital Servo (5V) 10g / 1.4kg / 0.09s

    Combo Price: $2.88   IN STOCK



acc.
  • HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 1)

    Combo Price: $28.66   IN STOCK

  • HobbyKing™ ECO8 150W 7A 8S Bal/Dis/Cyc Charger w/ acc.

    Combo Price: $37.95   BACKORDER

  • HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 2)

    Combo Price: $28.66   IN STOCK



Further discounts available for registered & logged-in customers.
STOCK ARRIVAL ALERT

Enter your email address to get an email the second new stock arrives.
Estimated factory delivery date;
 Customer rated
538
crowns
  
 
Total of 104 discussions.
DutchRC  85 points - 10/26/2014
 
Very nice flying plane! I must say I have replaced all servo's with digital MG's and the ESC with a hobbywing one.. But those changes were more a 'just to be sure' thing.. Flies very well!
Matija  2 points - 9/12/2014
 
The spinner can also take the 4mm motor shaft, I have bought a Turingy SK3 2830 motor 1130 kV with 30A ESC. and it is awsome it climbs at 45°** on 3S lipo. For slope soaring I add another 200g weight to CG.
 Napstr 1169 points
Hi Matija - it comes with two adaptors that fit the spinner 1 for 3mm motor shafts and 1 for 4mm motor shafts so you will be good to go.
DrkSlayer  8 points - 8/16/2014
 
Listed as esc included: 30A required but then below that on the required parts list it says 30A esc, so is it included or not?
 OldFartFlyer 1508 points
The ESC is included in the pnp version or RTF. If you purchase the ARF version you will need to supply your own ESC, Motor, Rx, and servos.
 Gel/|\ 107 points
It says "30A required", so not included after it says in "required parts" section, a 30A esc, so you need to buy it to complete your plane. If it is required, then you need to buy it if you haven't....
Maurizio  23 points - 8/14/2014
 
IT IS POSSIBLE TO KNOW WHERE TO BUY THE SPINNER PROP ,SHAFY AND MOTOR FOR REPLACEMENT PARTS? THX
 OldFartFlyer 1508 points
For folding prop / spinner search internet using the models wing registration number or "call sign". Various Chinese suppliers sell at around US$10. Not stocked by HK. For motor, consider using one of the many outrunners at HK. Discussion groups reveal a number of good choices depending on your flying purposes. Personally, I use the NTM3530 but you've got choices.
ALex_G  3 points - 7/31/2014
 
Please send the glider on the European stock
Customer Reviews
Overall Rating
alboot
38 likes
Value
Quality
2 thumbs up!
Well worth every penny or dollar I havent flown for 25 years, bought the ARF version use futaba radio gear, good power from standard esc and motor. I have also cut in the flaps very stable in flight. Have in flight move on youtube Mralboot666. Or search phoenix 2000 glider.


1 comment. Reply..

Overall Rating
SkyHawk Newbie
76 likes
Value
Quality
2 thumbs up!
Thermal Leaderboard: 1st Place.. MikeC47 Glider/plane name: Phoenix 2000 Thermal or Slope: Thermal Date and Time of flight: 9/16/2011 1:10PM Duration of flight: 52:23, 40 sec motor run Location: Marymoor R/C Club field, Redmond, WA, USA


No comments. Reply..

Overall Rating
traumkumy
6 likes
Value
Quality
1 thumbs up!
Hello, I earn this glider for around sixt month, it's a very good product for the price. I have used it as a first model, it fly gently and is capable of soaring decently. Jusr be warned that it's more soaring oriented than hotlining, if you use it for fast pass & acrobatic you will have to upgade motor & esc. Also a good idea is to change the stock servo, at least for ailerons, for some HTX900 witch are stronger and faster. Last concern for me, there is lot of thing to assemble once on the field witch take bit of time. Anyway it's a good glider, witch have very good apearance (looks very good in ther air) and nice flying caracteristics.


No comments. Reply..

Overall Rating
mikec@aloha.net
291 likes
Value
Quality
1 thumbs up!
my preferred setup: 4 hxt 900 servos (of course) 4 nylon clevises turnigy sk3 2830 920kv bl motor hobbywing 30am esc, since turnigy plush 30 esc is on back order turnigy mode 2 transmitter and receiver i'd fly up about 800 ft or more and shut off the motor. the wind and thermals take over. the pheonix 2000 would go upward. loops, rolls and inverted flights are easy. i prefer gliding. this is a well made and well designed glider. handles wind like nothing, floats and is acrobatic. awesome plane. one of my better purchases.


No comments. Reply..

Create an account
Overall Rating
twong
8 likes
Value
Quality
1 thumbs up!
Bought the kit version. Arrived in double packaging and in good condition. All parts wrapped in bubble wrap. This is my second Phoenix 2000 glider! Love this plane. Easy to fly. Glides very well with flaps.


No comments. Reply..

.....click here to see all reviews
Aff. Link