USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Pursuit V-Hull fiberglass racing boat is 820mm long, this is a large and powerful electric boat for experienced drivers. The hull is finished with only a small number of decals, allowing you to add your own.
Spec. Length: 820mm Width: 240mm Height: 80mm
Required. Radio System (2ch) & Receiver 1 x 3kg standard size servo 4000mah 4S 20C Lipo 125A Watercooled ESC 3660 size 1620kv Watercooled brushless Motor
Hello HK! You market of the good very adhesive tape in 19 mm for the waterproofness of the cockpit of boat, I do not find on the site there. Thank you!
I have one of these that I got cheap without the cowl. The Joysway hobbies short blade is exactly the same and I got a new cowl from the local hobby shop fits perfect!
I have to buy the V-Hull Boat Pursuit single hull, but I would support aquistare engine, transmission to the propeller, rudder and stabilizers, kindly send me the codes of these components and for this boat
thanks
Nuccio
Could someone give me a suggestion for stinger, rudder and trim tabs for this hull or is Vanquish parts fair enough? I do not need racing quality at this stage!
Everyone uses a Leopard 4074 2000-2200KV in general, getting about 60MPH(Top Speed) on 5s and this works perfectly and is reliable.
I'm trying out a Kershaw Designs(yet to be proven) Gen 2.2 Motor which is 2364KV, which should mean 65MPH on 5s.
These speeds can only be reached when combined with a M645 or X645 Octura Propeller from my experience. A 42mm Metal Prop will mean more running time and about 10MPH less speed on 5s. Hope this helps.
I had the stock motor (3660) and tried it on 4s and it got way too hot. The stock motor is good for using in a rescue boat on 3s but is no good if you want speed in the Pursuit.
Hey what is a good setup for this boat on 4-6s with like 5000mAh so the motor wont get hot, Turnigy Marine 180A Brushless Boat ESC and what motor tho? Thanks
I think parts will arrive on this 2nd week of May! Hopefully!
Customer Reviews
Overall Rating
mike
3 likes
Value
Quality
Like it?
this is a nice little boat but recommend you get the artr for 180.00 heres a very good and fast setup for this run a turnigy 2200 lose the stock drive assembly and just install 3/16 flex all the way down to stub. run 2 4s 3300 mah 30-40c (nano) to 4000 mah parellel install a m445 and a 200a or the 180 turnigy and watch this thing fly.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg&width=48)
.jpg&width=48)
.jpg)
