Please confirm your location:

Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Radios & Receivers > Complete Systems
> Radios & Receivers > HobbyKing


Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 1) (AUS Warehouse)

Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 1) (AUS Warehouse)
Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 1) (AUS Warehouse)

HobbyKing 2.4Ghz 6Ch Tx & Rx V2 (Mode 1)(THROTTLE ON RIGHT)
Hobbykings T6A 2.4ghz system is an entry level transmitter offering the reliability of 2.4Ghz signal technology and a receiver with 6 channels.
This transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

Key Features;
6-channel 2.4GHz transmitter with servo reversing.
Easy to use control for basic models.
Includes 6-channel receiver
Trainer system option.
This system must be programmed via PC cable.
1 x 2.4Ghz transmitter
1 x 2.4Ghz Receiver
1 x Bind Plug.

Only HK-T6A receiver is comptible with HK-T6A transmitter.
Only HK-T6Av2 receiver is compatible with the HK-T6Av2 transmitter.
** C-Ticked & certified for the Australian market.


Weight: 998g
Australia Warehouse
International Warehouse In Stock View Item
Price  $29.99

  • Turnigy XR7000 Receiver for Turnigy 4X/6X TX (AU Warehouse)

    Combo Price: $9.61   BACKORDER

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 201 discussions.
Logan  40 points - 10/1/2015
Artyom  6 points - 9/17/2015
my transmitter didn't bind to the receicer inclosed what do i do?
 NewToHobbyKing 16274 points
Artyom describe your procedure and we can see if you are doing something wrong. Step1 Set the receiver up. Bind Plug on BAT and power on any channel (Rx Should be Flashing). Step 2 Hold down Transmitter Bind Button down and turn it on. (Rx LED should do solid). Step 3 Power Down the RX and remove the Bind Plug (Also power down the Tx).. Step 4 Power Up the Rc System and the Rx Led should be on and solid when the Tx is on.
Don  1 points - 7/26/2015
Is this Tx compatible with Phoenix simulator/trainer program?
 Shane 2 points
Yes with the correct cable (with the security dongle for Phoenix's copy protection) - there are 2 cables available. A programming cable which talks to T6config to set the transmitter up. (Channel reverse, Rates, Expo) - You cannot program it without this cable! The second cable is the one you want - it will be specifically for flight sims and will NOT allow you to use the programming software. (You really need both :( )
Steven  16 points - 5/6/2015
Yes I understand that, BUT, I have ordered this item twice and both times the delivery from the international warehouse has failed to make it to me. I have no problem from the Australain warehouse. I made my first order in Dec 2014, then again in Feb2015. As this is for a class I am teaching I am getting very desperate. It would be heaps more convenient from the Australian warehouse, and if cost me an extra couple of dollars I wouldn't care. Thanks for the response.
 crazycarmaniac 545 points
bring the issues up with support staff. try purchasing with a courier or tracking number and then you can see where its going alternatly use a home address or another postal address you could posibly send it to
Steven  16 points - 5/3/2015
Why cant you buy a programming cable from the Australian warehouse?????
 NewToHobbyKing 16274 points
Steven two reason. One not many have asked and Two it cost more in postage to get the cable posted to you (By itself) than to buy from the int Warehouse : $4 Reg Post for 100g from HongKong.
Customer Reviews
Create an account
Overall Rating
3 thumbs up!
Good controller and reciever combo for the price, one thing to note however the sticks can get a little stuck make sure you check for full motion range before you use it to fly.

No comments. Reply..

Overall Rating
Like it?
What an amazing transmitter and receiver for the price! Sure, you have to initially setup the transmitter on a PC, but this is really easy, especially if you watch the videos and download the files that are on the hong kong version of this page. I was up and running in 10 minutes, with v-tail mixing, correct servo direction and sub trims set. I used this radio with the EPO parkjet that I got a couple of weeks ago, and I have to say it feels good in the hands, and I had no problem with interference despite having the plane over 200m away. Great job hobbyking, 5 stars for this one. :)

1 comment. Reply..

Overall Rating
Like it?
Type your review here.
Try to include as much data as possible.

Good controller and reciever combo for the price, one thing to note however the sticks can get a little stuck make sure you check for full motion range before you use it to fly.

No comments. Reply..

Overall Rating
Like it?
Very happy with this unit and the price . Dont forget to order the cable . Had some problems running the program on Windows Vista so hooked up my old comp running XP all good now

1 comment. Reply..

Create an account
Overall Rating

Like it?
I have three of these radios on T-rex 450,HK600 and 70mm EDF jet and have not had an issue and with them. Sooo cheap of price tag can`t praise them enough,even extra recievers are the cheapest I`ve seen. Light weight and no sattelite reciever - easy as. The software from the works well, but always have radio connected when changing settings. Only drawback is a laptop or web book is required at field to change settings/model program, but infite number of models can be saved and recalled. the same settings can be saved/loaded to multiple transmitters and or recievers with not even a trim change. Will recommend to everyone. Great work HK.

No comments. Reply.. here to see all reviews
Aff. Link